SECO-LARM Push-to-Exit Bar SD-961A-36 Product Manual

SECO-LARM

®

Push-to-Exit Bar

SD-961A-36

Designed to allow egress from inside an area
normally locked by an electric lock or
electromagnetic lock, and/or to disarm (shunt)
or trigger an alarm when the door is opened.

Features:

Rugged, heavy-duty construction.
Pushing the bar at any point sends a signal to release

the lock and/or sound an alarm.
For 36 inch doors (actual length is 34.5 inches). Can be

cut to size.
Two built-in non-latching (momentary), dual-contact

--

switches (NO/COM/NC).

5 Amps @ 125VAC.

New!
Easier to Install!

New end caps come off and go on in
seconds.

Now includes complete mounting
hardware for hollow doors.

DIMENSIONS:

Total, including end caps:

1

34

23/4”

(70mm)

219/32”

(66mm)

/2” (876 mm)

Without end caps.

321/4” (819 mm)

213/32” (61mm)

2” (50mm)

Attractive brushed-aluminum bar with black
base and trim.

Includes SECO-LARM SD-969-A18 Armored
Door Cord, and mounting hardware for
mounting on wood or metal doors.

SPECIFICATIONS:

SD-961A-36

Circuit Type
Contact Rating

Size
Weight

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

2 Built-in non-latching (momentary)
N.O. or N.C. Contacts

5 Amps @ 125VAC
For 36” doors. Actual size 34.5”
7 lbs. (3kg)

PushBar_New2.pmd

SECO-LARM® U.S.A., Inc.,

Tel: [phone] (California & International) Fax: [phone] Email: [e-mail] Website: www.seco-larm.com

Copyright ©2005 SECO-LARM U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606 Tel: [phone] (Domestic U.S. & Canada)