User Manual
Bluetooth Headset
BT150
FCC ID:2ACP4BT150
Product Parameters
|
BT150 |
|
10 |
Model |
|
Use |
10 m |
|
|
Distance |
|
|
V4.1 |
|
55mAH |
Version |
|
Battery |
|
|
|
Capacity |
|
|
180 |
|
4.5 |
Stand-by Time |
180 hours |
Talk Time |
4.5 hours |
|
DC5V/200mA |
|
2 |
Power Input |
|
Charging |
2 hours |
|
|
Time |
|
|
CVC6.0 |
|
HFP HSP A2DP AVRCP APTX |
Noise Reduction |
|
Protocol |
|
|
|
|
|
Skip |
Support |
Voice |
Support |
|
|
Prompt |
|
|
|
/ / / |
|
Function |
/ |
||
|
Caller report, line control answer/hang up/rejection/on-off, redial, |
||
|
volume adjustment, Chinese-English shifting, intelligent one-driving- |
||
|
two, music pause/play, up and down song switching |
||
|
ipad |
||
Product Application |
|
||
|
Support any mobile phones with Bluetooth device, iPad and desktop |
||
|
computer. The desktop computer without Bluetooth function can be used |
||
|
by matching with the Bluetooth adapter. |
||
|
|
|
|
Pairing and Connection
1
1. Keep the distance between the mobile phone and the headset within 1 m; the closer, the better. 2 “ ” 5
2. Press and hold the key 
for about 5 seconds, and then release it when the red and the blue lamps alternately blink. At this time, the headset has entered the paring mode.
3 ‘BT150’
3. Enable the Bluetooth function of the mobile phone, search the Bluetooth equipment, select ‘BT150’ sequence name for paring and connection. After connection is successful, the blue indicating lamp of the headset slowly blinks.
Notes:
‘0000’
If the mobile phone prompts to enter the pairing password, please enter ‘0000’ and confirm.
5 2
The pairing mode will be maintained for 5 minutes. If pairing and connection are unsuccessful beyond 2 minutes, the headset will automatically switch to the stand-by mode.
After pairing iscompleted, the headset and the handset will remember eachother, without pairing
Key functions of line controller
一一列举
(Vary with the brand, mode and system version of the mobile phone. The consumers shall make verification by themselves.)
/ : “ ” 5 /
On/off: Press and hold the key
for 5 seconds to turn on/off.
“ ”
Music or video pause: Press the key to pause playing, and press the key again to resume playback.
“+” “-”
Volume increase: Press and hold the key +; volume reduction: Press and hold the key -.
“+” “-”
Next song: press the key +; previous song: press the key -.
/ “ ”
Answer/hang-up: press the key to answer when the call is incoming, and press it again to hang up.
“ ” 2
Rejection: Press and hold the key
for about 2 seconds and then release it.
“ ” “+”
Chinese-English voice shifting: Press and + at the same time.
Setting method of intelligent one-driving-two
Step I: pair and connect the first mobile phone
1. 5
1.In the off state of the Bluetooth headset, press and hold the multifunction key for about 5 seconds and enter into the pairing state when the red and blue headset indicating lamps alternately and quickly flash.
2. A ‘BT150’
2.Enable the Bluetooth function of the mobile phone A, search Bluetooth to find ‘BT150’ sequence name to pair and then connect.
Step II: pair and connect the second mobile phone 1. A
1.Turn off the Bluetooth headset to disable the Bluetooth of the mobile phone A. 2. 5
2.In the off state of the Bluetooth headset, press and hold the multifunction key for about 5 seconds and enter into the pairing state when the red and blue headset indicating lamps alternately and quickly flash.
3. B ‘BT150’ \
3.Enable the Bluetooth function of the mobile phone B, search Bluetooth to find ‘BT150’sequence name to pair and then connect.
Loading...