Sensoria SUA01E User Manual

USER GUIDE

A step-by-step Guide

Summary

• Introduction

• The Package

• Charging Sensoria Core

• Sensoria Core LED Color Coding

• Connecting Sensoria Core to the Socks

• Connecting Sensoria HRM to the T-Shirt or Sports Bra

• Sensoria Run Setup

• Installation

• First launch

• Pairing Sensoria Core (and Sensoria HRM)

• App Tour

• Web Tour

Introduction

• This guide provides an overview of the initial setup, using the app,

and charging operations related to Sensoria Run and the Sensoria

Smart Running Socks

• We hope you have fun trying out our wearable system!

• For questions or issues, please contact:

[e-mail]

• You can also submit feedback from within the app or

https://my.sensoriafitness.com

The Package

• The following accessories are included in

your package:

• 1 x Sensoria Core (shoe sensor) + 1 Charger

• 1 pair of Sensoria Smart Socks

• 1 x USB charging cable

• Optional (require purchase of Running System):

• Sensoria Smart T-Shirt or Sports Bra

• Sensoria Hear Rate Monitor

• Access to Sensoria Run app and Web Dashboard

Charging Sensoria Core

• Insert the USB end of the charging cable in a power USB
port (computer or outlet USB adapter, not provided)

• Insert the micro-USB end of the charging cable in the

provided charging dock

• Insert Sensoria Core in the charging dock, starting from
the tabs, and pressing on the lid to complete the
insertion

• The sensors will blink red until the charge is completed,
and then turn to solid green

• If you don’t see red blinking, try to remove the sensor

from the charger and insert again (shoe sensor)

• Charging time is about 45-60 minutes

Tabs

Sensoria Core: LED Color Coding

• 3 white flashes followed by red flash: start/reboot of device

• When NOT connected to a charger/USB cable:

• 3-seconds green blinking: device ready to connect

• 3-seconds blue blinking: device connected to the app

• 3-seconds red blinking: low battery

• No blinking: device turned off

• When connected to a charger/USB cable:

• 3-seconds red blinking: charging battery

• Solid green: battery charger 100%

Connecting Sensoria Core to the socks

• Insert Sensoria Core in the dock on the back
of the right sock, starting from the tabs,
pressing on the lid to complete the insertion
in the dock

• If correctly inserted, Sensoria Core will blink
red then green (or blue when connected to

the app)

• Remove the Core and
repeat the operation if
no blinking occurs

• If no blinking appears,
put the sensor on
charger

Tabs

TabsTabs