Page 1
Instruction manual
EZT 3012
Induction loop
Page 2
Important safety instructions
• Please read this instruction manual carefully and completely
before using the product.
• Make this instruction manual easily accessible to all users at all
times. Always include this instruction manual when passing the
product on to third parties.
• Do not use the product in situations which require special attention (e.g. when performing skilled jobs).
• Always keep the product dry and do not expose it to extreme
temperatures.
Intended use
Intended use includes:
• having read this instruction manual, especially the chapter
“Important safety instructions”,
• using the product within the operating conditions and limitations described in this instruction manual.
“Improper use” means using the product other than as described in
this instructions, or under operating conditions which differ from
those described herein.
1
Page 3
The EZT 3012 induction loop
The EZT 3012 induction loop is an accessory for Sennheiser infrared and RF receivers as well as for conference units of a conference
system. The EZT 3012 inductively couples the audio signal from the
receiver/conference unit to hearing aids.
Using the volume control on the receiver the sound may be easily
adjusted to suit an individual user’s hearing. This allows hearing aid
wearers to take advantage of an interference free, optimum sound
quality, wireless, listening experience.
Delivery includes
1 EZT 3012 induction loop
1 instruction manual
2
Page 4
Preparing the EZT 3012 for use
CAUTION! Danger due to magnetic fields!
If you connect the EZT 3012 to devices that are not
designed for use with the induction loop, a magnetic
field can be generated which could cause dangerous
interference with cardiac pacemakers and implanted
defibrillators.
왘 Connect the induction loop only to Sennheiser
devices.
Connecting the induction loop
왘 Connect the 3.5 mm jack plug of the induction loop to the socket
on your receiver or to the corresponding audio output of your
conference unit.
3
Page 5
왘 Set your hearing aid to the T-position.
쐃
쐇
If your hearing aid has no T-position, please contact your
hearing aid acoustician.
For alternative connection possibilities to your hearing aid as
well as the connection to cochlea implants, please contact
your hearing aid acoustician.
Wearing a receiver
Depending on the receiver used, you require a lanyard or a clip
(see “Accessories” on page 6) in addition to the EZT 3012 induction
loop.
왘 Attach the optional lanyard 쐃 or the clip 쐇 to your RI 830 S or
RR 840 S receiver.
If you have any questions, please contact your Sennheiser
partner.
4
Page 6
Putting the EZT 3012 into operation
CAUTION! Hearing damage due to high volumes!
Listening at high volume levels for long periods can
lead to permanent hearing defects.
왘 Before using the receiver or the conference unit,
set the volume to a low value.
왘 Do not continuously expose yourself to high
volumes.
왘 Place the induction loop around your
neck, with the Sennheiser logo facing
away from your body.
왘 Switch your audio source on.
왘 Switch the receiver or the conference unit on.
Cleaning the EZT 3012
왘 Use a slightly damp cloth to clean the induction loop.
5
Page 7
Accessories
For the RI 830 S and RR 840 S receivers, the following accessories
are available from your specialist dealer:
Cat. No. Accessory/spare part
528184 Clip
528185 Lanyard
Specifications
EZT 3012 induction loop
Audio connector 3.5 mm stereo jack plug
Cable length
induction loop
connection cable
Impedance 28 Ω at 1 kHz
75 cm
40 cm
6
Page 8
Manufacturer Declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months
on this product. For the current warranty conditions, please visit
our web site at www.sennheiser.com or contact your Sennheiser
partner.
WEEE Declaration
Please dispose of this product at the end of its operational
lifetime by taking it to your local collection point or recycling
centre for such equipment.
7
Page 9
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Printed in China
Publ. 04/09
532880/A01
Loading...