Seco-Larm SL-1901-DAQ, SL-1901-JAQ User Manual
Installation to
Conduit Drop
Installation to
Installation to Conduit Box
SL-1901-DAQ Strobe Light to Conduit Drop Bracket
Overview
Parts List
1x
Drop Bracket (SL-1901-DAQ) or
Box Bracket (SL-1901-JAQ)
4x
Medium Screws (for Conduit Drop
and Conduit Box Installation)
1x
Adapter Plate
2x
Short Screws
1x
Rubber Gasket
2x
Long Screws
1x
Manual
These brackets may be used together or separately to allow for 3 different installation
possibilities for a strobe light: to
conduit box in conjunction with a conduit drop.
`
SL-1901-JAQ Strobe Light to Conduit Box Bracket
Installation Guide
either a conduit box or conduit drop separately, or a
Conduit Box
and Conduit Drop
ENFORCER Strobe Light to Conduit Mounting Brackets
To Conduit Box Only
To Conduit Box and Conduit Drop
Step Two:
Plate
Box/Drop in Step One)
To Conduit Drop Only
Step One:
box/
shown below
Conduit Dro p
Conduit Dro p
Conduit Box
(Install First)
Conduit Box
Oval Unthrea ded Hole
Short Screws (Included)
Oval Unthrea ded Hole
Oval Unthrea ded Hole
Medium Screws (Include d)
Adapter Plate (Included)
Adapter Plate (Included)
Short Screws (Included)
Adapter Plate (Included)
Short Screws (Included)
Adapter Plate (Included)
Rubber Gaske t (Included)
Note Gasket Orientation
Strobe Light Lens
Long Screws (Included)
Strobe Light Base
Extending Through Base)
Threaded Hole
NOTICE: The information and specific ations printed in this manual are current at the time of publ ication. However, the
SECO
change specifications without notice.
Copyright © 201
This material may not be reproduced or copied, in whole or
in part, without the written permission of SECO
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for 1 (one) year from t he date of sale t o the original customer.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800
Email: sales@seco-larm.com
Order Part #:762-118-1%
Sample Installation
After installing/assembling conduit
conduit drop, attach adapter plate as
Install Strobe Light to Adapter
(already attached to Conduit
(Use Two Larger Holes
-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
5 SECO-LARM U.S.A., Inc. All rights reserved.
2 SECO-LARM U.S.A., Inc.
SECO-LARM is also not r esponsible for m isprints or typographical errors.
-LARM.
MiSL-1901-xAQ_151106.docx
PICSN4
Loading...