Seco-Larm E-936-S35RRGQ Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA, 92606

Copyright © 2016 SECO-LARM U.S.A, Inc. All rights reserved.

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to

change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PI_E-936-S35RRGQ_161110.docx

Specifications:

Type

Retro-reflective

Sensing Range

0.5~35 ft (0.2~11 m)

Operating Voltage

12~30 VDC/24~30 VAC 60Hz, 83mA

Current Draw

Standby - 60mA@12VDC

Active - 25mA@12VDC

Response Time

10ms (max.)

Light Source

IR LED

LED Indicators

Yellow LED (alignment)

Red LED (power on, triggered off)

Trigger Output

SPDT Relay output

(NO/NC/COM, with built-in 10kΩ

resistor on N.O. output)

Switching Capacity

2A@30VAC/VDC

Enclosure

IP66 Weatherproof

Operating Temperature

-4°~131° F (-20°~55° C)

Mounting brackets

Included

Reflective Photoelectric Beam Sensor

E-936-S35RRGQ

Range up to 35ft (11m)

 Up to 35ft (11m) sensing range
 Weatherproof (IP66) construction for indoor/outdoor usage
 Pre-wired 6-foot cord
 Bracket and mounting hardware included for both sensor

and reflector

 Adjustable sensing range
 Compact size
 Monitored output: N.C. or 10kΩ resistor on N.O. output

Features:

Optional Accessories:

E-931ACC-RC1Q

3” Round reflector

E-931ACC-HR1Q

Reflector hood

E-931ACC-BLS6Q

Single-gang flush-mount bracket

E-931ACC-BLS7Q

L-bracket for side
mounting

E-931ACC-BLS8Q

Wall Bracket

Reflector

Transmitter/Receiver

3

/8″ (10mm)

21/32″

(52mm)

13

/16″

(20mm)

25/8″

(66mm)

13

/16″

(20mm)

19

/32″

(15.1mm)

61/2′ (2m) cable

1

/4″ (6mm) diameter

3

/16″ (4.5mm) thru holes

3

/16″

(5mm)

19/16″

(40mm)

113/16″

(30mm)

25/16″

(58mm)

21/16″

(53mm)

215/32″

(63mm)

Dimensions: