Securitron PDB-8C8R1, PDB-8C8R2, AQD1-4C1, AQD1-4F1, AQD1-8C1 Specsheet

Securitron AQ Series
Power Supplies

Product Overview

With a wide range of options, ASSA ABLOY
has the power solution to fit your every need,
from wall to rack mounted solutions

Power supply selection is often one of the last
decisions made when designing an electrified
access control solution. However, selecting
the right power supply is as important as
choosing the right locking devices and
accessories that may be connected to it.

Securitron power supplies offer clean, efficient
and reliable power solutions for any application,
including options for high efficiency sustainable
locking solutions. Available in configurations
to support the smallest single door systems to
the largest enterprise access control systems.

• For a low power solution, Securitron

EcoPower® reduces standby power
supply consumption by 99%; EcoPower
is designed to work with low-power
electrified access control devices

• Power over Ethernet extractors and

injectors provide integrated power and
data over low-cost CAT-5 cabling

• Linear power supplies offer multiple low noise

power options for sensitive electronics

• Rack mounted power supplies offer a

valuable space-saving solution to provide
power to access control devices such as
electrified door hardware and more

• Switching power supplies are a more

cost effective, energy efficient solution
for access control systems; Available in
wall mount and rack mount options

• Power transfers assist in the secure transfer

of power and/or data from the frame
to electrified hardware on the door

AQD6 Power

Supply

M32/M62

Armored

Door Cord

TSB

J-Box

EXIT ENTRY

Door

Controller

DK-37

Keypad

Let ASSA ABLOY help determine which
power supply will meet your exact
requirements for any new or existing
electrified access control solution.

The Securitron AQ Series of switching power supplies are dual (AQD),
and single (AQS) voltage supervised units with a battery charger designed
to power magnetic locks, electric strikes, card readers, sensors, access
control boards and other devices in access control systems. The AQ Series
can also be used to power DC cameras and other DC locking equipment.
These units provide field selectable dual (AQD) or single (AQS) 12 or 24
VDC with up to 16 independently controlled power limited outputs.

Protection | Efficiency | Support

Protect and enhance the performance
of access control devices and systems
with Securitron AQ Power Supplies.

Mix & Match UL Listing

• Available in one to 16 Amp variants to suppor t the smallest single door

systems to the largest enterprise access control systems

• UL listed dynamic f ield configurable product offering

• Combine any of the seven power supplies and nine distribution boards

in any UL listed enclosure and maintain UL code compliance

Protection & Efficiency

• Heavily filtered and regulated output provides bet ter-than-linear performance

• Up to 93% efficiency, which results in decreased operating

costs which lengthens the lifespan of electronics

• Low battery cutoff protects readers and other sensitive components from under-voltage

Friendly & Knowledgeable Support

• Customer Service and Technical Support of fer tools and

resources to address questions of all shapes and sizes

• Free, custom wiring diagram support available

• No-fault, no questions asked warranty covers installation errors

Specifications

Certifications (Both)

• UL294 Listed

• UL603 Listed

• ULC-S 318 List ed

• ULC-S533 Liste d

• RoHS Compliant

• REACH Compliant

Electrical

• 115 or 230 VAC input (except AQD1)

• Support s up to two (2) sealed gel, AGM

or wet lead acid batteries

• Up to 93% efficiency

• Low noise design with ripple as low as 70mV p-p

• Outputs are Class 2 limited when used with

PTC polyswitch distribution boards

• Dual voltage 12 or 24 VDC field

selectable continuous output

• Single voltage 12 or 24 VDC continuous output

Operating Temperature

• -4° to 122°F [-20° to 50°C]

Shipping Weight

• 12.7 lbs [5.76kg]

Features

• All combinations of AQ power supplies and

distribution boards are UL Listed

• Tolerates brownout or over-voltage

input ± 15% of nominal voltage

• Thermal shutdown protection with auto restart

• Circuit breaker protects against

over-current and reverse battery faults

• Integrated or dedicated batter y charging circuit

prevent s over-voltage on locking devices

• Expandable up to 16 outputs in the standard enclosure

• Available with a single relay f ire trigger or

individually triggered relayed outputs

• Low battery cutoff at 9V for all except AQD1*

*Batter y disconnect module available. Please contact the factory.

Dimensions

• 14" x 14" x 4-3/4"

[355.6mm x 355.6mm x 120.65mm]