PRODUCT SPECIFICATION
MKE 2
Clip-On Microphone
The MKE 2 Gold is a high-quality, small clip-on microphone for every area of live sound transmission. It sets the
highest benchmarks in sound quality and robustness under
tough on-stage conditions. The ultra-lightweight Umbrella
Diaphragm™ and the welded housing offer optimal protection against sweat.
FEATURES
• New Umbrella Diaphragm™ protects the mic against
sweat
• Very high sound pressure handling capability
• Versatile attachment due to an extensive range of
accessories
1/2
PRODUCT VARIANTS / DELIVERY INCLUDES
Slip-on caps Cover-up Wind
MZC 2-1 MZC 2-2 MZW 2 MZQ 02 Applicable toConnector
MKE 2-4 Gold-C
MKE 2-5 Gold-C
MKE 2-60 Gold-C
MKE 2-ew Gold
MKE 2 P-C
ARTICLE NUMBERS
MKE 2-4 Gold-C Art. no. 004736
MKE 2-5 Gold-C Art. no. 004735
MKE 2-60 Gold-C Art. no. 004733
MKE 2-ew Gold Art. no. 009831
MKE 2 P-C Art. no. 004224
screen
Clip
3-Pin SE
open end
3.5 mm
XLR-3
SK 50/SK 250/SK 6000/
SK 9000/SK 2000/SK 5212
System K6
ew G3/ew G4/ew D1/
Speechline DW/XSW
Video camera
Mixing console
FREQUENCY RESPONSE
dBV
-30
-40
-50
-60
-70
-80
10 20 50 100 200 500 1000 2000 5000 10000
dBV
-30
-40
-50
PRODUCT SPECIFICATION
MKE 2
Clip-On Microphone
2/2
capsule
only
MZC 2-1
20000 Hz
MZC 2-2
-60
-70
-80
10 20 50 100 200 500 1000 2000 5000 10000
dBV
-30
-40
-50
-60
-70
-80
10 20 50 100 200 500 1000 2000 5000 10000
SPECIFICATIONS
Transducer principle pre-polarized condensor
microphone
Pick-up pattern omni-directional
Sensitivity (free field, no
load) (1 kHz)
Max. SPL at 1 kHz 142 dB
Frequency response 20 to 20.000 Hz ± 3 dB
Equivalent noise level
A-weighted (DIN IEC 651)
Equivalent noise level
CCIR-weighted (CCIR
468-1)
Connector see product variants
Cable length approx. 1.60 m
5 mV/Pa, ± 3 dB
26 dB
39 dB
20000 Hz
MZW 2
MZW 02
+
MZW 2
20000 Hz
Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · www.sennheiser.com