Seco-Larm SA-025Q Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright 2014 © SECO-LARM U.S.A, Inc. All rights reserved.

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the

right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

Pi_SA-025Q_1406.docx

SA-026Q

Miniature

Timer Module

SA-025EQ

Delayed Egress

Timer

SA-027WQ

7-Day
Timer

SA-027HQ

365-Day

Annual Timer

Multi-Purpose Programmable Timer

SA-025Q

Features:

 Timer can be set from 1 second to 60 minutes
 Can be triggered by positive voltage (+DC), or closure or

opening of dry contact

 Relay can be programmed to activate at the start or at the

end of the timing cycle

 Relay can also be set to activate for one second at the end of

the timing cycle

 Programmable for pulse (flash) activation
 Built-in reset function to manually reset timing cycle
 Form C relay, contacts rated 8A@120VAC/24VDC
 LED indicates relay is energized
 12VDC/24VDC Operation (auto sensing)
 Current: 1mA (standby), 50mA (active)
 Board measures 2

7

/8" x 21/2" (73x63 mm)

 Functions programmed via DIP switches – no jumpers to cut

Sample Application:

Also Available from SECO-LARM®:

The ENFORCER® SA-025Q Multi-Purpose
Programmable Timer is suitable for use with a
wide range of timed security and access control
products, such as electric door strikes, sirens, or
bells. DIP switches for programming and auto­sensing of input voltage make installation easy.

In this application, the SA-025Q is connected to an electric strike
(SD-995C) and an N.O. contact or switch. The output is set via the
DIP switches for a momentary trigger with no delay.

1 2 3 4 5 6

ON

+12~24 VDC

Power Supply

N.O. Contact

or Switch

(–) Ground

Electric Strike
(SD-995C)

TRG
NO COM NC

RELAY