SistemaSoundBardesonidoenvolventedealtadefinición Enceinte acoustique ambiophonique à haute definition
SB201C USER MANUAL MANUAL DEL USUARIO
MANUEL DE L’UTILISATEUR
En
Es
Fr
Read the User Manual carefully before using the SoundBar and keep it for further reference.
Lea cuidadosamente el Manual del Usuario antes de utilizar el “SoundBar” y consérvelo para referencia posterior.
Veuillez lire attentivement le Manuel de l’utilisateur avant d’utiliser le système
SoundBar, puis gardez-le soigneusement pour des références futures.
SEIKI_Soundbar UG-English Original_v2.indd 1 |
|
|
2012/8/3 18:58:25 |
|
|
||
|
|
|
|
SEIKI_Soundbar UG-English Original_v2.indd 2 |
|
|
2012/8/3 18:58:25 |
|
|
||
|
|
|
|
CONTENTS
Important Safety Instructions
Precautions
Preparations
Unpacking the SoundBar
Front View / Controls / Rear View
Wall Mounting
Remote Control
Connecting the SoundBar
Operating the SoundBar
Troubleshooting
Specifications
FCC
Warranty
CONTENTS
2
3
4
8
10
11
12
13
14
1
English
SEIKI_Soundbar UG-English Original_v2.indd 1 |
|
|
2012/8/3 18:58:25 |
|
|
||
|
|
|
|
English
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
•All the safety and operating instructions should be read before operating this product and retained for further reference.
•All warnings on the appliance and in the operating instructions should be adhered to.
•Do not use this apparatus near water or moisture.
•Clean the apparatus only with a slightly damp cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instruction.
•Do not install near any heat source, such as radiator, heat registers, stoves or any other sources of heat.
•Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacle, and at the point where they exit from the apparatus.
•Only use attachments/accessories specified by manufacturer.
•Unplug the apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
•WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects with liquids, such as vases, shall not be placed on the apparatus.
No naked fame source such as candles should be placed on the product.
•WARNING: The battery or battery pack shall not be exposed to excessive heat such as sunshine, fire or the like.
•CAUTION: Changes or modifications not expressly approved by the manufacturer could avoid the user’s authority to operate this device.
•CAUTION: Usage of controls or adjustment or performance of products other than those specified herein may result in hazardous exposure.
ELECTRICAL INFORMATION
Use this appliance only with the supplied AC adapter. Using non-approved power supplies will void the warranty.
Mains Supply: The mains operating voltage of this unit is marked on a rating plate on the AC adapter.
The means of disconnecting this appliance from the mains supply is the AC Adapter/mains plug. This should be unobstructed and readily operable at all times.
2
SEIKI_Soundbar UG-English Original_v2.indd 2 |
|
|
2012/8/3 18:58:25 |
|
|
||
|
|
|
|
PRECAUTIONS
PRECAUTIONS
Security
•Before operation, check if the voltage of this product is in line with the local voltage.
•Hold the plug to disconnect it from the mains outlet. Do not pull the power cord.
•Disconnect the plug as soon as liquid or objects enter this product. Discontinue use of this product until it has been tested and verified by a qualified service technician.
Location
•Place this product on dry stable surface away from heat and damp and where it is unlikely to fall or be knocked over.
•Never put this product in direct sunlight or near heat sources.
•There are two rubber pads on the back of the SoundBar. These are provided to ensure these is space behind the SoundBar for the rear-mounted acoustic ports to operate correctly. Do not remove the rubber pads.
•If you are using the SoundBar for TV sound, place it certainly under or above the TV screen. Do not stand a TV on it.
3
English
SEIKI_Soundbar UG-English Original_v2.indd 3 |
|
|
2012/8/3 18:58:25 |
|
|
||
|
|
|
|
PREPARATIONS
PREPARATIONS
Unpacking the SoundBar
• Carefully unpack the unit. If it is damaged, please return it to the stores you purchased for
|
replacement. Remember to take your purchase receipt with you. |
|
|
• Retain the user manual. If you pass the unit onto a third part, make sure to include this |
|
English |
||
manual. |
||
|
||
|
• We suggest you retain the packaging. If you dispose of it, do so having regard to any |
|
|
recycling regulations in your area. |
|
|
||
|
The carton should contain: |
SB201C SoundBar |
Wall Mount Bracket & Screws |
User Manual
Remote Control with Battery |
User Manual |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC Adapter |
Three-way RCA Audio Cable |
4
SEIKI_Soundbar UG-English Original_v2.indd 4 |
|
|
2012/8/3 18:58:26 |
|
|
||
|
|
|
|
PREPARATIONS
Front View / Controls
1 |
2 |
3 |
4 |
English
5 |
6 |
7 |
8 |
9 |
1.
