Fastening Solutions
SCN56
Medium Coil Nailer
™
The SCN56 is a superior siding tool that drives full round head nails
from 1-7/8” to 2-1/2” in length and from .092 to .099 nail shank
diameter. The SCN56 is a lightweight, rugged and dependable
multi-purpose coil Nailer. The SCN56 coil Nailer has a unique mode of
operation. The SCN56 allows the operator to select either a dual action
or restrictive mode of fastening by simply switching the trigger – No
need to change parts!
O
R
U
L
N
L
D
U
F
H
D
E
A
Tool Specifications:
Item #: 990001N - Switchable triggering system
Tool Weight: (Unloaded) 6 lbs. (2.73 kg)
Height: 12" (270 mm)
Length: 12-1/2" (280 mm)
Collation: Wire weld coil
Mode of Operation: Switchable triggering system –either sequential
or contact actuation trigger mechanism.
Hose Fitting: 1 ⁄4 " NPT
Fastener Specifications:
Drives full round head nails from 1-7/8" — 2-1/2" in length and from
.092 — .099 nail shank diameter.
21/
21/
2
4
ED (.0915)
EL (.0915)
BK (.099)
BE (.099)
217/
8
Applications:
Siding, exterior decks, decking, exterior trim, fencing, subflooring,
wood shingles, crate and box assembly and floor sheathing.
Features and Benefits:
• Switchable trigger — Allows the operator to select the fastening
mode (Dual action or restrictive)
• Dual collation — Allows the choice between wire weld and SENCO
plastic sheet collation. (Plastic sheet collation is limited to direct
industrial customers at this time.)
• Adjustable depth of drive — Allows for consistent and controllable
drive
• Comfort grip — Reduces operator fatigue
• Adjustable exhaust deflector — Direct air in a variety of directions
• Detachable no-mar pad — Protects work surfaces
• Fastener Range — 1-7/8"—2-1/2"
• Light weight — 5.8 lb
• High load capacity — Holds up to 350 nails
Seq uen tial Actua tion Trigg er (also known as restricti ve trig ger o r
trigger fire) op erates in th e followin g a sequ ence - d epress the safety
element at the n ose of too l again st the work surface th en pull the trigger.
After each fastener is driven, release the trigg er and li ft th e to ol o ff th e
work surface before starting th e sequ ence ag ain . Th is trigg er is
recommend ed and acceptable fo r most appl ication s.
Con tact Actua tion Trigg er (also kn ow n as du al action , bo un ce or
bo ttom fire) operates i n the follo wi ng sequence- pul l the trigg er first and
keep th e trig ger p ul led whi le moving th e to ol al on g the work surface
with a bo uncing motion , d epressing th e safety element at the nose of
the too l again st the work surface w here the fastener is to be d riven. T his
trigger is recommend ed for use by trained professionals on ly in hig h
prod uction or volume appl icati on s.
Alw ays read the Operators Manual and Safety Instructi on s wi th all to ol s
to ensure prop er use and safety precautio ns or l og o n to
www .senco.co m or call 1-800-54 3-459 6 for more info rmation o n
SENCO’s trigg er systems. Choose the righ t trig ger system for your
specific n eeds!
For additional information on how SENCO Power Fastening Systems
will save you time, reduce costs, and increase quality, call our toll-free
Action Line: 1-800-543-4596 to find your nearest Authorized Senco
Dealer or Distributor . Visit our web site at: www.senco.com
©2005 by Senco Products, Inc. www.senco.com
®
Loading...