Seco-Larm SL-S212-BAQ User Manual
LED Color
Model
Red
SL-S212-RAQ
Yellow
SL-S212-YAQ
Blue
SL-S212-BAQ
White
SL-S212-WAQ
Flexible LED Strip easily installs
anywhere.
Can be cut every 3 LEDs.
Gold plated connector for reliability.
Connect up to 30 LED Strips
(12-inches each).
Self adhesive backing for easy
installation.
Wide 120° beam spread.
Energy efficient—only 2.4W.
Three brightness levels.*
*May require additional wiring
Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.
Flexible LED Strip
Manual
ENFORCER ® Flexible LED Strip
Operating voltage
12VDC
Number of LEDs
per strip
12
Current draw per
LED Strip
200mA@12VDC
Distance between
LEDs
1” (25mm)
Current draw per
3-LED segment
50mA@12VDC
Operating temperature
-5°~115° F
(-20°~45° C)
Dimensions
12”x7/16” (305x10 mm)
Weight
0.4-oz (11.4g)
LED Specs:
Model
Color
Color temperature /
Wavelength
Lumen output
SL-S212-WAQ
White
2500~3500 K
1200~2000 mcd
SL-S212-BAQ
Blue
465~475 nm
400~500 mcd
SL-S212-RAQ
Red
620~635 nm
950~1050 mcd
SL-S212-YAQ
Yellow
585~595 nm
950~1050 mcd
Overview:
The SL-S212 series of ENFORCER Flexible LED Strips provides energy efficient illumination in a
flexible package, perfect for a wide variety of indoor lighting applications. The lightweight Flexible
LED Strips can be placed anywhere, trimmed to length and output only minimal heat.
Specifications:
Installation:
WARNINGS:
THE SL-S212 FLEXIBLE LED STRIP IS FOR INDOOR USE ONLY AND SHOULD NOT BE
EXPOSED TO MOISTURE, WEATHER OR HIGH HUMIDITY.
DO NOT FOLD STRIP. DO NOT BEND STRIP REPEATEDLY OR INSTALL IN SUCH A WAY
THAT MAY CAUSE STRIP TO BEND REPEATEDLY. DAMAGE MAY RESULT.
Mounting:
1. The LED Strip can be mounted anywhere using the self adhesive mounting strip on the back.
2. For installations where use of the adhesive strip is not practical or not applicable, use
another fastener such as optional SL-SAS-SH1Q Strip Fastener (sold in packs of 10).
NOTE: When mounting, do not pierce the LED Strip, as internal circuitry may be damaged.
End Caps: (Optional—Sold in packs of 10)
1. For protection against accidental short circuit, dust and water, place optional SL-SAS-EC1Q
End Cap over the unconnected end of the LED Strip.
2. For further protection, seal end cap with silicon sealant.
NOTE: Sealing the end cap will increase the water resistance of the LED Strip but will not
make it applicable for outdoor use. LED Strip is for indoor use only.
Power supply (not included)
1. Choose a power source which will supply 12VDC with current capacity of 200mA or more
per LED strip connected:
(# of strips) x (0.2A) x (1.1*) = total current capacity required.
*Always maintain a margin of safety by choosing a power supply with at least 10% additional current capacity.
2 SECO-LARM® U.S.A., Inc
Loading...