Switch the SoundBar on or to standby.
2.SOURCE
Select the audio source between LINE /
COAXIAL.
3.MODE
Select the sound mode among Movie /
Music / News / Games.
4.VOL+ / -
Increase or decrease the volume.
5.Mode Indicators
Lights up correspondingly when you cycle among MOVIE / MUSIC / NEWS / GAMES sound modes.
6.Source Indicators
Lights up correspondingly when you cycle between COAX / LINE input sources.
7.Volume Indicator
Displays the current volume.
8.Power Indicator
Illuminates Green when the SoundBar is on. Illuminates Red when the SoundBar is in standby mode.
9.IR (Infrared Receiver)
Receive IR signals from the remote control.
5
SEIKI_Soundbar UG-English Original_v2.indd 5 |
|
|
2012/8/3 18:58:26 |
|
|
||
|
|
|
|
English
PREPARATIONS
Rear View
Model: SB201C
Input Power: 15V 2.4A 36W
This device complies with part 15 of the FCC rules. Operation is subject to t he f ollowing t wo c onditions: (1) t his device may not cause harmful interference, and (2) this device must accept any interference received i ncluding i nterference that m ay c ause undesired operation.
MADE IN CHINA
1 2 3
1.DC IN
Connect to the power supply.
2.LINE IN
Connect to an analog audio output on the TV or an analog device.
3.COAXIAL IN
Connect to a coaxial audio output on the TV or a digital device.
Wall Mounting
•Place the wall mount bracket on a wall that the strength is sufficient surface and then secure it with appropriate screws.
•Fit the SoundBar into the corresponding slots of the wall mount bracket. For secure installation, make sure the mounting studs slide down to the right into the bottom of the slots.
Warning: You might need to find other appropriate screws based on your own wall materials.
6
SEIKI_Soundbar UG-English Original_v2.indd 6 |
|
|
2012/8/3 18:58:26 |
|
|
||
|
|
|
|
PREPARATIONS
Remote Control
The first time you operate the remote control, please pull out the safety strip to activate the
battery. 1
2
3
4
1. Open the battery compartment. |
5 |
2. Insert one CR2025 battery, with the |
1. |
|
polarity (+/-) as indicated. |
|
Switch the SoundBar on or to standby. |
|
2. |
Mute and restore the volume. |
|
|
|
|
3. |
VOLUME +/- |
|
|
Adjust the volume. |
|
4. |
Sound Mode Buttons |
|
|
• MOVIE |
|
|
Select the Movie sound mode. |
3. Close the battery compartment.
Notes:
•Remove the batteries from the remote control when not in use for a long period of time.
•Do not install new batteries with used ones and do not mixture different types of batteries.
•Dispose of batteries in accordance with local regulations.
•NEWS
Select the News sound mode.
•MUSIC
Select the Music sound mode.
•GAMES
Select the Games sound mode.
5.Source Buttons
•LINE
Switch the audio source to ANALOG.
•COAX
Switch the audio source to COAXIAL.
English
7
SEIKI_Soundbar UG-English Original_v2.indd 7 |
|
|
2012/8/3 18:58:26 |
|
|
||
|
|
|
|
CONNECTING THE SOUNDBAR
CONNECTING THE SOUNDBAR
The SoundBar is supplied with a three-way audio cable. It is adapted to connect both digital and stereo analog input sources.
Gently split the cable with the black plugs from the cables with red/white plugs.
The black cable can be used for digital source, the red/white cables for analog source.
English
Three-way RCA Audio Cable
Connect audio through digital audio cables
Good Quality Audio
Connect the COAX socket on the SoundBar to the COAXIAL/DIGITAL OUT socket on the device using a coaxial cable.
Note: COAX can only support PCM audio input.
Connect to the
Digital Audio out
Note: Photos shown Black Coaxial Cable connection only.
8
SEIKI_Soundbar UG-English Original_v2.indd 8 |
|
|
2012/8/3 18:58:27 |
|
|
||
|
|
|
|
CONNECTING THE SOUNDBAR
Connect audio through analog audio cables
Basic Quality Audio
Connect the LINE socket on the SoundBar to the Audio socket on the device using analog cables.
English
Red plug |
White plug |
Connect to the
Analog Audio out
Note: Photos shown Red & White Analog
Cables connection only.
Connect Power to the SoundBar
Connect the provided AC adapter to the DC-IN socket on the SoundBar and the other end to the wall outlet.
