Sena BS, 3S User Manual

Page 1
3S
Bluetooth® Headset & Intercom
for Scooters and Motorcycles
User's Guide
www.sena.com
Page 2
3S
CONTENTS
1. INTRODUCTION .................................................................................3
2. PACKAGE CONTENTS ........................................................................4
3. GETTING STARTED .............................................................................5
Installing the 3S on Your Helmet .................................................................. 5
Powering On ................................................................................................. 6
Powering Off ................................................................................................. 6
Charging the 3S ........................................................................................... 6
Checking Battery Level ................................................................................ 7
Adjusting the Volume Level ..........................................................................8
Function Priority ............................................................................................ 8
Fault Reset .................................................................................................... 8
4. OPERATION QUICK REFERENCE ......................................................9
5. PAIRING AND USING THE 3S WITH BLUETOOTH DEVICES ..........11
Mobile Phone Pairing ................................................................................. 11
Multipoint Mobile Phones Pairing ............................................................... 11
Bluetooth Stereo Device Pairing .................................................................12
Bluetooth GPS Navigation Pairing .............................................................. 12
Mobile Phone Call Making and Answering ................................................ 15
Stereo Music ...............................................................................................15
6. INTERCOM CONVERSATION ...........................................................16
Pairing with Other 3S Headsets for Intercom Conversation ....................... 16
Starting and Ending Intercom Conversation .............................................. 16
Intercom and Mobile Phone Call ................................................................ 16
Intercom Failure .......................................................................................... 17
Intercom Reconnection .............................................................................. 17
7. 3S CONFIGURATION SETTING ........................................................17
Enabling/Disabling Voice Activated Phone Answering ..............................18
Enabling/Disabling Voice Prompts .............................................................18
Delete All Bluetooth Pairing Information ..................................................... 18
Reset to Factory Default Setting ................................................................. 19
Exit Voice Conguration Menu ...................................................................19
8. FIRMWARE UPGRADE ......................................................................20
BATTERY INFORMATION
.........................................................................20
MAINTENANCE AND CARE
......................................................................21
DISPOSAL..................................................................................................21
CERTIFICATION AND SAFETY APPROVALS
..........................................22
FCC Compliance Statement ....................................................................... 22
FCC RF Exposure Statement ......................................................................22
FCC Caution ............................................................................................... 22
CE Declaration of Conformity ..................................................................... 22
Industry Canada Statement ....................................................................... 23
Bluetooth License ....................................................................................... 23
WAIVER AND GENERAL RELEASE .........................................................23
Two-year Limited Warranty ......................................................................... 25
Limitation of Liability ................................................................................... 25
Return for Full Refund ................................................................................ 26
WARNING ..................................................................................................26
Page 3
3S
3
English
1. INTRODUCTION
Thank you for choosing the Sena 3S, Bluetooth Headset and Intercom for Scooters and Motorcycles. With the 3S, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or GPS navigation voice instructions via Bluetooth, and have intercom conversations in full duplex with a passenger or other riders.
The 3S is compliant with the Bluetooth specication 3.0 supporting the following proles: Headset Prole, Hands-Free Prole (HFP), Advanced Audio Distribution Prole (A2DP), and Audio Video Remote Control Prole (AVRCP). Please conrm compatibility with other devices with the
manufacturers.
Please read this user guide carefully before using the headset. Also visit www.sena.com for the latest version of the user guide and for additional information related to Sena Bluetooth products.
The 3S includes the following features:
Bluetooth handsfree for Bluetooth mobile phones
Bluetooth stereo headset for Bluetooth stereo devices such as MP3
players
Bluetooth stereo headset for Bluetooth GPS navigations
• Bluetooth intercom up to 200 meters (220 yards)*
Easy two-button operation
Installation friendly unibody design
Firmware upgradeable
Key Specications:
• Bluetooth 3.0
• Supporting proles: Headset Prole, Hands-Free Prole (HFP),
Advanced Audio Distribution Prole (A2DP), Audio Video Remote Control Prole (AVRCP)
* in open terrain
Page 4
3S
4
2. PACKAGE CONTENTS
Status LED
Speakers
Microphone
(-) Button (Intercom Button)
(+) Button (Phone Button)
Pin-hole Reset Button
DC Power Charging & Firmware Upgrade Port
3S Headset
USB Power & Data Cable
Microphone Sponges
Velcro Pads
for Speakers
Page 5
3S
5
English
3. GETTING STARTED
Installing the 3S on Your Helmet
1. Place the speaker-microphone unit in the helmet along with the velcro pads, centered to your ear, in the ear pockets of the helmet. Locate the boom microphone as closely as possible to your mouth when wearing the helmet.
