Securitron M34RD, M34RBD, M34RB, M34R Specsheet
D
www.securitron.com | techsupport@securitron.com
© 2015, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
B
E
E
F
D
A
A
B
MODEL
M34R
MAGNET
A
10.55B1.5C1.125
NOTE: FASTENERS NOT SHOWN-ALL DIMENSIONS IN INCHES.
MODEL
M34R
STRIKE
A
6.4B1.45C0.438
D
0.95E2.25F0.725
ELECTROMAGNETIC LOCK – Model 34R
C
C
Features
• 600 pounds of pull-apart holding force
• Lifetime replacement warranty
• Power co
nsumption of 320mA @ 12VDC & 170mA @ 24VDC–4 Wa
• Automatic d
ual voltage, 12 VDC or 24 VDC,
no field adjustment required
tts
• Instant release circuit, no residual magnetism
• Recessed fo
• Fully sealed electronics, tamper proof & weathe
• Arch
itectural brushed st
r aesthetically appealing finish
r proof
ainless steel finish
• Ten feet of jacketed stranded conductor
• Lock and strikes plated to provide corrosion resistance
• Also available in Bondstat model
• F
ail Safe
• UL liste
d
Options
• Bondstat Form ‘C’ – Instantaneous lock status sending without the use of auxiliary
switches or
• DPS Door Status – Integrated door reed switch w/ built in resettable polyswitch
reed relays
ELECTROMAGNETIC LOCK – Model 34R (cont’d)
Operating Temperature
-40 to 60C [-40 to 140F]
How to Order
Part N
M34R Maglock Model 34R, Dual Voltage, Recessed
M34RB Maglock Model 34R, Dual Voltage, Recessed, Bondstat
M34RD Maglock Model 34R, Dual Voltage, Recessed, Door Position
M34RBD Maglock Model 34R, Dual Voltage, Recessed, Bondstat, Door Position
umber
Product Description
ARCHITECTURAL SPECIFICATION – Electromagnetic Lock
Model 34R
2.x MAGNETIC LOCKS
A. All electromagnetic locks shall be manufactured by Securitron Magnalock Corp.,
Sparks, NV, an ISO 9001 certified manufacturer.
B. Locks shall be capable of providing a pull-apart or tensile holding force of at least
600 pounds. A laboratory test certifying the minimum holding force shall be
submitted by the manufacturer upon request.
C. Electromagnetic locks shall have a lifetime replacement warranty.
D. Locks shall be dual voltage with no field adjustment necessary to select voltage.
E. Locks shall not consume more than four and one-half (4.5W) watts of power (320
mA @ 12VDC) and (170mA @ 24VDC).
F. Locks shall be fully sealed in resin to provide tamper and weather proofing.
G. Mount strike plates to provide a "floating" movement to assure automatic self-
alignment with the lock.
H. Finish is architectural brushed stainless steel.
I. Ten feet of jacketed stranded conductor shall be provided for electrical connection.
Loading...