9
SEIKI_Soundbar UG-English Original_v2.indd 9 |
|
|
2012/8/3 18:58:27 |
|
|
||
|
|
|
|
English
OPERATING THE SOUNDBAR
OPERATING THE SOUNDBAR
Before using the SoundBar to play audio from connected devices, please make the necessary connections described in this user manual and switch the SoundBar to the correct source for other devices.
Switching the SoundBar On or to Standby
Press the 
button on the SoundBar or the 
button on the remote control to switch the SoundBar on or to standby.
•The LED display will show the selected source, volume, the sound mode etc. when the SoundBar is switched on.
•The LED display will show “POWER” in red when the SoundBar is in standby mode.
Note: The 
button on the SoundBar or the
button on the remote control does not switch off the SoundBar completely. Please disconnect the AC adapter from the mains socket if you plan to leave the SoundBar unattended for long periods of time.
Selecting an Input Source
Press the SOURCE button on the SoundBar repeatedly to select the desired input source between LINE /COAX, or you can select by the remote control directly.
• The LED display will show the selected source.
Adjusting the Volume
Press the VOL+/- buttons on the SoundBar or the VOLUME+/ - buttons on the remote control to adjust the volume.
•The volume range of this SoundBar is from 0 (Min.) to 30 (Max.).
•The LED display will show “- -“when the volume is zero.
Muting the Sound
Press the MUTE button on the remote control repeatedly to mute or restore the sound.
•The LED display will show “- -“when the sound is muted.
•You also can restore the sound by pressing the VOL+/- buttons.
Selecting the Sound Mode
Press the MODE button on the SoundBar repeatedly to select the desired sound mode among Movie/Music/News/Games, or you can select by the remote control directly.
• The LED display will show the selected sound mode.
10
SEIKI_Soundbar UG-English Original_v2.indd 10 |
|
|
2012/8/3 18:58:27 |
|
|
||
|
|
|
|
TROUBLESHOOTING
TROUBLESHOOTING
PROBLEM |
REMEDY |
|
|
• Make sure AC power cord is securely connected to an |
|
No power |
AC socket. |
|
• Press the Power button on the remote control or on the |
||
|
||
|
SoundBar. |
|
|
• Connect the correct audio cable from the SoundBar to |
|
|
the TV or other devices. |
|
No sound from SoundBar |
• Select the correct audio input source. |
|
|
• Make sure that the SoundBar is not muted. Press VOL |
|
|
+/- to restore the sound. |
|
|
• Make sure that both ends of the audio cables are |
|
Buzzing or Humming |
connected securely. |
|
|
• Test on an alternate device or replace the audio cable. |
11
English
SEIKI_Soundbar UG-English Original_v2.indd 11 |
|
|
2012/8/3 18:58:27 |
|
|
||
|
|
|
|
English
SPECIFICATIONS
SPECIFICATIONS
Speakers |
2 x 2.5” full range |
|
2 x 2.5” Woofer |
||
|
||
Frequency Response |
Full Range: 200 Hz – 20 kHz (+/- 3dB) |
|
Woofer: 60 Hz – 10 kHz (+/- 3dB) |
||
|
||
Audio Amplifier |
Integrated Class-D @ 20 watts x 2 CH, 4Ω THD |
|
= 1%, 1kHz |
||
|
||
Sound Pressure Level |
87 dB (1W@0.5M) |
|
Supported Sampling Frequencies |
32Khz, 44.1KHz, 48KHz, 96KHz |
|
Supported Linear PCM Bit Depths |
16-bit, 24-bit |
|
SPDIF Sample Range |
96KHz 24bit |
|
Supported Audio Engine |
High-Performance 32-Bit 73.728MHz DSP Audio |
|
Engine |
||
|
||
Input sensitivity (mV) |
500 mV rms |
|
Inputs |
SPDIF Coaxial (rear), Analog RCA (rear) |
|
Power Input |
15 DC, 36 W Max. |
|
Voltage |
100 – 240 V~, 50/60 Hz |
|
Dimensions |
37.4” (L) x 3.5” (W) x 2.28” (H) |
|
Net Weight |
5.5 lbs. |
|
Gross Weight |
7.8 lbs. |
|
Storage Temperature |
32F – 140F |
|
Operating Temperature |
41F – 95F |
12
SEIKI_Soundbar UG-English Original_v2.indd 12 |
|
|
2012/8/3 18:58:27 |
|
|
||
|
|
|
|
THE FCC WANTS YOU TO KNOW
THE FCC WANTS YOU TO KNOW
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.
Canadian DOC statement
Standard Television Receiving Apparatus Canada BETS-7
This Class B digital apparatus complies with Canadian ICES-003.
13
English
SEIKI_Soundbar UG-English Original_v2.indd 13 |
|
|
2012/8/3 18:58:27 |
|
|
||
|
|
|
|
Loading...