2. Hide the wire under the helmet padding after the installation.
1
2
Page 6
3S
6
3
4
Powering On
Press and hold the (+) Button and the (-) Button at the same time for 1
second to power on. The blue LED turns on and you will hear ascending beeps and “Hello”.
Powering Off
Press the (+) Button and the (-) Button at the same time. The red LED
turns on for about 2 seconds until it turns off completely and you will hear “Goodbye” and descending beeps.
Charging the 3S
You can charge the 3S by connecting the supplied USB power & data cable into a computer USB port or USB wall charger. You can use any standard micro-USB cable to charge the 3S. The LED turns red while charging, and turns blue when the headset is fully charged. It takes about 2.5 hours to fully charge.
Page 7
3S
7
English
Checking Battery Level
You can check the battery level in two different ways when the headset is powering on.
LED Indicator
When the headset is powering on, the red LED ashes rapidly indicating
the battery level.
LED Status
4 ashes High, 70~100%
3 ashes Medium, 30~70%
2 ashes Low, 0~30%
Voice Prompt Indicator
When you power on the headset, keep pressing and holding the (+) Button and (-) Button simultaneously for about 3 seconds until you hear
three high tone beeps. Then you will hear a voice prompt indicating the battery level. However, if you release the buttons as soon as the headset turns on, you will not hear the voice prompt for the battery level.
Note:
1. The USB power & data cable is also used for firmware upgrade of the 3S.
2. The USB wall charger is not included in the package. Any 3rd party USB charger can be used with Sena products if the charger is approved by either FCC, CE, IC, or other locally approved agencies that Sena accepts. Please contact Sena regarding locally approved agencies Sena accepts.
Page 8
3S
8
Low Battery Warning
When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear mid-tone triple beeps and a voice prompt saying “Low battery”.
Adjusting the Volume Level
You can easily adjust the volume by pressing the (+) Button or the (-)
Button. You will hear a beep when the volume reaches maximum or minimum level. The volume is set and maintained independently at different levels for each audio source even when you turn off and on the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume when you hear Bluetooth MP3 music. So you can always maintain the preferred optimum volume level for each audio source.
Function Priority
The 3S operates in the following order of priority:
(Highest)
Mobile Phone Intercom (Lowest) Bluetooth Stereo Music
A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by an intercom call, and intercom conversation is interrupted by an incoming mobile phone call.
Fault Reset
When the 3S is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button on the left speaker unit. Insert a paper clip into the reset pin-hole and press and hold the reset button for a second with light pressure. The 3S will be switched off after which time, you have to turn the system back on and try again. However, this will not restore the headset to factory default settings.
Page 9
3S
9
English
4. OPERATION QUICK REFERENCE
Function
Operations
Power On/Off
1 sec. 1 sec.
+
Power On
1 press 1 press
+
Power Off
Volume
Adjustment
1 press 1 press
or
Intercom
Pairing
pairing
A
B
1)
5 sec. 5 sec.
2)
1 sec.
Function
Operations
Bluetooth
Pairing
(Phone, MP3,
GPS)
1)
Sena 3S
Sena 3S v1.1
5 sec.
2)
Sena 3S
Sena 3S v1.1
Select
3)
Sena 3S
Sena 3S v1.1
Enter PIN
Start & End
Intercom
Conversation
1 sec.
Conguration
10 sec.
Page 10
3S
10
Function
Operations
Mobile Phone
Answer
or
1 press
End
2 sec.
Voice
Command
*
3 sec.
*
3 sec.
Reject
2 sec.
Function
Operations
Music
1 sec.
2 sec.
2 sec.
*
You can use “Voice Command” and “Redial” only in stand-by mode.
Page 11
3S
11
English
5. PAIRING AND USING THE 3S WITH BLUETOOTH DEVICES
Mobile Phone Pairing
1 Turn on the 3S and press and hold the (+) Button for 5 seconds until
the LED ashes red and blue alternately and you hear multiple beeps.
