Seco-Larm RM-R100-RB1Q, RM-R100-TBQ, RM-R100-TH2Q, RM-R100-KB1Q, RM-R100-R2Q Specsheet

The Room Occupancy Monitor (ROM) indicates whether room (like a restroom or fitting room) is occupied or vacant.
Use for any place where you want occupancy notification:
Room Occupancy Monitor Room Occupancy Monitor
Fitting Room Application
1-Fitting Room Application
2-Fitting Room
Application*
Room Occupancy Monitor
RM-R100-KB1Q
Features:
Monitor fitting rooms, restrooms, etc.
Increases sales, safety, customer flow, and satisfaction
Reduces crowding, theft, and embarrassing situations
Programmable for PIR sensor (movement), phototransistor (light),
or door sensor input (magnetic contact switch) to detect occupancy
Programmable to flash to alert staff to check on occupant
after a set amount of time
Indicator will flash and beep** if Help Button is pressed
Each sensor can transmit to an unlimited number of indicators
Staff and customers can monitor room occupancy from a distance
Service button available
Easy to install − Micro USB or terminal block (5~12 VDC)
Kit includes Sensor, 1-Room Indicator, Micro USB cables, and decals
Additional accessories available. See back for details
*Two Room Occupancy Monitor Kits required to recreate Illustration **Available on RM-R100-KB1Q only
Multiple Decals Included:
1-Restroom Application*
*Additional One-Room Indicator required to recreate Illustration
2-Restroom Application**
**Two Room Occupancy Monitor Kits and one additional 2-Room Indicator required to recreate Illustration
Ordering Information
1-Room Occupancy Monitor Kit
• Monitor fitting rooms, restrooms, etc.
• Increases sales, safety, customer flow, and satisfaction
• Programmable to use PIR sensor (movement), phototransistor (light), or door sensor input (switch) to detect occupancy
• Indicator will flash and beep if Help Button is pressed
• Each sensor can transmit to an unlimited number of Indicators
• Staff and customers can monitor room from a distance
• Easy to install − Micro USB or terminal block (5~12 VDC)
• Kit includes Sensor, 1-Room Indicator, micro USB cables and decals
1-Room Indicator
RM-R100-RB1Q
• Additonal 1-Room Indicator
Programmable to flash after a
preset time (3, 5, 10, 15, 20, 30 minutes)
Indicator will flash and beep if
Help Button is pressed
Multiple decals included
Micro USB or terminal block
(5~12 VDC)
Multiple decals included. See inside for more info.
RM-R100-TBQ
• Occupant can signal for help without leaving room
• Wall-mount or for desktop use
• Powered by 9VDC battery (included)
• Includes multiple message plates, or you can print your own custom message
Indicator Controller
RM-R100-R2Q RM-R100-TH2Q
• Additonal 2-Room Indicator
• Monitor two rooms (requires additional Room Occupancy Monitor)
Programmable to flash after a
preset time (3, 5, 10, 15, 20, 30 minutes)
Multiple decals included
Micro USB or terminal block
(5~12 VDC)
• Allows for easy resetting of 1-Room Indicators and 2-Room Indicators once Wall-Mount Help Button is used
• Includes Belt Clip
Loading...