Seco-Larm SL-126-A24Q-A, SL-126-A24Q-B, SL-126-A24Q-C, SL-126-A24Q-G, SL-126-A24Q-R User Manual

SL-126-A24 Strobe Lights Installation Manual

SL-126-A24

STROBE LIGHTS

Picture of strobe
light with new label
to be placed here.

■ For "informative" general
signaling requirement
applications only.

■ Powerful xenon tube makes
flash visible from a distance.

■ Improper polarity connection
will not damage circuitry.

■ Heavy-duty 18-gauge leads.

■ Lens is made of high-impact

and heat-resistant acryrex.
Available in clear, amber,
red, or blue (Also available
separately.)

■ Operating lifetime of over 300
hours.

■ Case is made of high-impact
resistant abs plastic, with an
approx. diameter of 4" (10cm).

■ Temperature range from

o

F (-30oC) to 140oF (60oC)

22

■ Four strobe lights available:
SL-126A-A24 — Amber lens
SL-126B-A24 — Blue lens
SL-126C-A24 — Clear lens
SL-126R-A24 — Red lens

Page 1

SL-126-A24 Strobe Lights Installation Manual

SPECIFICATIONS

Circuits

All solid-state

Input Connections

Red: Positive Black: Negative

Leads

18-gauge UL Listed, 12" long

Electrical Protection

Reverse polarity protected

Illumination

100,000 candle power

Input Voltage

6 to 24VDC

Input Current

30mA ± 20% at 6VDC, 120mA ± 20% at 12VDC
150mA ± 20% at 24VDC

2.913"

3.937"
(100mm)

(74mm)

0.866"

(22mm)

Flash Rate

Over 30/minute at 6VDC
Over 70/minute at 12VDC
Over 100/minute at 24VDC

Operating Life

Over 2,000,000 flashes

Operating Life (Hours)

1000 at 6VDC, 450 at 12VDC, 300 at 24VDC

Environment

-22oF (-30oC) to 140oF (60oC)

Base

High-impact black ABS

Lens

High-impact and heat resistant acryrex.
Available in clear, amber, red, and blue.

)
mm

2.047"

(52

12"

(305mm)

2.795"

(71mm)

Requires two mounting
screws ø3X46 TP2
(included).

DIA 0.09"
(ø2.3mm)

Mounting
Template

2.795"

(71mm)

NOTICE

The information and specifications printed in this manual are current at the time of publication.
However, the SECO-LARM policy is one of continual development and improvement. For this reason,
SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not
responsible for misprints or typographical errors.

Copyright © 2001 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced
or copied, in whole or in part, without the written permission of SECO-LARM.

SECO-LARM® U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA, 92606, U.S.A.

SECO-LARM U.S.A., Inc.

filename: MuSL126_24b.p65