Sennheiser ORL 12 Quick Start Manual
ORL 12 QuickStart Guide
What’s in the box
Your new handset lifter includes the following
components:
1. QuickStart Guide
2. User Manual
3. ORL 12 lifter
4. Adhesive Parts
5. Connector cable
6. Extension Bar*
7. Extra ring detector with extended cord*
*Not needed for most phones
2. Attach the ORL 12 to your
desktop telephone
1. Test the placement of the lifter by
holding it to the left edge of the phone
underneath the handset and turning
the headset on and o. You’ll know
you’ve found the right placement when
the lifter lifts the handset far enough
to open the phone line and lowers the
handset so that it hangs up the call.
2. Remove the backing from the tape
underneath the lifter. Be sure to remove
the circular tape pad that covers the
preinstalled ring detector too.
3. Remove your telephone handset and
aach the lifter to your phone.
CALL
1-800-HEADSETS (1-800-432-3738)
CLICK
www.headsets.com/support
2
1
Connect the ORL 12 in 3 easy steps
Thank you for purchasing the ORL 12 handset lifter!
After the quick and easy setup you’ll be more productive than ever; free to walk,
talk, and work up to 400 feet from your desk. Check out the video setup guide at
headsets.com/support
Remove all
tape backing
including
from the ring
detector
Don’t
forget the cords
inside the
package
Over
1. Connect the ORL 12 to your headset base
1. Plug the end of the included connector cord with the purple tag into the
ACC jack on the back of your headset base.
2. Plug the other end of the connector cord into your new handset lifter.
1
2
ORL 12 QuickStart Guide
CALL
1-800-HEADSETS (1-800-432-3738)
CLICK
www.headsets.com/support
Now you’re ready to make a call!
Just press the button on your headset to lift the receiver and call someone. Why not
make that first call to us at Headsets.com. We’d be more than happy to hear from
you. Plus, one of our Headset Advisors can help you fine tune the settings on your
headset and lifter so you get the most value out of your purchase. 1-800-HEADSETS
(1-800-432-3738) M - F 6:00am - 4:30pm Pacific Time
Call us at
1-800-HEADSETS
(1-800-432-3738)
Monday-Friday 6:00am - 4:30pm Pacific Time
P
FREE Lifetime Product Support
We’re experts and we’re here to help you for
the life of your headset. Plus, your lifter comes
with a 2-year full replacement warranty.
Jenny Noyola
Customer
Service
Manager
3. Record your ring tone
1. Place a test call to your phone so that the
ORL 12 can record your phone’s ring
tone.*
2. Press and hold the P1 buon until the
light on the lifter begins to ash BLUE,
then immediately let go.
3. When the recording is successful, the
light on the lifter will ash RED and turn
o.
*Ensure there is no background noise when
making your test call, and that your phone’s
ringer is turned all the way up.
1
1. Make sure the lifter is turned o (the
blue light should be o).
2. Press and hold both the P1 and P2
buons on the lifter until the lifter light
alternates RED and BLUE, then release
both buons. The lifter will lift to the
default height.
3. Press P1 to raise the height, and P2 to
lower the height.
4. Once you’ve got the height just right,
press the P1 and P2 buons at the same
time to save the new lifter height.
Optional: Adjust the lifter height
If the lifter doesn’t seem to be lifting your handset high enough, or if it’s
lifting it too high, these steps will get it set up just right.
Press P1 to
raise the height,
and P2 to lower
the height
© 2013 Headsets.com, Inc. All rights reserved.
Loading...