Sennheiser ACA 3 User Manual

ACA 3
Operating elements
Front
DC ON/OFF/LIMIT
LEDs
ACA 3
Quick Guide
Kurzanleitung Guide de démarrage rapide Guida rapida Instrucciones resumidas Instruções resumidas Beknopte gebruiksaanwijzing Krótka instrukcja obsługi Snabbguide
Sennheiser Documentation App
Kort vejledning Pikaohje
Γρήγορος οδηγός
Kısa Kılavuz
Краткая инструкция
快速指南 快速使用指南
クイックガ イド
퀵 가이드
Setup
100-240V~/50-60 Hz/1A
A1 B1 A2 B2A3B3 A4 B4
DC ON
DC LIMIT
DC OFF
RF ON/OFF
PUSH & HOLD DC ON/OFF
EU US UK
Quick Guide
Safety
Guide
RF out A
RF in A3
RF in A1
RF in A4
RF in A2
ANTENNA RF INPUTS DC OUT 12V/450mA
DC ON
DC LIMIT
DC OFF
RF ON/OFF
ACA 3
Back
100-240 V~/50-60 Hz/1 A
Mains socket
BNC socket
RF OUT A
PUSH & HOLD DC ON/OFF
4 BNC sockets A1 to A4 RF IN
DC OUT
RF/DC ON/OFF
BNC socket
RF OUT A
RF in A3
RF in A1
RF in A2
RF out A
RF in A4
ANTENNA RF INPUTS DC OUT 12V/450mA
LEDs
RF in B1
RF in B2
RF in B3
ACA 3
BNC socket
RF OUT B
RF out B
RF in B4
WARNING: DO NOT CONNECT TRANSMITTING DEVICES DIRECTLY TO THIS UNIT
ATTENTION: NE PAS CONNECTER D‘EMETTEUR DIRECTEMENT A CET APPAREIL
4 BNC sockets B1 to B4 RF IN
DC OUT
ON/OFF
ON/OFF
ON/Standby
short long
A1 B1 A2 B2
DC ON
DC LIMIT
DC OFF
RF ON/OFF
RF in B1
RF out B
RF in B3
RF in B2
WARNING: DO NOT CONNECT TRANSMITTING DEVICES DIRECTLY TO THIS UNIT
ATTENTION: NE PAS CONNECTER D‘EMETTEUR DIRECTEMENT A CET APPAREIL
RF in B4
PUSH & HOLD DC ON/OFF
A3
B3 A4 B4
ACA 3
LED on
LED RF
by memory
ACA 3 on
standby
blinking
off
or online at
www.sennheiser.com/download ACA 3_
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com
Printed in Germany, Publ. 10/19, 583927/A01
Specifications
Frequency range
Gain
Output voltage
Connector
Power supply
RF input
RF output
Specials
Operating relative humidity
Operating temperature range
Storage temperature range
Dimensions (incl. rack mount ears)
Format
Weight (incl. plug, cable)
LED DC
by
off
memory
OFF
100 - 240 V~
100-240V~/50-60 Hz/1A
RF out A
RF in A3
RF in A1
RF in A2
RF in B1
ANTENNA RF INPUTS DC OUT 12V/450mA
RF in B2
RF in A4
RF out B
RF in B3
WARNING: DO NOT CONNECT TRANSMITTING DEVICES DIRECTLY TO THIS UNIT
ATTENTION: NE PAS CONNECTER D‘EMETTEUR DIRECTEMENT A CET APPAREIL
RF in B4
Operating modes
470 - 798 MHz
0 dB (±3 dB) @ 470-790 MHz
12 V, 250 mA max (overload protected)
BNC female, 50 ˝
100-240 V~/ 50-60 Hz / 1A
+10 dBm max 10 mW / channel
IP3: >37 dBm (typ.); 1 dB cp: >20 dBm
Channel isolation (when switched OFF): 69 dB (typ.)
5 to 95%
-10 °C to +40 °C
–20 °C bis +70 °C
approx. 43 x 483 x 205 mm
19 inch, 1U
approx. 2750 g
PUSH & HOLD DC ON/OFF
RF ON/OFF + LED DC ON/OFF
DC ON
DC LIMIT
DC OFF
RF ON/OFF
short long
LED DC
LEDs
ACA 3
DC RF
Setup
OR
RF on/off
DC on/off
Connecting devices
100-240V~/50-60 Hz/1A
-
-
on
blinking
off
SYNC
LIMIT
-
ESC
SYNC
Transmitter
RF out A
RF in A3
RF in A1
RF in A2
RF in A4
2 x 4 ANTENNA RF INPUTS DC OUT 12V ˛ 250mA
RF in B1
RF out B
WARNING: DO NOT CONNECT TRANSMITTING DEVICES
RF in B3
RF in B2
DIRECTLY TO THIS UNIT
ATTENTION: NE PAS CONNECTER D‘EMETTEUR DIRECTEMENT A CET APPAREIL
RF in B4
Receiver
> 0.5 m
> 1 m
Example 1: Studio Comlex
RF IN A1 - A4
RF IN B1 - B4
Studio 2Studio 1 Studio 3 Studio 4
Example 2: Large Church
RF IN A1 - A4
RF IN B1 - B4
4x RF IN 4x DC OUT
A1 B1 A2 B2A3B3 A4 B4
DC ON
DC LIMIT
DC OFF
RF ON/OFF
PUSH & HOLD DC ON/OFF
4x RF IN 4x DC OUT
ACA 3
4x RF IN 4x DC OUT
A1 B1 A2 B2A3B3 A4 B4
DC ON
DC LIMIT
DC OFF
RF ON/OFF
PUSH & HOLD DC ON/OFF
4x RF IN 4x DC OUT
ACA 3
Loading...