You will hear a voice prompt saying “Phone pairing”.
2. Search for Bluetooth devices on your mobile phone. Select the Sena 3S in the list of the devices detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
4. The mobile phone conrms that pairing has completed and the 3S is
ready to use. You will hear a voice prompt from the 3S saying “Your headset is paired”.
5. If the pairing process is not completed within three minutes, the 3S will return to stand-by mode.
Multipoint Mobile Phones Pairing
You can simultaneously use two mobile phones which use the mobile
phone prole.
1. You can pair the rst mobile phone to the 3S by following the simple
procedures in “Mobile Phone Pairing”.
2. To pair the second mobile phone, press and hold the (-) Button for 5 seconds until the red LED is rapidly ashing and you hear multiple
beeps.
3. Within 2 seconds, press and hold the (+) Button for 1 second, then the LED turns to blue ashing and the beeps turn to high tone double
beeps. You will hear a voice prompt saying “Multipoint pairing”.
4. Search for Bluetooth devices on your mobile phone. Select the Sena 3S in the list of the devices detected on the mobile phone.
5. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
6. The mobile phone conrms that pairing has completed and the 3S is
ready to use. You will hear a voice prompt from the 3S saying “Your headset is paired”.
Page 12
3S
12
3S
1st Mobile Phone 2nd Mobile Phone
Mobile Phone Pairing
HFP
+
A2DP
HFP
Multipoint Pairing
Multipoint Mobile Phones Pairing
Bluetooth Stereo Device Pairing
1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the 3S with it separately. When the 3S is paired with the mobile phone, it is also paired as a stereo music device.
2. If you have a stand alone Bluetooth stereo device, follow the pairing procedure separately. The procedure is the same as the procedure of “Mobile Phone Pairing”.
Note:
1.
If Bluetooth connection between the headset and a mobile phone is disconnected, press and hold the (+) Button for 3 seconds to recover the Bluetooth connection immediately.
2. If Bluetooth connection between the headset and a media player is disconnected, press and hold the (+) Button for 1 second to recover the Bluetooth connection and play.
Bluetooth GPS Navigation Pairing
You can listen to voice instruction from Bluetooth GPS navigation. Some
GPS systems use mobile phone prole (HFP, Hands-Free Prole) and others use stereo music prole (A2DP, Advanced Audio Distribution Prole). Most motorcycle specic GPS systems use mobile phone prole for turn-by-turn voice instruction. You can simultaneously use a mobile phone and a GPS which uses mobile phone prole by one of the
following procedures.
Page 13
3S
13
English
Multipoint GPS Pairing
If you use GPS only for turn-by-turn voice instructions, not for Bluetooth stereo music streaming, multipoint pairing is recommended for the GPS connection. Multipoint Bluetooth pairing allows the 3S to connect two
HFP devices at the same time: mobile phone and GPS navigation. Follow
the steps below to pair the GPS using the multipoint pairing.
1. Turn on the headset and press and hold the (-) Button for 5 seconds until the red LED is rapidly ashing and you hear multiple beeps.
2. Within 2 seconds, press and hold the (+) Button for 1 second, then the LED turns to blue ashing and the beeps turn to high tone double
beeps. You will hear a voice prompt saying “Multipoint pairing”.
3. Search for Bluetooth devices on the GPS navigation screen. Select the Sena 3S in the list of the devices detected on the GPS.
4. Enter 0000 for the PIN.
5. The GPS conrms that pairing has completed and the 3S is ready to
use. You will hear a voice prompt from the 3S saying “Your headset is paired”.
6. If the pairing process is not completed within three minutes, the 3S will return to stand-by mode.
The pairing diagram for multipoint GPS pairing is shown in the gure
below.
GPS Navigation
3S
Mobile Phone
Mobile Phone Pairing
HFP
+
A2DP
HFP
Multipoint Pairing
Multipoint GPS Pairing
Page 14
3S
14
GPS Pairing as Mobile Phone
If GPS is not only used for turn-by-turn voice instructions but also is your preferred Bluetooth stereo music source, you can pair the GPS to the 3S by following the simple procedures in “Mobile Phone Pairing”. When you do this, the 3S thinks the GPS is a mobile phone. But the 3S can directly pair an additional mobile phone.
