Seco-Larm E-931CS22RRCQ Specsheet

16842 Millikan Ave Irvine, CA 92606

Tel: [phone] Fax: [phone]
[e-mail] www.seco-larm.com

Copyright 2012 © SECO-LARM U.S.A, Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

pi-E-931CS22RRCQ.docx

Entry Alert System

E-931CS22RRCQ

Range: 22ft (7m)

Features:

For monitoring an entrance or using an entrance

indicator.

Photoelectric beam sensor.
Makes “ding-dong” or siren sound if beam is

interrupted.

Speaker volume can be adjusted to turned off.
When in siren mode, sounding time is adjustable from

3 to 30 seconds.

9VDC adapter included.
All components plug into each other. No hard wiring

required. 32ft cable from speaker to sensor.

Includes the following:

Retro-reflective photoelectric sensor.
Reflector.
Speaker/electronic chime.
9VDC 200mA power adapter. 6ft cable.

Specifications:

Type

NIR Retro-Reflective Entry Alert System

Sensing Range

22’ (7m)

Supply Voltage

9VDC adapter included

Total Current Draw

100mA max

Standby Current

25mA

Light Source

IR LED

Ambient Temperature

-4°~122° F (-20°~50° C)

Speaker Volume

Adjustable from 0~max

Alarm Time Range

Adjustable 3~30 s for alarm

External Chime Output:

NPN O/P for external device (eg., counter)

Speaker Output

Chime/Off/Alarm (select by switch)

Mounting Brackets

3 included

Dimensions
Sensor

213/16”x23/8”x13/16” (71x60x30 mm)

Speaker

213/16”x27/16”x13/8” (71x62x35 mm)

Reflector

23/8”x2”x5/16” (60x50x8 mm)

Note: To extend the range, use the additional speaker

(E-931ACC-SQ). Use any standard stereo cord with

1/8” stereo plug. If the range exceeds 33ft, a 9VDC

adapter (sold separately) is required.

Wiring:
Accessories:

E-931ACC-SQ

Extra speaker/electronic chime.
Plugs into primary speaker/electronic

chime.

32’ extension cord and mounting

bracket included.

E-931ACC-CQ

Automatically tracks how often the

E-931CS22RRCQ is triggered.

Push buttons to manually add to or

subtract from counter or to reset to zero.

Plugs into speaker – no wiring needed.
32’ extension cable and mounting

bracket included.