SENA TECHNOLOGIES SP52 User Manual

Manual

Charging

R

ed LED: Charging

Blue LED: Fully charged

Power On/Off

(+) Button

+ Center Button for 1 sec

Volume Adjustment

(+) Button - Increase the volume

(-) Button - Decrease the volume

Battery Check

Phone, Music Pairing

1.

Press the Center Button for 10 second

2.

Press the (+) Button to enter into Phone Pa

3

. Search for Bluetooth devices on your mobile phone. Select the SF4 in the list of the device

etected on the mobile phone

d

Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.

4.

Music Operation

Play or

Track back: Press the (-) Button for 1 second.

Track forward: Press the (+) Button for 1 second.

pause music: Press the Center Button for 1 second.

.

s.

iring

Mobile Phone Call Making and Answering

Ans

wering a call: Tap the Center Button

Ending a call: Press the Center Button for 2 seconds.

Voice dial: Press the Center Button for 3 seconds.

Speed dial: Press the (+) Button for 3 seconds.

Rejecting a call: Press the Center Button for 2 seconds.

s

Intercom Pairing

1.

Press and hold the Center Button of two headsets for 5 seconds until red LEDs of both units sta

to

flash rapidly.

Simply tap the Center Button of any one of the two headsets.

2.

Intercom Start/End

1st Frie

2nd Friend: Tap the Center Button twice.

3rd Friend: Tap the Center Button triple times

nd: Tap the Center Button once.

Radio On/Off

on the FM radio: Press the (-) Button for 1 second.

Turn

Turn off the FM radio: Press the (-) Button for 1 second.

Radio Scan Up FM Band

Star

t scanning: Press (+) Button for 1 second.

Stop scanning: Press (+) Button for 1 second.

rt

Save presets while scanning

Save presets: Tap the Center Button

Radio Move to Preset Station

Mov

e to next preset: Press the Center Button for 1 second (1 → 2 → … → 10)

Radio Seek Stations

See

k up stations: Double tap the (+) Button.

Seek down stations: Double tap the (-) Button.

Setting

Configuration Menu: Press the Center Button for 10 seconds.

Using th

Connect the headset to your computer via a USB cable. Launch the Sena Device Manager and click

DEVICE SETTING to configure the headset settings.

For details about downloading the Sena Device Manager, please refer to the leaflet included in the

package.

Using the Sena SF Utility App

e Sena Device Manager

On your smartphone, download the Sena SF Utility App for Android or iPhone from Google Play

1.

or App Store. Please refer to Sena.com/SF-app for more de

Pair your smartphone with the head

2.

Run the Sena SF Utility App. Swipe the screen to the right and tap Setting to configure th

3.

headset settings.

set.

tails.

e

Troubleshooting

Factory Reset

If you want to restore the SF4 to factory default settings, use the Factory Reset in the configuration menu.

The headset automatically res

Fault Reset

If the SF4 is not working properly for any reason, reset by gently pushing the pin-hole reset button on the

back of the main unit.

tores the default settings and turns off.

Safety Precautions

Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk

and/or damage to property.

Product Storage and Management

• Keep the product free of dust. It may damage mechanical and electronic parts of the product.

• Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the

battery, and/or melt plastic parts of the product.

• Excessive heat (e.g. exhaust heat) can cause damage to the decoration, the inner shell of the helmet and the

interior lining.

• Do not store the product in cold temperatures. Abrupt changes in temperatures may cause condensation and

damage electronic circuits.

• Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents as this may damage the

product.

• Direct contact with motor fuel, thinners or solvents can destroy the structure of the inner and outer shell. Make sure

the helmet does not come into contact with such substances, even for cleaning purposes.

• Do not paint the product. Paint may obstruct moving parts or interfere with the normal operation of the product.

• Do not drop or otherwise shock the product. It may damage the product or its internal electronic circuits.

• Do not disassemble, repair or modify the product as this may damage the product and invalidate the product

warranty.