Note: You have to use a motorcycle specific GPS which transmits turn-by-turn voice instruction to the headset by Bluetooth. Most automotive GPS systems don’t have this feature.
GPS Navigation
Mobile Phone
3S
HFP
HFP
+
A2DP
Multipoint Pairing
Mobile Phone Pairing
GPS Pairing as Mobile Phone
Page 15
3S
15
English
Mobile Phone Call Making and Answering
1.
When you have an incoming call, simply press the (+) Button to answer
the call.
2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering, VOX phone
is
enabled. (Refer to “Enabling/Disabling Voice Activated Phone Answering” for details.)
3. To end a call, press and hold the (+) Button for 2 seconds until you
hear a mid-tone single beep, or wait for the called person to end the call.
4. To reject a call, press and hold the (-) Button for 2 seconds until you
hear a beep while the phone is ringing.
5. There are several ways to make a phone call:
Enter numbers on your mobile phone keypad and make a call.
Then the call is automatically transferred to the headset.
• Press and hold the (+) Button for 3 seconds in stand-by mode
until you hear a high tone single beep to activate the voice dialing of your mobile phone. For this, the voice dialing feature must be available on the mobile phone. Refer to your mobile phone manual for further instruction.
• To redial the last number, press and hold the (-) Button for 3
seconds in stand-by mode until you hear a high tone single beep. You will hear a voice prompt saying “Last number redial”.
Note:
1.
If you are using multipoint mobile phone connection and you have an incoming call from the second phone during the call of the first phone, then you may still receive the call from second phone. In this case, the call from the first phone is on waiting mode. If you end a call, then it will automatically guide you to the first phone call.
2. If you are using multipoint connection of mobile phone and GPS, you may not listen to the GPS voice instruction during the phone call.
Stereo Music
You can listen to stereo music by Bluetooth wireless stereo. The Bluetooth audio device must be paired with the 3S by following the
“Bluetooth Stereo
Device Pairing” instructions. The 3S
supports the Audio/Video Remote
Control Prole (AVRCP), so if your Bluetooth audio device also supports
the AVRCP, you can use the 3S to remotely control music playback. So, you can not only adjust the volume but also use the functions such as play, pause, track forward and track backward.
• To adjust the volume, press the (+) Button or the (-) Button.
• To play or pause music, press and hold the (+) Button for 1 second
until you hear a double beep.
• To track forward or track back, press and hold the (+) Button or the (-)
Button for 2 seconds until you hear a double beep.
Page 16
3S
16
6. INTERCOM CONVERSATION
Pairing with Other 3S Headsets for Intercom Conversation
The 3S can be paired with another headset for Bluetooth intercom conversation.
1. Turn on the two 3S headsets (A and B) that you would like to pair with
each other.
2. Press and hold the (-) Button of the headset A and B for 5 seconds until the red LEDs of both units start to ash rapidly. You will hear a
voice prompt saying “Intercom pairing”.
3. Simply press the (-) Button of either of the two headsets A or B (It doesn’t matter that you choose A or B) and wait until the LEDs of
both headsets turn to blue and intercom connection is automatically established. The two 3S headsets A and B are paired with each other for intercom conversation. If the pairing process is not completed within one minute, the 3S will return to stand-by mode.
Starting and Ending Intercom Conversation
1. You can start an intercom conversation with your intercom friend by
pressing and holding the (-) Button for 1 second.
2. To terminate an intercom conversation, press and hold the (-) Button
for 1 second again.
Intercom and Mobile Phone Call
1. When you have an incoming mobile phone call during an intercom
conversation, you will hear a ring tone. You can choose whether to 1)
answer the mobile phone call and stop the intercom conversation, or
2) reject the phone call and stay on the intercom conversation.
To answer the phone call and stop the intercom conversation, press the (+) Button. When you hang up the phone call, the intercom will
automatically be recovered.
To reject the phone call and stay on the intercom conversation, press and hold the (-) Button for 2 seconds until you hear a beep.
Unlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation by an incoming mobile call.
2. When you have an incoming intercom call during a mobile phone call, you will hear 4 high tone beeps, alerting you that there is an incoming
Page 17
3S
17
English
intercom call. You will also hear a voice prompt saying “Intercom requested”. In this case, the intercom call does not override the
mobile phone call because intercom has lower priority than mobile call. You have to hang up the mobile phone call to make or receive an intercom call.
