Sennheiser 810 User Manual

Bedienungsanleitung

Instruction Manual

Notice d´emploi

Istruzioni per l´uso

Instrucciones para el uso

Gebruiksaanwijzing

Bruksanvisning

Set 810

SET 810
Thank you for choosing Sennheiser! Over half a century of accumulated
expertise in the design and manufacture of high-quality audio equipment
has made Sennheiser a world leader in the field of audiology.

The SET 810 is an assistive listening system for your radio, TV, hi-fi system or
similar sound sources at the volume you choose. The system allows you to
move around freely without the constrictions of cables within the room
where the transmitter is placed. The system uses invisible infrared light for
sound transmission.

English

1

Delivery includes
The Set 810 consists of the following

components and accessories:

- Stethoset receiver RI 810

- Transmitter
(charging unit) TI 810

- Rechargeable battery BA 151

English

- Power supply NT 810

- Connecting cable for headphone output

- Adapter for SCART socket
(except USA/Canada)

- Adapter for RCA sockets
(USA/Canada only)

- Replacement ear pads

- Instruction manual

2

Connecting the transmitter (charging unit)
The rear of the transmitter is fitted

with two audio inputs: A socket
(LINE) for connection to the audio
output or the headphone socket on
your TV, and a microphone socket
(MIC).

Plug in one end of the connecting cable to the audio output or the headphone
socket on your TV, and the other end to the LINE socket on the transmitter.

If your TV set is fitted with a SCART socket, use the supplied adapter.
If your TV does not have a headphone or SCART socket, you can use an
external microphone which is described in the section ACCESSORIES.

Only use one of the two audio inputs on the transmitter (MIC or LINE).
Connect the power cable to the POWER socket on the transmitter. Plug the

power supply into a household electrical outlet.

English

3

Where to place the transmitter
Place the transmitter so that the

infrared light beam is pointed
directly at the receiver, i.e. there
should be no obstacles in the light
path between transmitter and
receiver. Guide the cables
backwards.

English

Avoid exposure to direct sunlight.
Direct sunlight may interfere with
the reception and may damage the
transmitter.

Pull the power supply unit out of the electrical outlet when the unit will not
be used for extended periods of time.

4

Using the stethoset receiver
When putting the stethoset receiver on,

make sure the operating control is
pointing downwards and the letters are
at the front.

The stethoset receiver automatically
turns on if you pull the earbows apart.

English

5