Seco-Larm E-921CPQ Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright 2015 © SECO-LARM U.S.A., Inc. All rights reserved.

All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PiE-921CPQ_141210.doc

Voice Dialer

E-921CPQ

Features:

 Trigger-activated alarm and dialer with user-programmable

20-second alarm message.

 16-Digit large display with date/time and function icons
 3 Triggers (1 N.C., 2 NO/NC) for multiple zone security
 Call in at any time to listen in to room, broadcast to room,

arm, and disarm dialer

 Listen in, broadcast messages to room, and/or disarm during

dialer call out

 Programmable PIN number and entry delay timing
 5 Programmable emergency telephone numbers (up to 32

digits each)

 Home mode function (acts as a door chime when user is

home)

 Panic button
 Back-lit keypad
 Built-in flash memory to protect against system data loss in

case of power failure

 9V battery backup (battery not included)
 Low-battery indicator for back up battery
 DC power input jack (power adapter not included)
 Wall mountable
 Built-in 105dB alarm (with programmable alarm on/off)
 Built-in auxiliary output for external alarm or siren
 Built-in line seizure

When triggered by an alarm system, the ENFORCER Voice
Dialer can call up to 5 numbers and deliver a user-recorded 20­second voice message, playing repeatedly for one minute. The
receiver can then listen in or broadcast a message to the room
occupants or can disarm the system. The dialer includes a home
mode (acting like a door chime when the owner is present) and a
panic button. The 105dB built-in siren alarm can be programmed
on or off.

LCD Screen Layout:

LCD Display

LINE Jack

Speaker

REC/ PLAY LED

LOW BATT LED

POWER LED

Numeric Keypad

Microphone

TEL Jack

Buzzer

Terminal Block

DC Power Jack

Battery Receptacle

Reset Button

Armed or
disarmed

Home Mode

Activated

Alarm Triggered
Siren Alarm

Auto Dial

Call-Back

Rings

Time/Date

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright 2015 © SECO-LARM U.S.A., Inc. All rights reserved.

All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PiE-921CPQ_141210.doc

Wiring Diagram:

Specifications:

Operating

voltage 9~12

VDC

Current draw
Max. (at

12VDC)

Standby

5mA

Dialing

20mA

Alarm On

150mA

Relay On

50mA

Speaker On

250mA

Total

480mA

Emergency voice message length (user

recorded)

Up to

20s

Programmable emergency phone

numbers

5

Maximum digits per telephone

number

32

Backup battery type/life (not included)

9VDC/≈20h

Alarm sound level at 12"

(30cm)

≥

105dB

Trigger

inputs

Triggers 1 and 2

NO/NC Trigger

(auto-detected)

Trigger 3

N.C.

Trigger

Trigger input

timer ≥

500ms

Auxiliary output current

(max)

125mA

Operating temperature

32°~104°F (0°~40°C)

Storage

temperature

-4°~140°F

(-20°~60°C)

Weight

11.15-oz

(316g)

Dimensions

611/16"x411/16"x11/2" (170x119x38

mm)

Also available from SECO-LARM:

Door/Window Switches,
Magnetic Contacts, etc.

LED Strobe Light

SL-1301-BAQ

Auto Dialer

E-921APQ

Shock/Vibration Sensor

SS-040Q

Tamper Switch

SS-072Q

Photobeam Sensor

E-931-S35RRQ

LINE TEL

Telephone Wall Jack

+

-

Buzzer (–) O/P

Buzzer (+) O/P

or

Telephone Extension

External Alarm/Siren

CA- 161T
DC Plug-to-Terminal
Block

Power Adapter
(Not Included)

SM-206Q

E-964-D390Q

NO/NC Trigger in 1

NO/NC Trigger in 2

N.C. Trigger in 3

Trigger ground

SM-200Q

Note: For proper operation, the telephone extension
line and wall jack line must not be reversed.