SCN55S Siding Coil Nailer
The rugged SCN55S Siding Coil Nail from Senco has
the capacity to drive full round head nails up to 2½"
long. This lightweight, powerful tool holds up to 350
nails and is designed for hours of use with minimal
operator fatigue.
R
Applications:
For siding, sheathing, decking, subfloors, exterior trim,
fencing, and wood shingle application in on-site and
manufactured housing. Also for industrial pallet
construction, pallet repair, crate and box assembly
and wood storage sheds.
Features:
• Drives full round head nails 1¼" to 2½" long
• Nail coils available in wire weld. Flagless plastic
collated nails will be available in the near future
• High load capacity (350 nails)
• Adjustable depth-of-drive for consistent and
controllable nail countersink
• Balanced 5.8 lb. weight for one-handed operation
• Comfort-grip handle for hours of comfortable use
• One full year warranty
Tool Specifications:
SCN55S Siding Coil Nailer
Tool Weight: 5.8 lbs. (2.6 kg)
7
Height: 12 " (327 mm)
/
8
Length: 10½" (267 mm)
Width: 5¼" (133 mm)
Nail Capacity: 200-350
Nail Collation: Wire Weld
Operating Pressure: 70-100 psig (4.8-6.9 bar)
Mode of Operation: Tools are available with either
Restrictive Trigger or Dual Action activating
mechanism. *
Hose Fitting: ¼" NPT
Fastener Specifications:
Wire Collated**
Lengths
Millimeters
Shank
Product Code
Available In
Smooth Shank Nails
Inches
2"
50
.092
ED21
2¼"
57
.092
ED23
•Regular Galv. •Reg. Galv. •Reg. Galv.
Ring Shank Nails
1 "
7
/
8
2¼"
5748
.092.092
EL23EL20
•Brt. Basic•Weatherex II Galv.
7
/
8
(6d) (7d) (6d) (7d)
EL20
EL23
22¼ 2¼1
ED21
ED23
NOTE: The SCN55S has the capacity to drive nails ranging in size from 1¼" to 2½" in length, and
the capability to drive flagless plastic collated nails.
**Other sizes available by special order
.092
.092
* “Restrictive Trigger” activated tools are
used for applications where precision nail or
staple placement is desired. You must first
depress the safety element where you want
to drive a nail or staple and then pull the
For additional information on how Senco fastening
systems will save you time, reduce costs, and increase
quality, call your nearest Authorized Senco Dealer or
Distributor listed in the Yellow Pages under “Staples,” or
call our toll-free Action Line: 1-800-543-4596.
©1996 by Senco Products, Inc. Order MK313 (7.5AMP1096) Litho in U.S.A. Safety First. The only way to work.
trigger. After each nail or staple is driven,
completely release the trigger and lift the
tool off the work surface.
“Dual Action” activated tools are used for
applications where high-production work is
desired. There are two modes of operation:
Bottom Fire Method: This method of
operation is sometimes called bounce
.092
.092
firing. You must keep the trigger pulled
while moving the tool along the work
surface with a bouncing motion, depressing
the safety element where you want to drive
a nail or staple.
Trigger Fire Method: First depress the
safety element where you want to drive a
nail or staple and then pull the trigger.
For instructions on safe use of tools with
either of these activating mechanisms,
please refer to the Operating Instructions or
Customer Satisfaction and Safety
Reminder contained in your tool carton.
R
Loading...