Seiko PULSAR Y911, Y911 User Manual
CAL. Y911
WITH “WHITE-ON” DISPLAY
★ “WHITE-ON” display
A newly-developed transparent liquid crystal panel called “WHITE-ON”
display is provided over the analogue dial. It shows white characters
clearly without blocking the view of the hands and dial, and various digital
displays can be turned on and off as you require. The watch, therefore,
serves as a multi-function digital watch as well as being an analogue
watch.
● Analogue time and digital calendar
● Single-time alarm
● 3-channel regular alarm
● Stopwatch with 20 lap/split memory
ENGLISH
Hour hand
Digital display turned off
Minute hand
English
2
Second
hand
A
a: Normal position : Free
b: Extended position : Time setting
B
a b
CROWN
C
Press any one
of the buttons.
CALENDAR mode
Press
(Press twice.)
STOPWATCH mode
SINGLE-TIME ALARM mode
A
(Press once.)
Press
B
A
A
C
Press
A
(Press 4 times.)
REGULAR ALARM mode
English
3
[for models with screw down crown]
Unlocking the crown
1 Turn Crown counterclockwise until you no
longer feel the threads turning.
2 Crown can be pulled out.
Locking the crown
English
1 Push Crown back in to normal position.
2 Turn Crown clockwise while pressing it lightly
until tight.
4
● Set the analogue and digital times at the same time.
CROWN
▲
▲
B
C
CROWN
CROWN
▲
▲
▲
B
A
C
✽ Selection of the digits
Minutes ➾ Hour ➾ Year ➾ Month ➾ Date
➾
Pull out when Second hand
is at the 12 o’clock position.
Select the digits to be
adjusted.✽
Set the flashing digits.
Turn to set Hour and Minute
hands to the digital time.
Push back in accordance
with a time signal.
English
5
● The alarm time can be set to ring within 24 hours of the current time.
● The alarm rings once at a designated time and is automatically disengaged thereafter.
ALARM TIME SETTING
Mode
mark
English
A
Single-time alarm mark
(indicating the alarm is engaged)
● To disengage the alarm:
and
B
6
In SINGLE-TIME ALARM mode, press at the same time.
C
Press in CALENDAR mode
B
to show SINGLE-TIME
B
C
▲
ALARM mode.
BorC
* At the designated time, the alarm rings for 20
Set the alarm time.
▲
A
Return to CALENDAR mode.
seconds. To stop it manually, press any one
of the buttons.
● Three regular alarms can be set one by one to the desired alarm times.
They can be engaged and disengaged independently of one another.
DISPLAY CHANGE IN REGULAR ALARM MODE
Press in CALENDAR mode to show REGULAR ALARM mode.
C
▲
With each press, the display changes in the following order.
A
HOURLY TIME
ALARM-1 ALARM-2➾ALARM-3
➾
➾
CALENDAR mode
ALARM TIME SETTING
In REGULAR ALARM mode, select the desired alarm display.
A
▲
SIGNAL
➾
English
7
“ON/OFF”
(Alarm engagement/
disengagement mark)
Mode mark
A
English
Regular alarm mark
(indicating any one of
three regular alarms is engaged)
✽ Selection of the digits
Alarm
engagement/
disengagement
8
➾
B
▲
▲
B
B
▲
C
▲
B
C
Alarm No.
➾ Hour ➾ Minutes ➾
*At the designated time, the alarm rings
for 20 seconds. To stop it manually,
press any one of the buttons.
Show ALARM SETTING
display.
Select the digits to be
adjusted.✽
Set the flashing digits.
Return to REGULAR ALARM
mode.
12-/24-hour
indication
➾
REGULAR
ALARM
mode
Loading...