Securitron HHSR-62, HHSR-32, HHSL-62, HHSL-32, HHD-82 Installation Instructions
...
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader
(
)
Tel 800.624.5625 techsupport@securitron.com
in door opening solutions
FULL LENGTH LOCK HOUSING MODELS HHD, HVD, HHSL AND HHSR
FOR M32, M62 AND M82 MAGNALOCKS – INSTALLATION INSTRUCTIONS
1. DESCRIPTION
Securitron’s full length Magnalock housings are furnished complete with a brushed stainless steel
cover, two (2) end caps, an aluminum mounting plate and mounting hardware. These housing s
provide an attractive and secure lock installation option and are offered in three configurations:
HVD
VERTICAL MOUNT
DUAL LOCK
SINGLE DOOR
NON-HANDED
HORZONTAL MOUNT
HHD
DUAL LOCK
DOUBLE DOOR
NON-HANDED
HHSL/HHSR
HORIZONTAL MOUNT
SINGLE LOCK
SINGLE DOOR
HANDED (HHSR Shown)
2. OVERVIEW
Upon unpacking, an inventory should be made to ensure that all the required components and
hardware have been included. Along with these instructions, the Full Length Housing package
should contain the following items:
HOUSING ASSEMBLY:
1X MOUNTING PLATE +
1X COVER (PRE-ASSEMBLED)
2X END CAPS
HARDWARE PACK(S):
2X FOR HVD & HHD
1X FOR HHSL & HHSR
ALL MODELS
© Copyright, 2011, all rights reserved PN# 500-16600
Page 1 Rev. D, 07/11
INCLUDED HARDWARE (Quantities shown are per single pack):
2X All Models 2X All Models 2X All Models
Phillips Head W/ Washer
#8 X 1/2” TEK
Socket Head Cap
1/4-20 X 1”
Blind Nut
1/4-20
8X -32 Models
2X -32 Models 4X -62/82 Models
9X -62/82 Models
Socket Head Cap
1/4-20 X 1-3/4”
Socket Head Cap
1/4-20 X 2-1/2”
Phillips Flat Head
#12 X 1-1/2” Type “A”
3. RECOMMENDED TOOLS
Hammer
Center Punch
Drill Motor & Bits
Phillips Screwdriver: #2
Wrench, Hex, 3/16”
Wire Strippers/Crimpers
Pliers
Metal File
Wrench, 1/2” Open-end (or adjustable)
4. INSTALLATION
Unpack the housing. Without disassembling, position the unit into its intended location to verify
that it is the correct length/height for the door opening. For the dual Magnalock models (HHD
and HVD), the lock/strike locations are equally spaced to each side of center of the housing as
shown. (All dimensions displayed in brackets [XX.X] are in millimeters).
HHD-32
HHD-62
HHD-82
Figure 1
PN# 500-16600
Page 2 Rev. D, 07/11
Loading...