Seco-Larm SB-L10V1-20Q Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright 2015 © SECO-LARM U.S.A., Inc. All rights reserved.

All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PI_SB-L10V1-20Q_151120.docx

SB-L10V1-20Q

Original Power

Adapter

1 2 3

4 5 6

7 8 9

*

0 #

12V 9V 7.5V 5V

ENFORCER

®

* DC plug adapters (not

Included) may be required for
devices which do not accept
standard 2.1mm DC plugs.
Note: Do not cut the DC plug
cord as this will void the
warranty.

Plug-and-Play Backup Power

Features:

 Real-time backup power with no break when input power is lost
 DC UPS Auto-start
 2000mAh Lithium polymer battery
 Over-discharge, overcharge, overload, short-circuit, and surge

protection on input and output

 LED indicators for power and backup operation
 Auto-recognizes voltage (5/7.5/9/12VDC) input and sets

corresponding output

 Additional indicator LEDs for output voltage and an audible/visible

(LED) alarm warning of an overload, voltage issue, or low battery.

Model

SB-L10V1-20Q

Type

In-line UPS

Input

5/7.5/9/12VDC±10%

Input protection

Overload and short-circuit fuse

Input jack type

5.5x2.1 mm DC jack

Output

Auto-configure 5/7.5/9/12VDC±5%

Output power rating

10W

Output protection

Over-discharge, overload, short-circuit protection

Battery

Lithium Polymer 3.7VDC/2000mAh

Battery Protection

Overcharge, over-discharge, overload, short-circuit

Backup
time

Half Load

60 min

Full Load

25 min

LED indicators

Voltage, power, alarm, backup

Output cord

12" (30.5cm)

Output plug

5.5x2.1 mm DC plug

Operating
temperature

32~104°F (0~40°C)

Operating humidity

0~95% non-condensing

Dimensions

33/8"x21/4"x121/32" (85x57x42 mm)

Weight

4.3-oz (121g)

Sample Application:

SB-L10V1-20Q – In-line Backup Power

ENFORCER's SB-L10V1-20Q Plug-and-Play In-line
Backup Power provides backup power during
temporary power outages. The In-line Backup Power
installs between the original power adapter and the
powered device and auto-selects 5, 7.5, 9, or 12VDC.

Specifications: