SECO-LARM SD-7202GC-PE User Manual
SD-7202GC-PE Green, 2" square, push-button
Features:
Stainless-steel, single-gang message plate.
Large (2” square), illuminated, momentary
push button.
"PUSH TO EXIT” message can be replaced
with “PRESIONE PARA SALIR” message.
N.O./N.C. contacts rated 10 Amps.
Included:
“PUSH TO EXIT” and “PRESIONE PARA
SALIR” message plates.
Five color-coded, 12-inch, AWG 18 wire
leads with easy-to-attach spade lugs for
fast installation.
Stainless-steel single-gang plate.
Replacement bulb
(12V, 1.2W, 15,000-hour life).
Resistor (150 ohm, 1 Watt).
“PRESIONE PARA SALIR”
message plate also included
Connection
Diagram:
Green (light bulb) 12V or
24V (requires resistor)*
Blue/White (for N.O.)
Green/White (for N.C.)
*Note: Use 150 ohm, 1 watt resistor on either one of
Green wires for 24 volt bulb operation.
Copyright 2008 SECO-LARM U.S.A., Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
16842 Millikan Avenue, Irvine, CA 92606
Green (light bulb) 12V or
24V (requires resistor)*
White (COM)
10A @ 125~250VAC
1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326
Email: info@seco-larm.com Website: www.seco-larm.com
Dimensions:
2.75” (70mm)
2” (51mm)
4.5” (1 14mm)
2.125”
(54mm)
2” (51mm)
SD-7202GC-PE.cdr
®
Loading...