Seco-Larm PR-312S-PQ Specsheet
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2014 © SECO-LARM U.S.A., Inc. All rights reserved.
All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: sales@seco-larm.com
PiPR-312S-PQ_141014.docx
Indoor Proximity Card Reader
PR-312S-PQ
Features:
Stand-alone operation
Up to 500 user cards
Up to 5 super user cards, plus 1 master card
10 Cards included (additional cards and keyfobs
available, sold separately in packs of 10)
Output relay for either time (1~60 s) or toggle
Status LEDs for operations and programming
Solid-state lock relay for longer life, lower power
consumption, and shock/vibration resistance
Specifications:
Dimensions and Overview:
The ENFORCER® Indoor Proximity Card Reader is a flexible
solution for securing controlled access. Its stylish case and
small size make it ideal for use in most residential, commercial,
and industrial sites. Simple enough to deploy in small
businesses, it also has the programming capability to meet the
needs of midsize and enterprise companies. Simple installation,
high reliability, attractive design, and scalability are all combined
in the ENFORCER® Indoor Proximity Card Reader.
Model
PR-312S-PQ
Power input
12VDC
Current
draw
Standby
60mA
Active
80mA
Max. read distance
6" (15cm)
User card limit
500 Cards (5 groups @ 100 users)
Super user card limit
5 cards
Master card limit
1 card
Transmit frequency
125kHz (EM125)
Outputs
Lock strike
relay
Fail-safe/fail-secure, 3A@16VDC
(solid-state relay)
Doorbell
relay
N.O. Dry contact, 1A@24VDC
Tamper
switch
N.C. Dry contact, 50mA@16VDC
Relay time delay
Timed output 1~60 s or toggle mode
Temperature
-4°~158° F (-20°~70° C)
Relative humidity
5~95%, non-condensing
IP Rating
IP55
Dimensions
43/4"x23/8"x15/16" (120x60x23 mm)
Front view
Back view (cover removed)
Operation
indicator LEDs
Status LED
(blue)
Card reader
window
Doorbell
button
Door lock
selection jumper
Terminal
block
Tamper
switch
CMC
Jumper
23/8” (60mm)
4
3
/
4
" (120mm)
7
/8”
(23mm)
Front View
Side View
Indoor Proximity Card Reader
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2014 © SECO-LARM U.S.A., Inc. All rights reserved.
All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: sales@seco-larm.com
PiPR-312S-PQ_141014.docx
Sample Application:
( )
1 2 3 4 5 6 7 8 9
10
(+)
(–)
(+)
(–)
EG
IN
DATA
I/O
DOOR BELL
N.O.
TAMPER
N.C.
12VDC
DOOR LOCK
12VDC Power
supply
N.O. Egress button
(inside room)
More N.O. egress
buttons can be
connected in parallel
Electric Lock*
(+)
(–)
(+)
(–)
Cathode
1N4004 Diode
3A
Max
PUSH
TO
EXIT
PUSH
TO
EXIT
LED Indicators:
1. Status indicator (blue LED) – a
steady ON during normal operation,
or flashes while the proximity card
reader is in the programming mode
or in the lock-down mode.
2. Operation indicators (LEDs
numbered 1~5) – show the status of
the proximity card reader while in the
operation mode or in the
programming mode.
While the proximity card reader
is in the operation mode and it
reads a programmed card, the
LED corresponding to that
card’s user group turns to a
steady ON.
While the proximity card reader is
in the programming mode, the
LEDs show the status of the
feature settings.
Front View
Status
indicator
Operation
indicators
Card reader
window
Doorbell
button
Also Available from SECO-LARM®:
PR-K1S1-A
Proximity cards (EM125)
(packs of 10)
PR-K1K1-AQ
Proximity keyfobs (EM125)
(packs of 10)
Loading...