Seiki SE55UY04 Owner’s Manual
SEIK[
USER MANUAL
Read the User Manual carefully before using the TV
and keep it for further reference,
ImportantSafety Instructions
Safety Information
Preparation
What is Included
Front View
Rear View
Installing the Base Stand
Removing the Stand for Wall-Mounting
Remote Control
Connecting External Devices
Customizing TV Settings
Initial Setup
Navigating the Onscreen Display
Selecting Input Source
Picture Settings
Audio Settings
Time Settings
Setup Settings
Lock Settings
Channel Settings
USB Multimedia
Listening to Music
Viewing Pictures
4
4
5
6
7
7
8
10
10
11
12
12
13
14
15
16
17
18
18
18
Parental Control
Troubleshooting
Specifications
FCC Notes
Limited Warranty
19
21
23
23
24
Read these instructions - All the safety and operating instructions should be read before this product is
operated.
Keep these instructions - The safety and operating instructions should be retained for future reference.
Heed all warnings -All warnings on the appliance and in the operating instructions should be adhered to.
Follow all instructions -All operating and use instructions should be followed.
Do not use this apparatus near water - The appliance should not be used near water or moisture - for
example, in a wet basement or near a swimming poot.
=
Clean only with dry ctoth.
=
Do not block any ventilation openings. Instalt in accordance with the manufacturer's instructions.
=
Do not instalt near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two btades with
one wider than the other. A grounding plug has two blades and a third grounding prong. The wide btade
or the third prong is provided for your safety, if the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsotete outlet.
=
Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles,
and at the point where they exit from the apparatus.
=
Only use attachments/accessories specified by the manufacturer.
=
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart or rack is used, use caution when moving the cart!
apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in
any way, such as the power supply cord or plug is damaged, liquid has been spilled, or objects have fallen
into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Please keep the unit in a well-ventilated environment.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus should not be exposed to dripping or splashing. Objects filled with liquids,
such as vases should not be placed on the apparatus.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNING: The wall socket plug is used as disconnect device, the disconnect device shall remain
readily operable.
RISQUE CHOC ELECTRIQUE NE
This lightning flash with arrowhead symbol within an equilateral triangte is intended to
alert the user to the presence of non-insulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there
are no user-serviceable parts inside. Refer servicing to qualified personnel.
. The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions in the literature
accompanying the appliance.
This equipment is a Class II or double insulated electrical appliance, it has been designed in such a way
that it does not require a safety connection to electrical earth.
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of
properly, have potential adverse effects on the environment and human health.
Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected
separately. As a consumer, you are responsible for ensuring that this product is disposed of properly.
H_m " This TV incorporates High-Definition MultimediaInterface (HDMIT_)technology. HDMI, the HDMI logo and
.................................High-DefinitionMultimedia Interface aretrademarks or registeredtrademarks of HDMtLicensing LLC.
2
To ensure reliable and safe operation of this equipment, please carefully read all the instructions in
this user guide, especially the safety information below.
Electrical Safety
• The TV set should only be connected to a main power supply with voltage that matches the label
at the rear of the product.
• To prevent overload, do not share the same power supply socket with too many other electronic
components.
• Do not place any connecting wires where they may be stepped on or tripped over.
• Do not place heavy items on any connecting wire, which may damage the wire.
• Hold the main plug, not the wires, when removing from a socket.
• During a thunderstorm, or when not using the television for extended period of time, turn off the
power switch on the back of the television.
• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas,
such as bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged,
liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything
accidentally penetrates the ventilation slots or if the TV set does not work normally.
• Do not remove the safety covers. There are no user-serviceable parts inside. Trying to service the
unit yourself is dangerous and may invalidate the product's warranty. Qualified personnel must
only service this apparatus.
• To avoid a battery leakage, remove batteries from the remote control, when the remote is not use
for long period, or when the batteries are exhausted.
• Do not break open or throw exhausted batteries into a fire.
Physical Safety
• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at
least 5cm (2") clearance all around.
• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the
remote control.
• To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids.
• Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus
(including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding plug has two blades and a third grounding
prong. The wide blade, or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs.
• Unplug the apparatus during lightning storms or when unused for long periods.
• Refer all servicing to a qualified service personnel. Servicing is required if the apparatus does not
operate normally or if the apparatus, including the power supply cord or plug, has been damaged
in any way.
• Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus; when
the apparatus has been exposed to rain or moisture; or if the apparatus has been dropped.
• Always connect your television to a power outlet with protective ground connection.
What is Included
TV Set
Stand Support
Base Stand
User Manual
User Manual Quick Start Guide
Remote Control with Batteries
Six Screws:MP4x12-HO
Six Screws:TPW4x12A-HO
Quick
Start Guide
4
PREPARATION
Front View
..................]_
1, POWER
Switch the TV between On / Standby mode.
2, SOURCE
Press to select among different input signal sources.
3. MENU
Display the OSD (on screen display) menu.
4, CH +/-
Press to select a channel.
5, VOL +/-
Press to adjust the volume.
6, POWER Indicator
Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode.
7, IR (Infrared Receiver)
Receive IR signals from the remote control.
PREPARATION
Rear View
1. Power Cord
Connect to AC power outlet.
2. DTV/TV Input
Connect to the antenna (750 VHF/UHF)
socket with the RF coaxial cable.
3. USB Port
Connect to a USB storage device to play
compatible audio and photo files. (USB
mode)
4. HDMllnputs
Connect to a High-Definition (HD) signal
output device.
5. Headphone Socket
Connect to the Headphones.
6. COAXIAL Digital Audio Output
Connect to the audio socket on the digital
audio system.
7. COMPONENT Input
Connect to AV devices with component
(Y/Pb/Pr) video output sockets.
8. AV Input
Connect to the composite VIDEO and
AUDIO (L/R) output sockets on external
video devices.
9. PC AUDIO Input
Connect to a computer audio output.
10. VGA Input
Connect to a computer or other devices
with a VGA interface.
Installing the Base Stand
Removing the Stand for Wall=Mounting
PREPARATION
1.Lay the TV face-down on a flat,
cushioned surface to avoid damaging
or scratching.
2.Fix the base stand to the TV
using the 6 pcs provided screws of
TPW4x12A-HO.
3.Fix the stand support to the TV
using the 6 pcs provided screws of
MP4x12-HO.
1. Lay the TV face-down on a flat,
cushioned surface to avoid damaging
or scratching.
2. Untighten the 6pcs screws holding
the stand assembly and remove them.
3. Attach the walt-mount bracket to
the TV using the mounting holes on
the back of the TV. Mount this TV
according to the instructions included
in the wall-mount bracket,
WARNING: This apparatus is intended to be supported by UL Listed waft mount bracket.
Loading...