Seiko PULSAR W650, W650, W620, W240, PULSAR W240 User Manual
CAL. W240, W620, W650
DIGITAL QUARTZ
● Time/calendar
● Stopwatch with 8 lap memory
● Countdown timer with preset and
adjustable timer functions
● Daily alarm
● Stroke function (Cal. W240, W620)
● Auto illumination function (Cal. W650)
● Electroluminescent panel
MODE CHANGE
Cal. W240, W620
Mode mark
(No mode mark in TIME/
CALENDAR mode)
Change modes
TIME/
CALENDAR
ALARM
2
➡
➡
TIMER
A
➡
STOPWATCH
➡
STROKE
➡
Cal. W650
Mode mark
Change
modes
TIME/
CALENDAR
ALARM
➡
A
➡
➡
STOPWATCH
➡
TIMER
TIME/CALENDAR MODE
TIME/CALENDAR SETTING
Press for 2 to 3 seconds.
▲
➾
B
▲
Select the digits to be adjusted.
C
▲
Set the flashing digits.
D
▲
Return to TIME/CALENDAR
B
mode.
AUTO ILLUMINATION
12-/24-hour
indication
B
C
D
Selection of the digits
Cal. W240, W620 Cal. W650
Seconds ➾ Minutes ➾ Hour ➾ Date
➾
12-/24-hour indication Year Month
➾
➾
on/off
➾ Seconds ➾ Minutes
➾
➾➾
Year Month
➾
Hour
➾
➾
Date
3
AUTO ILLUMINATION FUNCTION (only for Cal. W650)
When the function is turned on:
● The display is illuminated with each press of a button to operate the watch.
● While the stopwatch or timer is counting, the display is illuminated every
minute to signal the lapse of time: For the first 19 minutes in the stopwatch
function and for the last 19 minutes in the timer function.
Press for 2 to 3 seconds.
B
▲
Turn on/off the AUTO
D
ILLUMINATION FUNCTION.
▲
Return to TIME/CALENDAR mode.
B
4
The function
is on.
Current time
Time measured
STOPWATCH MODE
B
Start / Stop / Restart
C
Reset /
Measure lap time
D
Lap time measurement
C
START
▲
D
LAP
▲
▲
D
LAP
▲
C
STOP
D
RESET
5
MEMORY RECALL FUNCTION
● The stored data can be recalled either during or after the measurement.
Press to activate the memory
B
▲
recall function.
B
6
With each press, stored data
D
are recalled from the oldest to
▲
the newest.
Return to STOPWATCH mode.
B
**In memory recall after measurement,
D
the oldest data in memory is displayed.
In memory recall during measurement,
the newest one is displayed.
**
Loading...