SENA TECHNOLOGIES SP61 User Manual

WiFi Docking Station Manual
1. Introduction
30K WiFi Cradle is a device for 30K that charges and provides auto firmware upgrade.
30 WiFi Cradle can automatically connect to the router through the mobile app, automatically download the latest firmware available for 30K, and can always upgrade to the latest firmware through comparing firmware version when the user plugs 30K into the USB port to charge.
Supports WiFi related IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Smartphone App for iPhone and Android
3. Contents
- Wifi Docking Station
- USB Cable
- DC Charger : Input – 100-240V~50//60Hz Max 0.3A, Output - 5V/1A
- Plug : UL/EU/UK/AU Types
4. Product description
5. Getting started
a. Power On:
Insert the USB port into the charger and insert the Micro USB Port into the “USB power
port”
b. Connecting to WiFi
1. Open the mobile app
2. Connect to WiFi Docking
3. Setting WiFi Docking Station configuration
4. Select the WiFi router to connect to.
5. Enter the password of the selected WiFi router and click “Connect”
6. 30K WiFi Cradle is connecting to the router.
DECLARATION OF CONFORMITY Hereby, Sena Technologies, Inc. declares that this Sena Technologies, Inc. product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be found at Website: (公司网址) Testing standards:
EN 60950-1:2006 + A11:2009 + A1:2010+A12:2011+A2:2013 EN 62311:2008 (Draft) EN 301 489-1 V2.2.0 (2017-03) (Draft) EN 301 489-17 V3.2.0 (2017-03) EN 300 328 V2.1.1 (2016-11) EN 55032:2015 EN 55024:2010+A1:2015 EN 61000-3-2:2014 EN 61000-3-3:2013
Manufacturer's Name: Sena Technologies, Inc. Product Name: WiFi Cable Model number: SP61 Operating Temperature: (产品工作温度范围)
1. The device complies with RF specifications when the device is used at 20cm from your body.
2. The product shall only be connected to a USB interface of version USB2.0.
3. Adapter shall be installed near the equipment and shall be easily accessible. 5This product can be used across all EU member states. Care for the environment! Must not be discarded with household waste!
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be
installed and operated with minimum distance between 20cm the radiator your body: Use
only the supplied antenna. FCC IDS7A-SP61
IC Warning
- English:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
- French:
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. IC:8154A-SP61
Loading...