Sennheiser e 609 Datasheet

Features—Benefits

• Metal construction—rugged and reliable

• Super-cardioid pick-up pattern—isolation from other on-stage signals

• Hum compensating coil—reduces electrical interference

• Neodynum ferrous magnet with boron—keeps mic stable regardless of climate

• Falcon ring—consistent sound over time

Technical Data

Pick-up pattern super-cardioid
Frequency response 40–18,000 Hz
Sensitivity 1.5 mV/Pa at 1 kHz, nominal
Nominal impedance 350 Ω
Min. terminating impedance 1 k
Dimensions in inches 2.17 x 1.34 x 5.28
Weight 6.34 oz

e 609

Supplied Accessories

1 protective pouch
1 MXQ 800 microphone clip

e 609 Dynamic Microphone

The e 609 has an excellent transient response. Its lateral mounted capsule has been specially
developed for miking guitar cabs face on and extremely close to the signal source. The e 609 is
also suitable for drum miking, particularly toms, where the microphone’s profile allows the
capsule to be positioned close to the drum skin. Sound inlet basket: refined steel.

Architect’s Specifications

The unit shall ba a super-cardioid instrument microphone, with a hum compensating coil. The
frequency response shall be 40 Hz–18 kHz, with sensitivity (free field, no load) of 1.5 mV/Pa at
1 kHz. The nominal impedance shall be 350 Ω, and the min. terminating impedance shall be 1 k.
The unit shall be 2.17 x 1.34 x 5.28 inches, and weight 6.34 oz. The unit shall be a Sennheiser
e609 microphone

Sennheiser Electronic Corporation, 1 Enterprise Drive, Old Lyme, CT 06371
Telephone: [phone] • Fax: [phone] • Web: http://www.sennheiserusa.com

Sennheiser Mexico:

Av. Xola 613, PH6, Col. Del Valle 03100, Mexico, DF. Telephone: [phone]. Fax: [phone]
Sennheiser Canada: 221 Labrosse Ave, Pte-Claire, PQ H9R 1A3. Telephone: [phone]. Fax: [phone]
Manufacturing Plant: Am Labor 1, 30900 Wedemark, Germany

Optional Accessories

Microphone clip MZQ 100
21' XLR Microphone cable MCZIN