Seiki SE65GY25 Owner’s Manual

SEIKI _

USERMANUAL

Read the User Manual carefully before using the TV

and keep it for further reference.

Important Safety Instructions

Safety Information

2

Preparation

What's Included

Front View
Rear View

Installing the Base Stand
Removing the Stand for Wall-Mounting

Remote Control

Connecting External Devices

Customizing TV Settings

Initial Setup
Navigating the On screen Display
Selecting Input Source

Picture Settings
Audio Settings
Time Settings

Setup Settings

Lock Settings

Channel Settings

USB Multimedia

Parental Control

Troubleshooting

4
4
5

6
7
7

8

9

10

10
11
12
12

13

14

15

16
17
18

19

20

Specification

Limited Warranty

23

24

Read these instructions - All the safety and operating instructions should be read before this product is
operated.
Keep these instructions - The safety and operating instructions should be retained for future reference.

Heed all warnings -All warnings on the appliance and in the operating instructions should be adhered to.
Follow all instructions -All operating and use instructions should be followed.

Do not use this apparatus near water - The appliance should not be used near water or moisture - for
example, in a wet basement or near a swimming pool.

=

Clean only with dry cloth.

=

Do not block any ventilation openings. Install in accordance with the manufacture's instructions.

=

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding plug. A polarized ptug has two blades with
one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade

or the third prong is provided for your safety, if the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

=

Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles,
and at the point where they exit from the apparatus.

=

Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart or rack is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.

Unplug the apparatus during lightning storms or when unused for tong periods of time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in

any way, such as power supply cord or ptug is damaged, liquid has been spilled or objects have fallen into

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Please keep the unit in a welt-ventilated environment.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with

liquids, such as vases, shall not be placed on apparatus.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNING: The wall socket plug is used as disconnect device, the disconnect device shall remain

readily operable.

RISQUE CHQC ELECTRIQUE NE

This lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of non-insulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there

are no user-serviceable parts inside. Refer servicing to qualified personnel.

. The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance instructions in the literature
accompanying the appliance.

D his equipment is a Class II or double insulated electrical appliance, it has been designed in such a way

that it does not require a safety connection to electrical earth.

This product contains electrical or electronic materials. The presence of these materials may, if not disposed of
properly, have potential adverse effects on the environment and human health.
Presence of this labei on the product means it should not be disposed of as unsorted waste and must be collected

separately. As a consumer, you are responsible for ensuring that this product is disposed of properly.

H_mm This TV incorporates High-Definition Multimedia Interface (HDMI T_) technology. HDMI, the HDMI logo and

_,_,C _'_= H gh-Def n t on Mu t med a nterface are trademarks or reg stered trademarks of HDM L cens ng LLC

2

To ensure reliable and safe operation of this equipment, please read carefully read all the
instructions in this user guide, especially the safety information below.

Electrical Safety

• The TV set should only be connected to a main power supply with voltage that matches the
label at the rear of the product.

• To prevent overload, do not share the same power supply socket with too many other

electronic components.

• Do not place any connecting wires where they may be stepped on or tripped over.

• Do not place heavy items on any connecting wire,which may damage the wire.

• Hold the main plug, not the wires, when removing from a socket.

• During a thunderstorm or when not in using the television for long periods, turn off the power

switch on the back of the television.

• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist
areas, such as bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged,
liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything

accidentally penetrates the ventilation slots or if the TV set does not work normally.

• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service

the unit yourself is dangerous and may invalidate the product's warranty. Qualified personnel

must only service this apparatus.

• To avoid a battery leakage, remove batteries from the remote control, when the remote is not
use for long period, or when the batteries are exhausted.

• Do not break open or throw exhausted batteries into a fire.

Physical Safety

• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure

at least 5cm (2") clearance all around.

• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care

of the remote control.

• To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids.

• Do not install near any heat sources such as radiators, heat registers, stoves or other

apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding plug has two blades and a third

grounding prong, the wide blade, or the third prong is provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs.

• Unplug the apparatus during lightning storms or when unused for long periods.

• Refer all servicing to a qualified service personnel.Servicing is required if the apparatus does
not operate normally or if the apparatus, including the power supply cord or pulg, has been
damaged in any way.

• Servicing is also required if liquid has been spilled, or objacts have fallen into the apparatus;

when the apparatus has been exposed to rain or moisture; or if the apparatus has been
dropped.

• Always connect your television to a power outlet with protective ground connection.

What's Included

TV Set

Base Stand Six Screws

User Manual

User Manual Quick Start Guide

Remote Control with Batteries

Quick

Start Guide

4

Front View

PREPARATION

SEIKI

1, POWER

Switch the TV between On / Standby mode.

2, SOURCE

Press to select among different input signal sources.

3. MENU
Display the OSD (on screen display) menu.

4, CH +/-

Press to select a channel.

5, VOL +/-

Press to adjust the volume.

6, IR (Infrared Receiver)

Receive IR signals from the remote control.

7, POWER Indicator

Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode.

PREPARATION

Rear View

1. Power Cord
Connent to AC power outlet.

2. Headphone Socket
Connect to the Headphones.

3. USB Port
Connect to a USB storage device to play
photo files.(USB mode).

4. HDMI Inputs
Connect to a High-Definition (HD) signal

output device.

5. VGAInput
Connect to a computer or other devices

with a VGA interface.

6. PC AUDIO Input
Connect to a computer audio output.

7. COAXIAL Digital Audio Output
Connect to the audio socket on the digital

audio system.

8. DTV/TV Input

Connect to the antenna (750 VHF/UHF)

socket with the RF coaxial cable.

9. AV/COMPONENT Input

Connect to AV devices with component
(Y/Pb/Pr) video and audio output

sockets.

COMPONENT & VIDEO share with

AUDIO IN (L/R).

installing the Stand

Removing the Stand for Wall-Mounting

PREPARATION

• 1. Lay the TV face-down on a flat,
cushioned surface to avoid damaging

or scratching.

• 2. Fix the Base Stand to the Base
Support using 6pcs provided screws.

* NOTE: Attach the Base Stand in the direction

shown by the arrow.

• 1.Lay the TV face-down on a flat,
cushioned surface to avoid damaging

or scratching.

• 2.Untighten the 6 pcs screws holding

the stand support and remove it.

3.Attach the walt-mount bracket to

the TV using the mounting holes on
the back of the TV. Mount this TV

according to the instructions included
in the watt-mount bracket,

WARNING: This apparatus is intended to be supported by UL Listed waft mount bracket.