Seco-Larm E-920B Specsheet
Tel: 1-800-662-0800 (Domestic U.S. & Canada) Email: info@seco-larm.com Website: www.seco-larm.com
16842 Millikan Avenue, Irvine CA 92606 Tel: 1-949-261-2999 (California and International) Fax: 1-949-261-7326
pi-E-920B.docx
Copyright© 2009 SECO-LARM U.S.A., Inc. All rights Reserved.
The SECO-LARM policy is one of continual development. For that reason SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Voice Dialer
E-920B
Specifications:
Features:
Automatically dials up to four telephone numbers and
delivers up to two different messages when triggered by
an alarm system.
Operating voltage
12VDC
Current Draw
20mA (standby)
60mA (operate)
250mA (siren active)
Trigger Inputs
2 NO/NC
Operating Temperature
-4° ~122°F (-20 ~50°C)
Backup Battery
9VDC (not included)
# of Tel. Numbers
Up to 4
Max. Digits per Tel. #
32
Case Material
ABS plastic
Weight
11-oz (320g)
Dimensions
57/8” x 4” x 11/2”
(148 x 100 x 39 mm)
Easily connects to an alarm panel and automatically dials
out when activated.
2 independent voice messages. Stores up to 4 telephone
numbers, cellular numbers, or pager numbers.
Delivers a message of up to 16 seconds to each number
stored.
Instant trigger or exit and entry delay settings.
Repeats the voice message for one minute per call.
Waits 8 to 10 rings before dialing the next
programmed number
Calls two times when there is no answer or three times
when the line is busy.
EEPROM retains memory if power is lost for up to one year.
Optional 9-Volt internal battery provides stand-by power for
approximately two to three days.
Use worldwide because of Universal Dial Tone.
Use with PBX or regular telephone systems.
2 NO/NC trigger inputs.
Controls:
A. DC adapter jack
B. Siren output jack
C. Sensor input connector
D. Telephone line connector
E. Speaker
F. 9VDC battery compartment
G. Microphone
H. Dial keys
I. Power switch
J. LCD display
K. MODE button
L. MEMORY button
M. VOICE button
N. DIP switches
Loading...