Seiko 8V36 User Manual

Page 1
You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 8V36. For best results, please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz Watch. Please keep this manual handy for ready reference.
Usted es ahora un honrado poseedor del reloj SEIKO analógico de cuarzo Cal. 8V36. Para obtener de él los mejores resultados, lea las instrucciones del presente folleto con cuidado antes del uso de su reloj SEIKO analógico de cuarzo. Guarde este manual para fácil referencia.
Page 2
English
ENGLISH
TIME SETTING ......................................................................................................... 4
ULTRASONIC ALARM ............................................................................................. 5
NOTES ON ULTRASONIC ALARM .......................................................................... 7
BATTERY LIFE INDICATOR ..................................................................................... 7
BATTERY CHANGE.................................................................................................. 7
SPECIFICATIONS..................................................................................................... 9
For the care of your watch, see “TO PRESERVE THE QUALITY OF YOUR
WATCH” in the attached Warranty Booklet.

CONTENTS

Page
Page 3
CAL. 8V36
English
Time indicated by hour, minute, second and 24-hour hands
Alarm indicator
Shows the alarm engagement/ disengagement.
Ultrasonic alarm
Ultrasonic motor runs at a high speed to vibrate the watch at the designated time.
Page 4

TIME SETTING

English
Pull out CROWN when the second hand is at the 12 o’clock position and push it back in accordance with a time signal.
Pull out and turn to set the
Check that the 24-hour hand is correctly set.
When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute.
time. Then, push in.
Page 5

ULTRASONIC ALARM

English
Turn to set the alarm hand to the desired
Then pull out.
alarm time.
To set the alarm time more precisely, turn the alarm hand counterclockwise.
To set the alarm time less than 2 hours ahead of the current time, first advance the alarm hand more than 2 hours ahead of the current time and then turn it back to the exact alarm time.
Page 6
To engage the alarm To disengage the alarm
English
Pull out.
Indicating the alarm is engaged.
At the designated time, the watch vibrates for 20 seconds.
Push in.
Indicating the alarm is disengaged.
Page 7

NOTES ON ULTRASONIC ALARM

The alarm can be set on a 12-hour basis.
When using the ultrasonic alarm, make sure that the watch bracelet fits snugly on your wrist so that
the vibration of the watch can be perceived clearly.
Please note that, while you are engaged in an active sport or work requiring arm movement, the
vibration of the watch may not be perceived clearly.
The alarm time scale may be graduated differently depending on the model. When reading the current
time, take care not to mistake the alarm time scale for the current time scale.

BATTERY LIFE INDICATOR

When the battery nears its end, the second hand moves at two-second intervals instead of normal one­second intervals to indicate that the battery needs to be replaced with a new one.

BATTERY CHANGE

The miniature battery which powers your watch should last approximately 2 years. However, because the battery is inserted at the factory to check
2
Years
the function and performance of the watch, its actual life once in your possession may be less than the specified period. When the battery expires, be sure to replace it as soon as possible to prevent any malfunction. For battery replacement, we recommend that you contact an AUTHORIZED
SEIKO DEALER and request SEIKO SR43W battery.
* The battery life may be less than 2 years if the ultrasonic alarm is used more
than 10 seconds a day.
* When the battery nears its end, the ultrasonic motor runs slowly. In that case,
replace the battery with a new one. (The time accuracy is not affected)
English
Page 8
WARNING
Do not remove the battery from the watch.
English
If it is necessary to take out the battery, keep it out of the reach of children. If
a child swallows it, consult a doctor immediately.
CAUTION
Never short-circuit, heat or otherwise tamper with the battery, and never
expose it to fire. The battery may burst, become very hot or catch fire.
The battery is not rechargeable. Never attempt to recharge it, as this may cause
battery leakage or damage to the battery.
Page 9

SPECIFICATIONS

1 Frequency of crystal oscillator .......................... 32,768 Hz (Hz = Hertz … Cycles per second)
2 Loss/gain (Monthly rate) ................................... Less than 15 seconds at normal temperature range (5°
Accuracy of the alarm ....................................... ±5 minutes
3 Operational temperature range ......................... –10° C ~ +60° C (14° F ~ 140° F)
4 Duration of watch vibration ............................... 20 seconds for each time
5 Display system
Time ............................................................. 24-hour, hour, minute and second hands
Ultrasonic alarm ........................................... Designated alarm time and indication of alarm
6 Driving system
For the watch ............................................... Step motor, 1 piece
For the ultrasonic alarm ............................... Ultrasonic motor, 1 piece
7 Battery .............................................................. Miniature silver oxide battery SR43W, 1 piece
8 Battery life ......................................................... Approx. 2 years
9 IC (Integrated Circuit) ........................................ C-MOS-IC, 2 pieces
* The specifications are subject to change without prior notice for product improvement.
C ~ 35° C) (41° F ~ 95° F)
engagement/disengagement
English
Loading...