Seiki SE43FO02UK, SE43FO01UK, SE50FO04UK User Manual
颜色：单色印刷;
尺寸:140x210mm;
材质:封面100g双胶纸，内页80g双胶纸，
装订方式：骑马钉。
印刷要求
Remarks:
Size:140x210mm;
Colour:single color printing
Material:Cover 100 g offset paper,
Inside pages 80 g offset paper
centre-stitched
En
USER MANUAL
Read the User Manual carefully before using the TV
and keep it for further reference.
SE43FO02UK
1
CONTENTS
Important Safety Instructions 2
Safety Information 3
Preparation 4
What is Included 4
Front View 5
Rear View 6
Installing the Base Stand 7
Removing the Stand for Wall-Mounting 7
Remote Control 8
Connecting External Devices 10
General Operation 11
Initial Setup 11
Selecting the Input Source 14
Customizing TV Settings 15
Viewing Recorded Programme 15
Picture 17
Sound 18
Channel 19
Lock 25
Time 26
Network 27
Setting 28
Entertainment 29
MultiMedia 29
Viewing Movies 30
Listening to Music 31
Viewing Photos 32
Files 33
Using the Features 34
Electronic Programme Guide(EPG)(DTV mode) 34
Viewing Teletext(DTV mode) 35
Time Shift Function(DTV mode) 36
Recording DTV Programmes(DTV mode) 38
Programme Timer(DTV mode) 39
Digital Reception 41
Supported File Formats 41
Troubleshooting 42
Maintenance 43
Plug Replacement-UK 43
Specication 44
Dispose Information 44
Limited Warranty 45
2
Warning: To prevent the spread of re, keep candles or
other open ames away from this product at all times.
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions – All the safety and operating instructions should be read before this product is
operated.
• Keep these instructions – The safety and operating instructions should be retained for future reference.
• Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
• Follow all instructions – All operating and use instructions should be followed.
• Do not use this apparatus near water – The appliance should not be used near water or moisture – for
example, in a wet basement or near a swimming pool, and the like.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer,or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• Please keep the unit in a well-ventilated environment.
• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing. Objects lled with liquids,
such as vases should not be placed on apparatus.
• WARNING: The batteries shall not be exposed to excessive heat such as sunshine, re or the like.
• WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily
operable.
• WARNING:
To reduce the risk of electric shock, do not remove cover (or back) as there are no user-
serviceable parts inside. Refer servicing to qualied personnel.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of non-insulated “dangerous voltage” within the product’s
enclosure that may be of sufcient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions in the literature
accompanying the appliance.
This equipment is a Class II or double insulated electrical appliance. It has been designed
in such a way that it does not require a safety connection to electrical earth.
3
SAFETY INFORMATION
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of
properly, have potential adverse effects on the environment and human health.
Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected
separately. As a consumer, you are responsible for ensuring that this product is disposed of properly.
To ensure reliable and safe operation of this equipment, please carefully read all the instructions in
this user guide, especially the safety information below.
Electrical Safety
• The TV set should only be connected to a main power supply with voltage that matches the
label
at the rear of the product.
• To prevent overload, do not share the same power supply socket with too many other electronic
components.
• Do not place any connecting wires where they may be stepped on or tripped over.
• Do not place heavy items on any connecting wire, which may damage the wire.
• Hold the main plug, not the wires, when removing from a socket.
• During a thunderstorm, or when not using the television for extended period of time, turn off the
power switch on the back of the television.
• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas,
such as bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged,
liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything
accidentally penetrates the ventilation slots or if the TV set does not work normally.
• Do not remove the safety covers. There are no user-serviceable parts inside. Trying to service the
only service this apparatus.
• To avoid a battery leakage, remove batteries from the remote control, when the remote is not use
for long period, or when the batteries are exhausted.
•
Physical Safety
• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at
least 5cm (2’’) clearance all around.
• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the
remote control.
•
• Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding plug has two blades and a third grounding
prong. The wide blade, or the third prong is provided for your safety. If the provided plug does not
• Protect the power cord from being walked on or pinched particularly at plugs.
• Unplug the apparatus during lightning storms or when unused for long periods.
•
operate normally or if the apparatus, including the power supply cord or plug, has been damaged
in any way.
• Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus; when
the apparatus has been exposed to rain or moisture; or if the apparatus has been dropped.
• Always connect your television to a power outlet with protective ground connection.
4
Remote Control with BatteriesTV Set
PREPARATION
What is Included
User Manual
User Manual
Quick Start Guide
Quick
Start Guide
MINI YPBPR cable MINI AV cable
Base Stand Six Screws Stable Bracket
5
PREPARATION
Front View
1. POWER
Switch the TV between On / Standby mode.
2. SOURCE
Press to select among different input signal sources.
3. MENU
Display the OSD (on screen display) menu.
4. CH /
Press to select a channel.
5. VOL +/-
Press to adjust the volume.
6. POWER Indicator
Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode.
7. IR (Infrared Receiver)
Receive IR signals from the remote control.
6
PREPARATION
Rear View
1. LAN
Network connection port.
2. HDMI Inputs
output device.
3. SCART Socket
Connect to SCART cable between the
SCART socket on the TV and the SCART
socket on the external device (decoder,
or DVD player).
4. PC AUDIO Input
Connect to a computer audio output.
5. VGA Input
Connect to a computer or other devices
with a VGA interface.
6. DTV/TV Input
Connect to the antenna (75Ω VHF/UHF)
socket with the RF coaxial cable.
7. MINI YPBPR
Connect to AV devices with component
(Y/Pb/Pr) video and audio output sockets.
COMPONENT&VIDEO share with AUDIO
IN(L/R)subscribe to.
8. CI Slot
Used to insert a CI card. A CI card allows
you to view all the channels that you
subscribe to.
9. MINI AV
Connect to the composite VIDEO and
AUDIO (L/R) output sockets on external
video devices.
10. USB Port
Connect to a USB storage device to play
compatible video,audio ,photo and text
11. OPTICAL Digital Audio Output
Connect to the audio socket on the digital
audio system.
12. Headphone Socket
Connect to the Headphone.
7
PREPARATION
Installing the Base Stand
Removing the Stand for Wall-Mounting
1.Lay the TV face-down on a flat,
cushioned surface to avoid damaging
or scratching.
2.Fix the base stand to the TV using the
4 pcs provided screws(M4x14).
1. Lay the TV face-down on a flat,
cushioned surface to avoid damaging
or scratching.
2. Untighten the 6 pcs screws holding
the stand assembly and remove them.
3. Attach the wall-mount bracket to the
TV using the mounting holes on the
back of the TV. Mount this TV
according to the instructions included
in the wall-mount bracket.
3.Remove 2 pcs ST3x12 screw from
TV and fix the stable bracket to the
TV using the 2 pcs provided screws
(ST3x16).
8
PREPARATION
Remote Control
1. : Switch the TV between on and standby
mode.
2.
: Mute and restore your TV sound.
3. 0-9 Number Buttons: Use to select a
programme.
4. CH.LIST: Display programme list (DTV / ATV
modes).
5.
: Go back to the previous viewing channel.
6. MENU: Display the main menu
7. SOURCE: Select among the different input
signal sources: DTV / Analogue TV / Composite /
AV / SCART / Component / YPbPr / HDMI 1 /
HDMI 2 / HDMI 3 / PC-RGB.
8. OK:
: Allows you to navigate through the
OSD menu and adjust the TV's settings to your
preference.
9. RETURN: Return to previous menu.
10. EXIT: Exit the OSD menu.
11. EPG: Display the Electronic Program Guide
(DTV mode).
12. VOL + / –: Adjust the volume.
13. CH
/ : Select a channel.
14.
/RECORD: One button recording function,
press to record current program (DTV mode).
15.
: Start or pause playback (USB / DTV
modes).
TIMESHIFT: Press to turn the timeshift function
on and off (DTV mode).
16.
: Press to skip to the beginning of the
previous chapter or track (USB / DTV modes).
TTX: Turn on and off the teletext function.(ATV/
DTV Modes)
17.
: Press to skip to the beginning of the next
chapter or track (USB / DTV modes).
HOLD: Press to freeze a multi-page Teletext
passage on screen (DTV / AV / SCART modes).
18.
: Press to fast rewind (USB / DTV modes).
CANCEL: Press to cancel the Teletext mode
(DTV / AV / SCART modes).
19.
: Press to stop playback (USB / DTV /ATV
modes).
