Seco-Larm SL-S212-WAQ Specsheet
Operating voltage
12VDC
Current draw per LED strip
200mA@12VDC
Current draw per 3-LED segment
50mA@12VDC
Dimensions
12”x7/16” (305x10 mm)
Number of LEDs
12
Distance between LEDs
1” (25mm)
Operating temperature
-5°~115° F (-20°~45° C)
Weight
0.4-oz (11.4g)
12-Inch Flexible LED Strips
Features:
Flexible LED Strip easily installs anywhere
Can be cut every 3 LEDs
Energy efficient—only 2.4W
Emits no UV or IR radiation
Gold-plated connector for reliability
Connect up to 30 strips in series
Self-adhesive backing for easy installation
Wide 120° beam spread
Reverse polarity protection
Three brightness levels
Each unit comes with one LED Strip and
one 4-pin LED Adapter
Specifications:
SL-S212-RAQ Red
SL-S212-WAQ
pi-SL-S212-xAQ.docx
1-949-261-2999
1-800-662-0800
1-949-261-7326
Web: www.seco-larm.com
Email: info@seco-larm.com
Copyright © 2010
SECO-LARM U.S.A, Inc.
All rights reserved
16842 Millikan Avenue
Irvine, CA 92606
Tel:
Fax:
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
SECO-LARM
®
SL-S212-BAQ Blue
SL-S212-YAQ Yellow
Flexible Installation Options:
Optional Accessories Available:
Each strip has 12 LEDs.
Applications:
Visual signaling
Fence and gate lighting*
Stairway and safety lighting
Accent lighting on vehicles, doorways, cabinets, etc.
Display and tradeshow lighting
Can be cut at every 3 LEDs*
*Connectors must be housed or epoxied for use outdoors.
LED End
Cap
LED Strip
Fastener
LED Power
Connector
Installs on the end of
the strip to cover the
connections.
Installs over the strip
to fasten it to a
mounting surface.
Plugs into the end of
the strip for easy
connection to power.
SL-SAS-EC1Q
SL-SAS-SH1Q
SL-SAS-PC1Q
*Middle segments will not function on their own. Cut segments must be
connected to end segments.
4-Pin LED Adapter (1 included)
Connect up to 30 LED strips
4-pin LED
Adapter
Loading...