Seco-Larm E-931-S50RRGQ Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA, 92606

Copyright 2016 © SECO-LARM U.S.A, Inc. All rights reserved.

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to

change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PI_E-931-S50RRGQ_160216.docx

50ft Reflective Photoelectric Beam Sensor

E-931-S50RRGQ Range: Up to 50ft (15m)

21/8"

(54mm)

23/8"

(60mm)

115/16"

(49mm)

27/16"

(62mm)

413/16"

(122mm)

Features:

 Up to 50ft (15m) range
 For outdoor gates, garage doors, etc.
 Weatherproof (IP55) construction for

indoor/outdoor use

 Anti-condensation housing
 Dual-color LED alignment system
 Form C relay: 500mA@30VAC/VDC
 Tamper switch: N.C. 500mA@30VAC/VDC
 3

1

/4” (82mm) Round reflector included

 Compact size
 Monitored output:

 N.C.
 10kΩ Resistor

Specifications:

Model

E-931-S50RRGQ

Type

Reflective Photoelectric

Beam Sensor

Sensing range

50ft (15m)

Operating voltage

12-30V DC/AC 60Hz, 100mA

Current
Draw

Standby

55mA@12VDC

Active

40mA@12VDC

Response time

10ms

Light source

IR LED

LED
Solid green

Good beam signal, properly aligned

Alternating flash

Poor beam signal

Solid red

No beam signal, triggered

Trigger output

SPDT Relay output (NO/NC/COM)

Switching capacity

500mA@30VAC/VDC

Tamper switch

500mA@30VAC/VDC

IP Rating

IP55

Operating temperature

-13°~140° F (-25°~60° C)

Dimensions: