Sennheiser SDC 8000 ID User Manual

SDC 8000 ID

Conference and Information Systems | SDC 8000

General Description

Designed according to international standards, the SDC 8000 ID interpreter unit is an
ideal choice for large, international conferences with up to 28 translated languages
and up to eight interpreter units per booth. The SDC 8000 ID is extremely easy to
use. All important information and settings are shown on a back-lit graphic LCD
display. The incoming languages can be chosen via three configurable relais keys.
A language quality indicator marks the language which has been translated several
times, thus avoiding possible information loss.

Cat. No. 009418

Tec hnica l Data

Frequency response ................................. 100 – 14,000 Hz

Pick-up pattern .........................................................cardioid

Headphone connector.................. 3.5 mm mono (> 32 Ω)

Power supply.............................................................. 48 V DC

Power consumption............................................... max. 4 W

Operating temperature .........................................0 – 50 °C

Standards...................................................ISO 2603; IEC 849

Colour..........................................................Pantone Black 7C

Housing ..............................................................................ABS

Dimensions............................................150 x 80 x 185 mm

Gooseneck length ....................................................380 mm

Weight............................................................................. 675 g

Features

j

Gooseneck microphone with red LED ring

j

Two 3.5 mm headphone jacks

j

Two RJ 45 sockets for connecting up to 15 units in one cable line

j

Three tone controls for volume, mid-range and treble

j

Built-in high- quality loudspeaker (automatically muted when a

microphone in the booth is switched on)

j

Loudspeaker volume control

j

Loudspeaker channel selection for incoming language

j

Three configurable relais keys for incoming languages

j

Two A and B output channels, channel selection key and “ENGAGED“ LEDs

j

Configurable B channel

j

Back-lit graphic LCD display for relay languages, quality of relay languages,

loudspeaker language, set-up mode (only during basic configuration)

j

Large, red MIC key with LED

j

Mute key

j

Message keys with LED for displaying text messages

j

Delivery includes: 1 SDC 8000 ID Interpreter Unit

Accessories

j

RJ 45 conference bus cables, type 24 AWG,

available lengths: 2 m, 3 m, 5 m, 10 m, 20 m, 50 m

j

HD 410-D, HD 1029 headphones