Question 1: What is the primary use of the Griff + Speise Modul K 3 Grips?
A1: The grip primarily acts as the handheld and powering module designed for the Sennheiser electret condenser modular microphone system which allows different heads to be used in different recording situations
Q2: What is the duration of the battery?
A2: Approximately 600 hours of use is provided before a new battery is needed.
Q3: Is it possible to use phantom power with this device?
A3: Indeed, external phantom power supplies between 12 and 48 V may be employed with the K 3.
Q4: Which microphones are used in conjunction with the K 3?
A4: This K 3 can be used with multiple microphone heads like the MKE 10-3, ME 20, ME 40, ME 80 and ME 88 which provide varying degrees of directional properties for different recording purposes.
Q5: How can I check the battery status?
A5: The K 3 is equipped with a luminous diode that comes on when the device is turned on determined so whether the battery voltage is adequate. If the LED is faint then the battery is to be changed though some charge might still remain.
Q6: Describe the roll-off filter function.
A6: The roll-off filter is utilized to minimize low frequency ‘distortions’ caused by environmental audio, handling noise and wind noises, or other low frequency sounds. It is fitted with three positions for different levels of powering down.