Seco-Larm SB-P1012-26Q Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright 2014 © SECO-LARM U.S.A, Inc. All rights reserved.

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to

change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PI_SB-x10xx-2xQ_160203.docx

Plug-and-Play Backup Power

Features:

 Real-time backup power with no break when input power is lost
 DC UPS Auto-start
 Batteries provided by GE™ (2600mAh user-replaceable Lithium Ion - SB-P1012-26Q /

2000mAh lithium polymer - SB-L10V1-20Q)

 Over-discharge, overcharge, overload, short-circuit, and surge protection on input and output
 LED indicators for power and backup operation

Additional features for SB-L10V1-20Q

 Auto-recognize voltage (5/7.5/9/12VDC) input and set corresponding output
 Additional indicator LEDs for output voltage and an audible / visible (LED) alarm warning of

an overload, voltage issue, or low battery.

Model

SB-P1012-26Q

SB-L10V1-20Q

Type

Plug-in UPS adapter

In-line UPS

Input

85~265VAC@50/60Hz

5/7.5/9/12VDC±10%

Input protection

Overload and short-circuit fuse

Output

12VDC±5%

Auto-configure 5/7.5/9/12VDC±5%

Output power rating

10W

Output protection

Over-discharge, overload, short-circuit protection

Battery

Replaceable GE™ Li-Ion 18650

3.7VDC/2600mAh

GE™ Lithium Polymer

3.7VDC/2000mAh

Battery Protection

Overcharge, over-discharge,

overload, short-circuit, battery polarity

Overcharge, over-discharge,

overload, short-circuit

Backup
time

Half Load

70 min

60 min

Full Load

30 min

25 min

LED indicators

Power, backup

Voltage, power, alarm, backup

Output cord

5.5ft / 1.4m

12" (30.5cm)

Output plug

5.5x2.1mm

Operating temperature

32~104°F (0~40°C)

Operating humidity

0~95% non-condensing

Dimensions

37/16"x27/8x"15/32" (87x59.8x29mm)

33/8"x21/4x"121/32" (85x57x42mm)

Weight

4.3-oz (122g)

4.3-oz (121g)

Specifications:

SB-P1012-26Q

Plug-in Backup Power

LED Status Indicators:

SB-P1012-26Q – Plug-in Backup Power
SB-L10V1-20Q – In-line Backup Power

ENFORCER's Plug-and-Play Backup Power units provide backup
power during temporary power outages.
The SB-P1012-26Q Plug-in Backup Power replaces the original
12VDC power adapter for a simplified installation.
The SB-L10V1-20Q In-line Backup Power installs between the
original power adapter and the powered device and auto-selects
5, 7.5, 9, or 12VDC.

SB-L10V1-20Q

In-line Backup Power

SB-P1012-26Q

Power
Backup

SB-L10V1-20Q

Voltage (Green)
Power (Green)

Alarm (Red)
Backup (Yellow)

12V 9V 7.5V 5V