FAV: Press to show your Favourite Channels
list (DTV / ATV modes).
20.
: Press to fast forward (USB / DTV modes).
REVEAL: Press to reveal hidden information
such as answers to a quiz on Teletext (DTV /
AV / SCART modes).
21. RED / GREEN / YELLOW / BLUE: Use these
buttons to select corresponding function shown
on screen and in menus.
22. INDEX: Press to select the page number of the
index from Teletext (DTV mode).
23. SUBPAGE: Press to display the subpage on
the Teletext screen (DTV / AV / SCART modes).
9
PREPARATION
24. SIZE: Press to enlarge the picture on the TV
Teletext (DTV / AV / SCART modes).
25. LANG: Select the DTV audio language (DTV
mode).
: Press to switch between different audio
languages (only applicable when the broadcast
supports this function).
26. SUBTITLE: Press to display the subtitles
broadcast with the program (DTV mode).
Selects the subtitles on the USB drive (USB
mode).
27. DISPLAY: Press to show information about the
current screen such as current channel or input
source.
28. ASPECT: Select from the following settings:
Auto / 4:3 / 16:9 / Zoom 1 / Zoom 2 / Subtitle/
Just Scan(Only HDMI mode).
29. FREEZE: Freeze the picture.
30. TV.RD: Press to select between TV and Radio
programs (DTV mode).
31. P.MODE: Press to select picture mode.
32. S.MODE: Press to select sound mode.
33. SLEEP: Press to set the TV's sleep timer.
Note:
Remove battery during storage or when you are not
using the device for a long time.
To control the device using the remote control, point
the remote control at the device and then press the
button with the required function.
The maximum range of the remote control is about
5 meters with a deviation of up to +/- 30° from the
perpendicular direction to the reception sensor of
the remote control on the front side of the device.
The f alling capacity of th e batteries gradually
reduces the remote control range.
There must be no s olid obsta cles in the area
between the remote control and the device when
the remote control is being used.
During standard use the lifetime of batteries in the
remote control is about 1 year.
When the effective range of the remote control is
substantially reduced, or when there are problems
with its use, change both the batteries in the remote
control.
If you will not be using the remote control for a
longer period of time, take out both batteries from
it - in this in this way you will prevent potential
damage caused by their leakage.
10
CONNECTING EXTERNAL DEVICES
11
N
Initial Setup
• Connect one end of an RF coaxial cable (not supplied) to the aerial socket
in your wall. Connect the other end of the cable to the RF (
75Ω
) socket in the
bottom connection panel on the back of the TV.
• Attach all other devices to the TV following instructions.
• Connect the TV's mains cable into a wall socket and turn the power on if
required.
• In standby mode, press the button on the main unit or on the remote control
to turn the TV on. The red LED indicator will turn blue.
• The first time you turn your TV on it will go straight to the Welcome screen.
Press the EXIT button to go to the No Signal screen.
• After pressing the OK button you will go to the First Time Installation menu.
GENERAL OPERATION
(Local Rates Apply)
12
GENERAL OPERATION
• Language is preset to English and Français/ Deutsch/ Italiano/ Português/
Español for optional.
• Country is preset to UK and France/ Germany/ Italy/ Portugal/ Spain for optional.
• Now press the ▼ button on the remote control to select Tuning mode. Use the
buttons to select either DTV + ATV (analogue and digital channels), DTV
(digital channels only) or Analogue TV (analogue channels only).
• Press the ▼ button on the remote control to select Environment. Use the
buttons to select between Home Mode or Store Mode. If you select to change
to store mode, a warning screen will appear asking if you want to leave home
mode. If you do, press the
button to continue
Note: Store Mode should only be used if the TV is to be used as a display in a
shop.
• Once you have completed all of the preliminary settings, use ▼ to select Auto
Tuning to begin channel tuning.
• Note: You can skip the tuning process by pressing the MENU button. A pop-
up screen will appear, press the
button to select 'Yes'
You can also press the EXIT button to stop the channel tuning process.
• When the tuning process has finished the Country menu will be displayed,
press the OK
13
GENERAL OPERATION
• The Primary Region menu will now be displayed, press the OK to conrm.
• After pressing the OK button you will have completed the rst time setup and
your TV will be ready to use.
Loading...