Seco-Larm SL-126Q-A, SL-126Q-B, SL-126Q-C, SL-126Q-G, SL-126Q-R User Manual

SL-126 Strobe Lights Installation Manual

SL-126

35T8

STROBE LIGHTS

Picture of strobe
light with new label
to be placed here.

ONLY 2-WIRE CONNECTION FOR 6-12 VOLTS

■ For "informative" general
signaling requirement
applications.

■ Powerful xenon tube makes
flash visible from a distance

■ Improper polarity connection
will not damage circuitry

■ Heavy-duty 18-gauge leads

■ Operating lifetime of over 300

hours

■ Temperature range from

o

F (-30oC) to 140oF (60oC)

22

■ Lens is made of high-impact
and heat-resistant acryrex.
Available in clear, amber, red,
or blue (Also available
separately.)

■ Case is made of high-impact
resistant abs plastic, with an
approx. diameter of 4" (10cm)

■ Four strobe lights available:
SL-126A — Amber lens
SL-126B — Blue lens
SL-126C — Clear lens
SL-126R — Red lens

*

* CE approved products are identified with the CE mark on the product.

Contact SECO-LARM for further details.

SPECIFICATIONS

Circuits

All solid-state

Input Connections

Red: Positive Black: Negative

Leads

18-gauge UL Listed, 12" long

Electrical Protection

Reverse polarity protected

Illumination

100,000 candle power

Input Voltage

6 to 12VDC

Input Current

120mA ± 20% at 6VDC
200mA ± 20% at 12VDC

2.913"

3.937"
(100mm)

(74mm)

0.866"

(22mm)

SL-126 Strobe Lights Installation Manual

Flash Rate

Over 60/minute at 6VDC
Over 90/minute at 12VDC

Operating Life

Over 2,000,000 flashes

Operating Life (Hours)

450 at 6VDC 300 at 12VDC

Environment

-22oF (-30oC) to 140oF (60oC)

Base

High-impact black ABS

Lens

High-impact and heat resistant
acryrex. Available in clear, amber,
red, and blue.

)
mm

2.047"

(52

12"

(305mm)

2.795"

(71mm)

Requires two mounting
screws ø3X46 TP2
(included).

DIA 0.09"
(ø2.3mm)

Mounting
Template

2.795"

(71mm)

NOTICE

The information and specifications printed in this manual are current at the time of publication.
However, the SECO-LARM policy is one of continual development and improvement. For this reason,
SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not
responsible for misprints or typographical errors.

Copyright © 2001 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced
or copied, in whole or in part, without the written permission of SECO-LARM.

SECO-LARM® U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA, 92606, U.S.A.

SECO-LARM U.S.A., Inc.

filename: MuSL126b.p65