Senco SHF15 User Manual

Fastening Solutions
SHF15 Manual
Hardwood Flooring Nailer
Tool Specifications:
Item #: 730001N (Sequential actuation trigger) Tool Weight: 7.6 lbs (3.45 kg) Height: 17-3/4” (451 mm) Length: 14-3/8" (365 mm) Cleat Capacity: 110 Mode of Operation: Sequential Actuation
Fastener Specifications:
The SHF15 drives 1 1/2" (38mm), 1 3/4" (45mm) or 2" (50mm) “L” type cleat nails.
213/
4
11/
RW
2
The SENCO® SHF15's ratchet system gives do-it-yourself, rental, novice and professional floor installers a multiple-hit tool with ample power to set nails. Nails not fully driven by the first blow remain positively positioned for additional strikes. It has a rugged composite base that virtually eliminates scratching and damage to the surface of both unfinished and prefinished wood. And at only 7.6 lb, the SHF15 is ergonomically designed with the hardwood installer in mind.
Applications:
For the installation of 1/2" (12mm) to 33/32" (26mm) hardwood flooring. (1/2" applications require optional adapter.)
.
Features and Benefits:
• Mallet-actuated firing simultaneously sets floor boards (tongue into groove) and drives cleat nails at an ideal 45°angle
• Unlike staples, cleat nails minimize wood splitting and still allow for expansion and contraction of flooring materials.
• Easy-to-use ratchet drive system allows cleats to be driven with multiple blows
• Lightweight - only 7.6 lb
• Composite base reduces scratching and surface damage
• Mallet actuated (mallet included)
• Ergonomically designed for improved productivity, less fatigue and ease of operation
For additional information on how SENCO Power Fastening Systems will save you time, reduce costs, and increase quality, call our toll-free Action Line: 1-800-543-4596 to find your nearest Authorized Senco Dealer or Distributor. Visit our web site at: www.senco.com
Seq uen tial Actua tion Trigg er (also known as restrictive trigger or trigg er fire) op erates in the fol lo wi ng a seq uen ce - dep ress the safety element at the no se of tool against the work surface then p ul l the trigg er. After each fastener is driven , release th e trig ger and lift the too l off the work surface before startin g the sequence again. T his trig ger is recommend ed and acceptable fo r most appl ication s.
Alw ays read the Operators Manual and Safety Instructi on s wi th all to ol s to ensure proper use an d safety precaution s or log on to ww w.sen co.com or call 1 -80 0-543 -4596 for more in formation on SENCO’s trigger systems. Choo se the righ t trigger system for your sp ecific needs!
©2005 SENCO Products, Inc. www.senco.com
Safety First.
The only way to work.
®
Loading...