Intercom Failure
When you try to start an intercom conversation with an intercom friend who is already having a mobile phone call with another person, you will hear a low tone double beep signifying a busy signal. You will also hear a voice prompt saying “Intercom failed, try again later”. In this case, you have to try again later. On the other hand, the intercom friend will hear 4 high tone beeps alerting them that there is an incoming intercom call.
Intercom Reconnection
If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected. In this case, the 3S automatically tries to reconnect the intercom every 8 seconds. You will hear high tone double beeps until the intercom is reestablished. If you don’t want to make a reconnection,
press and hold the (-) Button for 1 second to stop the attempt.
7. 3S CONFIGURATION SETTING
You can set the conguration of the 3S by the voice menu instruction as
below.
1. To enter into voice conguration menu, press and hold the (+) Button for 10 seconds until the LED shows solid blue and you hear high tone
double beeps. You will hear a voice prompt saying “Conguration menu”.
2. Press the (+) Button to navigate between menus. You will hear voice
prompts for each menu items as below.
3. You can enable or disable the feature or execute the command by
pressing the (-) Button.
4. If any button is not pressed within 10 seconds, the 3S will exit the conguration and goes back to standby.
5. If you want to exit the conguration immediately, press and hold the (+) Button until you hear a voice prompt, “Exit conguration”, and press the (-) Button.
Page 18
3S
18
The voice prompts for each menu item are as below:
(1) VOX phone (2) Voice prompt (3) Delete all pairings (4) Factory reset
(5) Exit conguration
Enabling/Disabling Voice Activated Phone Answering
Voice Prompt “VOX phone”
Factory Default
Enable
Enable / Disable
Press the (-) Button
If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough, unless you are connected to intercom. For example, when you hear a series of beeps for an incoming call, you can answer the phone by saying “Hello” or any other word loudly. However, the phone VOX feature does not work if you are connected to intercom. This is enabled from the factory but you can disable this. If this mode is
disabled, you have to press the (+) Button to answer an incoming call.
Enabling/Disabling Voice Prompts
Voice Prompt “Voice prompt”
Factory Default
Enable
Enable / Disable
Press the (-) Button
You can disable voice prompts by conguration setting, but the following
voice prompts are always on.
- Voice prompts for conguration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
Delete All Bluetooth Pairing Information
Voice Prompt “Delete all pairings”
Factory Default
N/A
Execute
Press the (-) Button
To delete all Bluetooth pairing information of the 3S, press and hold
the (+) Button until you hear a voice prompt, “Delete all pairings”, and press the (-) Button to conrm.
Page 19
3S
19
English
Reset to Factory Default Setting
Voice Prompt “Factory reset”
Factory Default
N/A
Execute
Press the (-) Button
To restore factory default settings on the 3S, press and hold the (+) Button until you hear a voice prompt, “Factory reset”. Press the (-) Button to conrm. The 3S powers off with a voice prompt, “Headset
reset, goodbye”.
Exit Voice Conguration Menu
Voice Prompt “Exit conguration”
Factory Default
N/A
Execute
Press the (-) Button
To exit voice conguration menu and get back to stand-by mode, press and hold the (+) Button until you hear a voice prompt, “Exit conguration”. Press the (-) Button to conrm.
Press (+) Button Press (-) Button
“Vox phone”
Enable / disable
“Voice prompt” Enable / disable
“Delete all pairings”
Execute
“Factory reset” Execute
“Exit conguration”
Execute
Voice Conguration Menu & Button Operations
Page 20
3S
20
8. FIRMWARE UPGRADE
The 3S supports rmware upgrade function. Please visit Sena Bluetooth
web site at www.sena.com to check the latest software downloads.
BATTERY INFORMATION
The product has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved
charger may present a risk of re, explosion, leakage, or other hazard.
Always try to keep the battery between 15ºC and 25ºC (59ºF and 77ºF).
Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily. Battery
performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a re as they may explode. Batteries may
also explode if damaged. Never use any charger that is damaged. Operating times may differ depending on the devices used together, features used, battery age and condition, temperatures to which battery is exposed, and many other factors.
Page 21
3S
21
English
MAINTENANCE AND CARE
The product should be treated with care and the following suggestions will help you protect your warranty coverage.
1. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
2. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and wrap or melt certain plastics.
3. Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
4. Do not attempt to open the product.
5. Do not drop or knock the device. Rough handling can break internal
circuit boards and ne mechanics.
6. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
7. Do not paint the device. Paint can clog the moving parts and prevent proper operation.
DISPOSAL
The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and
other locations where separate collection systems are available. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please do not dispose of these
products as unsorted municipal waste, but hand it in at an ofcial
collection point for recycling.
Page 22
3S
22
CERTIFICATION AND SAFETY APPROVALS
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specic
operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi­transmitter product procedures.
FCC Caution
Any changes or modications to the equipment not expressly approved
by the party responsible for compliance could void user’s authority to operate the equipment.
CE Declaration of Conformity
This product is CE marked according to the provisions of the R&TTE
Directive (99/5/EC). Hereby, Sena declares that this product is in
compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information please consult www.sena.com. Please note that this product uses radio frequency
bands not harmonized within EU. Within the EU this product is intended
Page 23
3S
23
English
to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and
Switzerland.
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference. (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Bluetooth License
The Bluetooth
®
word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners.
The 3S is compliant with and adopts the Bluetooth
®
Specication 3.0
and has successfully passed all interoperability tests that are specied
in the Bluetooth
®
specication. However, interoperability between the
device and other Bluetooth
®
-enabled products is not guaranteed.
WAIVER AND GENERAL RELEASE
By using the product you waive all substantial legal rights including the right to sue. Please read the following carefully before using the device. If you do not accept all terms of this agreement, you should immediately return the product for a full refund. By using the headset you agree to be bound to this agreement and forfeit the right to sue. Using a communication device while riding a motorcycle, scooter, moped, ATV, quad-bike or any other vehicle or equipment, whether on land, water or
air (jointly referred to as “Vehicle”) requires your complete and undivided attention. Sena Technologies, Inc., including its Ofcers, Directors, Afliates, Parent Company, Representatives, Agents, Contractors, Sponsors, Employees, Suppliers and Resellers (jointly referred to as the “Company” or “Sena”) strongly advise you to take all necessary precautions and remain alert to the trafc, weather and road conditions
if you choose to use the product headset, including all derivative models
irrespective of its commercial name or branding (the “Device”), and
stop your Vehicle on the roadside prior to initiating or receiving calls. Any publications, advertisements, announcements or similar notes that refer to using the Device while riding a Vehicle are solely intended to address its technical capabilities and should not be misconstrued as if
encouraging users to operate the Device while actively involved in trafc.
Page 24
3S
24
By way of purchasing this Device and not returning it for a full refund
(see below), you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorney’s fees) and holding
Sena harmless for any bodily injuries, harm or death as well as losses or damages in goods, to any Vehicles including your own, or to any property or asset that belong to you or to third parties, any of which may result from using the Device under any circumstances or conditions and irrespective of jurisdiction. Sena will not be responsible for any physical damages, irrespective of reasons, conditions or circumstances, including malfunctioning of the Device, and all risks associated with operating it rest solely and entirely with the user of this Device, irrespective of whether the Device is used by the original purchaser or any third party.
Sena hereby noties you that using this Device may also be in
contravention to local, federal, state or national laws or regulations, and that any use of the Device is entirely at your sole risk and responsibility.
1. You, your heirs, legal representatives, successors or assigns, hereby
voluntarily and forever release, discharge, indemnify and hold harmless Sena from any and all litigation, claims, debts, demands, actions and liability which may arise, directly or indirectly, from using the Device for any distress, pain, suffering, discomfort, loss, injury, death, damages to or in respect to any person or property however caused, WHETHER ARISING FROM THE NEGLIGENCE OR OTHERWISE, and which may hereafter accrue to you on some future
date as a result of said use, to the fullest extent permitted by law.
2. You fully understand and assume the risks in using the Device, including risk of negligent acts or omissions by others.
3. You conrm that you are physically capable to use the Device and
that you have no medical conditions or needs that may infringe upon
your abilities to do so in a safe manner. You conrm that you are at least eighteen (18) years of age and that you have been advised of the risks associated with the use of the Device. You further conrm
that you will not consume any alcohol that may affect your alertness or any mind-altering substance, and will not carry, use or consume these substances before or during the use of the Device.