• Do not store the product in humid environments, especially for long time storage.

• The helmet should be replaced after 5 to 7 years, depending on use and care. Although the outer shell is in principle

capable of a longer service life, the occurrence of material fatigue and wear to other components, as well as the

overall action of the helmet and the unknown conditions in which the helmet has been used, make it advisable for

your own safety to replace the helmet after this period of use.

• Original components (in particular on the outer shell, inner shell and restraint system) should not be altered or

removed. The fitting of additional parts from other manufacturers that have not been recommended can reduce the

protective effect and renders the DOT certification and all warranty and insurance claims invalid.

• Use only original parts, replacement parts and accessories that Sena has expressly approved for your helmet.

Product Use

• Motorcycling is associated with particular risks and dangers for the rider and passenger. These risks and dangers

can be reduced, but not eliminated completely, by wearing a helmet. It is impossible to state precisely what the

protective effect of a helmet will be in the event of an accident. Safe riding techniques, adapted to the particular road

and weather conditions, are essential for your safety.

• To provide adequate protection, the helmet must fit well and be securely fastened.

• Always fasten the chinstrap before setting off and check that the fastening system and strap are correctly in

position.

• Never ride with the chinstrap unfastened or incorrectly adjusted. The chinstrap must be correctly

positioned and must not come loose when pulled. The fastener is not correctly closed if the chinstrap becomes loose

when pulled.

• The full protective function of a helmet can no longer be guaranteed after an accident or impact. Like the crumple

zone of a car, the impact energy of a collision is absorbed by complete or partial destruction of the structure of the

outer and/or inner shell of the helmet. Because of the way helmets are designed, this damage is rarely visible from

the outside. The safety helmet is designed to absorb only one impact. It is therefore essential to replace the helmet

after a fall, accident or other violent impact. For safety reasons, the old helmet should be rendered unusable.

• The helmet safety mechanism described above can also cause small cracks in the shell when the helmet is dropped

from a small height (less than 1 meter).

• Any helmet that has been subjected to a violent impact should be replaced.

• No helmet provides absolute protection from all conceivable impacts. This helmet has been specially developed for

motorcycle riding and is unsuitable for other purposes.

• Examine the helmet for damage at regular intervals. Small scratches will not impair the protective function of your

helmet.

• In some regions, it is prohibited by law to ride motorcycles while wearing headsets. Therefore be

certain to comply with all relevant laws in the region before using the product.

• Use of the product at a high volume for a long period of time may damage your eardrums or hearing ability. Keep

the volume at a modest level to prevent damage.

• Do not cause impact to the product or touch it with sharp tools as this may damage the product.

• Do not use the product in high-temperatures or apply heat to the product as this may cause damage, explosion, or

fire.

• Keep product away from pets or small children. It may damage the product.

• In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the power and

refrain from using the product. In a place where wireless communication is prohibited, electromagnetic waves may

cause hazards or accidents.

• Do not use the product near hazardous explosives. When it is near any explosion hazards, turn off the power and

heed any regulations, instructions, and signs in the area.

Battery

This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make sure to

adhere to the following:

• Never separate the battery from the product as this may damage the product.

• The battery performance may be reduced over time with usage.

• In recharging the battery, make sure to use an approved charger provided by the manufacturer. Use of a non-

approved charger may cause fire, explosion, leakage, and other hazards may also reduce the life time or

performance of the battery.

• Any 3rd party USB charger can be used with Sena products if the charger is approved by either the FCC, CE, IC or

other locally approved agencies that Sena accepts.

• Store the battery at temperatures of 15°C~25°C (59°F~77°F). Higher or lower temperatures may

reduce the capacity and life of the battery, or may cause temporary non-operation. Do not use the

product in sub-zero temperature, because it may cause serious reduction of the battery performance.

• If you apply heat to the battery or throw it into a fire, it may explode.

• Do not use the product with a damaged battery. It may explode and/ or cause accidents.