SENA TECHNOLOGIES SP19 User Manual

| SC-HR-01

Handlebar Remote

SENA www.sena.com User’s Guide

1

| SC-HR-01

© 1998-2015 Sena Technologies, Inc. All rights reserved.
Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior
notice.

Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. 20S™, SMH10™, SMH5™,
SMH5-FM™, SPH10™, SPH10H™, SPH10H-FM™, SMH10R™, SPH10S™, SPH10H™, SR10™, SM10™, EXPAND™, Bluetooth
Pack for GoPro® are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express
permission of Sena.

GoPro® is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies, Inc. (“Sena”) is not affiliated with
Woodman Labs. The Sena Bluetooth Pack for GoPro® is an after-market accessory specially designed and manufactured by Sena
Technologies, Inc. for the GoPro® Hero3 allowing for Bluetooth capabilities.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license.
iPhone, iPod touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the
trademark or registered trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their
respective owners.

2

| SC-HR-01

1 INTRODUCTION

Thank you for choosing the Sena Handlebar Remote, remote control for Sena motorcycle bluetooth headsets. With the
Handlebar Remote, you can control your headset without getting your hand off of your handlebar. The Handlebar Remote
is compliant with Bluetooth 4.0 Sena headsets. Check www.sena.com

Hereby, SENA TECHNOLOGIES.Inc Declares that this SC-HR-01 is in compliance with the essential requirements and other relevant
provisions of directive 1999/5/EC.

for more information.

2 PACKAGE CONTENTS

Handlebar Remote Unit

3

3 INSTALLING THE HANDLEBAR REMOTE

1. Stretch the opposite ends of the Handlebar Remote

| SC-HR-01

2. Clip it on the motorcycle handlebar like the picture below.

4 GETTING STARTED

4

| SC-HR-01

4.1 Charging

You can charge the Handlebar Remote by connecting the supplied USB power & data cable into a computer’s USB port
or USB wall charger. You can use any standard micro-USB cable to charge the Handlebar Remote. The LED turns red
while the headset is charging and turns blue when it is fully charged. It takes about 2.5 hours to be fully charged.

4.2 Powering On and Off

Press the Function Button to turn on the Handlebar Remote. Press the Phone Button and the Function Button
simultaneously to turn off the device.

4.3 Buttons Matching - with Jog Dial Headsets

Handlebar Remote Jog Dial Headset

Tap Joystick Tap Jog Dial

Push Joystick Up and Down Rotate Jog Dial

Push Joystick Left and Right Rotate Jog Dial while Pressing

Tap Phone Button Tap Phone Button

Tap Ambient Mode Button (20S Only)

Tap Function Button

Tap Camera Button (10C Only)

5

| SC-HR-01

5 PAIRING WITH YOUR HEADSET

Before using the Handlebar Remote with any other Sena headsets for the first time, you will need to pair them together.
The pairing operation is required only once for each Bluetooth device. The device remains paired with the headsets and
automatically reconnects to them when they are within range.

1. Turn on the Handlebar Remote and press and hold the Function Button for 5 seconds.

2. Place the headset into intercom pairing mode. Please refer to the headset’s manual for details.

3. Tap the Jog Dial or the Center Button of the headset, and wait until the headset’s LED turns blue.

Note:
The Handlebar Remote is compliant only with Bluetooth 4.0 Sena Headsets.

6

| SC-HR-01

6 REMOTE CONTROL FUNCTIONS

6.1 Mobile Phone Call Making and Answering

Please have your headset Bluetooth paired to a phone before using the mobile phone functions with the Handlebar
Remote.

1. When you have an incoming call, simply tap the Phone Button or the Joystick to answer the call.

2. To end a call, tap the Phone Button or press the Joystick for 2 seconds until you hear a beep, or wait for the called
person to end the call.

3. To reject a call, press the Joystick for 2 seconds until you hear a beep while the phone is ringing.

4. To transfer a call between the mobile phone and the headset during the phone conversation, press the Phone Button
for 2 seconds until you hear a beep.

5. Double tap the Phone Button to enter into speed dials.

6.2 Bluetooth Stereo Music

Please have your headset Bluetooth paired to a media device before using the Bluetooth stereo music functions with the
Handlebar Remote.

1. To play or pause music, press and hold the Joystick for 1 second until you hear a double beep.

2. To adjust volume, push the Joystick up or down.

3. To track forward or track back, push the Joystick left or right.

6.3 Intercom

You can start an intercom conversation with one of any intercom friends by tapping the Joystick: single tap to intercom
with the first intercom friend, double tap to intercom with the second intercom friend, and triple tap to intercom with the
third intercom friend. To terminate an intercom conversation, single tap the Joystick. Any intercom connection with any
intercom friend will be terminated by a single tap. A double or triple tap will do nothing in this case.

6.4 FM Radio

To turn on the FM radio, press and hold the Phone Button for 2 seconds until you hear a mid-toned double beep sound.
To turn off the FM radio, press and hold the Phone Button for 2 seconds.

1. You can listen to preset stations while listening to the FM radio. Tap the Phone Button once to go upward to your next
saved preset station.

2. Push the Joystick right or left to seek station frequencies up or down.

3. Double tap the Phone Button to scan up the radio frequencies. Tap the Phone Button if you want to save the station.

4. Press and hold the Joystick for 2 seconds to enter into preset mode. Push the Joystick up or down to seek through the
presets. Tap the Joystick if you want to save the preset. Tap the Phone Button if you want to delete the preset.

6.5 Configuration Menu

Press and hold the Joystick for about 10 seconds to enter into configuration setting mode.

7