4. You fully acknowledge our warnings and understand that: (a) risks and dangers exist in using the Device while in trafc, including but
not limited to injury or illness, strains, fractures, partial and/or total paralysis, death or other ailments that could cause serious disability;
(b) these risks and dangers may be caused by the negligence of the
manufacturers or its agents or any third party involved in designing
or manufacturing the Device; (c) these risks and dangers may arise
from foreseeable or unforeseeable causes. You hereby assume all risks and dangers and all responsibility for any losses and/or damages, whether caused in whole or in part by the negligence or other conduct of others, including the Company.
5. You conrm that you have read this release of liability and fully
Page 25
3S
25
English
understand its terms and that you have given up substantial rights
by not returning the Device for a full refund (see refund option below).
Two-year Limited Warranty
Sena Technologies, Inc. (“Sena”) warrants that this product (“Product”)
shall conform to and perform in accordance with published technical
specications and the accompanying written materials, and shall be free of defects in materials and workmanship, for a period of two (2) year from the date of purchase by the rst consumer purchaser of the Product.
The limited warranty extends only to the original consumer purchaser of the Product and is not assignable or transferable to any subsequent purchaser/end-user.
This warranty is limited to the repair and/or replacement, at Sena’s discretion, of defective or non-conforming Product, and Sena shall
not be responsible for the failure of the Product to perform specied functions, or any other non-conformance caused by or attributable to: (a) any misapplication or misuse of the Product; (b) failure of Customer to adhere to any of Sena’s specications or instructions; (c) neglect of, abuse of, or accident to, the Product; or (d) any associated or
complementary equipment or software not furnished by Sena.
Limited warranty service may be obtained by delivering the Product to Sena or to the international distributor it was purchased through and providing proof of purchase or receipt date. Customer agrees to insure
the Product or assume the risk of loss or damage in transit, to prepay shipping charges to Sena, and to use the original shipping container or equivalent.
Limitation of Liability
EXCEPT AS EXPRESSLY PROVIDED HEREIN, SENA MAKES NO WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED, WITH RESPECT TO ANY EQUIPMENT, PARTS OR SERVICES PROVIDED PURSUANT TO THIS AGREEMENT, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NEITHER SENA NOR ITS DEALER SHALL BE LIABLE FOR ANY OTHER DAMAGES, INCLUDING BUT NOT LIMITED TO DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE AND STRICT LIABILITY), SUCH AS, BUT
NOT LIMITED TO, LOSS OF ANTICIPATED PROFITS OR BENEFITS RESULTING FROM, OR ARISING OUT OF, OR IN CONNECTION WITH THE USE OF FURNISHING OF EQUIPMENT, PARTS OR SERVICES HEREUNDER OR THE PERFORMANCE, USE OR INABILITY TO USE THE SAME, EVEN IF SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL SENA OR ITS DEALERS TOTAL LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT.
Page 26
3S
26
Return for Full Refund
IF YOU ARE UNWILLING TO ACCEPT AND AGREE TO THE ABOVE CONDITIONS, YOU MAY RETURN THIS DEVICE TO SENA FOR A FULL REFUND, PROVIDED THAT YOU DO SO NO LATER THAN 14 BUSINESS DAYS FOLLOWING THE PURCHASE OF THE DEVICE AND SUBJECT TO THE WRAPPING BEING INTACT. WHEN DOING SO, PLEASE REFER TO THIS SECTION. BY NOT RETURNING THE DEVICE FOR REFUND WITHIN THE PERIOD PROVIDED, YOU ARE EXPLICITLY IN AGREEMENT WITH THE ABOVE AND RENOUNCE ALL RIGHTS TO FUTURE CLAIMS AND DEMANDS AGAINST SENA AS DEFINED ABOVE.
WARNING
Sena informs that using this device in public trafc may not be authorized by the law. Please check your local law and use this device only out of public trafc such as private properties or closed circuits. If
the simultaneous use of both ear speakers while riding a motorcycle is prohibited by your local law, please use only a single ear speaker while riding. Sena denies any liability should you choose not to respect this warning.
Using the headset with loud volume may be harmful to your eardrums and cause hearing loss. Please maintain proper volume level to protect your ears.
Page 27
www.sena.com
User's Guide for Firmware v1.0
1.0.1
Loading...