Seco-Larm E-931ACC-BLS7Q, E-931ACC-BLS6Q User Manual

E-931ACC-BLS6Q

Flush Mount Bracket

E-931ACC-BLS7Q

Wall Bracket

Compatible with Sensors E-931-S35RRQ and E-931-S45RRQ

Manual

Sensor E-931-S35RRQ Shown

Parts List - Flush Mount Bracket E-931ACC-BLS6Q

1x

Wall Plate

1x

Bracket Screw and Lock Washer

1x

L-Bracket

2x

Wall Plate Screws

STEP 1

STEP 2

Note: Sensor E-931-S45RRQ
uses upper screw opening

Installation Flush Mount Bracket E-931ACC-BLS6Q

Attachment screws, washers,
and nuts included with sensor

ENFORCER Sensor Brackets

Installation for Wall Mount Bracket E-931ACC-BLS7Q

(Sample Installation for Sensor E-931-S45RRQ shown.)

Left-Facing Sensor Orientation

Right-Facing Sensor Orientation

Using sensor supplied bracket E-931ACC-BLS5Q (E-931-S45RRQ only)

Using sensor supplied bracket E-931ACC-BLS1Q

NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the

SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or
in part, without the written permission of SECO-LARM.

WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal

service for 1 (one) year from the date of sale to the original customer.

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Website: www.seco-larm.com

PITSW1

Phone: [phone] | [phone]

Email: [e-mail]

MiE-931ACC-BLSxQ_140814.docx

FIG. 1L

FIG. 1R

FIG. 2L

FIG. 2R

Parts List - Wall Mount Bracket E-931ACC-BLS7Q

1x

Wall Mount Bracket

4x

Spring Lock Washers

4x

Mounting Bolts

8x

Washers

Note sensor
bracket positioning

Order Part# 764-101%

Note: Wall Mount Bracket should be first installed to the wall using four attachment
screws (not included) and facing in the proper direction for the desired left or right­facing orientation before proceeding with attachment of the sensors.

2 SECO-LARM U.S.A., Inc.