Seco-Larm DP-236Q Specsheet

SECO-LARM
®
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2014 © SECO-LARM U.S.A, Inc. All rights reserved. The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: sales@seco-larm.com
Pi_DP-236Q_1403.docx
Wireless Video Door Phone
DP-236Q
Features:
Talk with visitors and unlock doors or gates via the monitor Handheld monitor’s rechargeable battery allows convenient
communication with visitors while moving around the premises
Wide 3
3
/8” monitor screen for enhanced viewing
Connect up to two additional monitors (sold separately) Includes a kickstand and charging base for the monitor Egress input allows the door phone to be connected with a
Request-to-Exit Plate or other egress device
9~16 VAC/VDC Operation – connects to most doorbell circuits Wide 120° camera viewing angle Camera’s built-in PIR sensor takes photos of approaching visitors Up to 100 images can be stored in memory Camera has built-in LEDs for nighttime operation Camera is IP55 rated for outdoor use Tamper switch triggers alarm if camera is removed from its base Four programmable doorbell tones
Introducing the ENFORCER® Wireless Video Door Phone: the handheld home entry solution. Observe visitors on the large 33/8” screen as they arrive, communicate with them, take photos for later viewing, and unlock a gate to grant entry – all from the wireless monitor. Use up to three monitors for viewing anywhere
in the home. And with the camera’s wide 120° viewing angle, you don’t have to compromise on convenience or security.
Specifications:
Camera
Type
Color Camera
Chip
CMOS
Resolution
480 TV Lines
Lens
2mm
Viewing angle
120°
Operating voltage
9~16 VAC/VDC
Relock delay
1~6 s
Relay output
3A@250VAC/30VDC
Current draw
Active
200mA@4.2VDC
Standby
3mA@4.2VDC
Battery life
Active
3 Hours
Standby
300 Hours (12.5 days)
PIR Detection range
9’ (3m)
PIR Detection angle
138°
Dimensions
511/16”x31/8”x23/8” (144x80x60 mm) with bracket
Weight
4.3-oz (122g)
Operating temperature
14°~122° F (-10°~50° C)
Monitor
Display
33/8” (86mm) TFT
Operating voltage
5VDC (Battery)
Current draw
Active
220mA@4.2VDC
Standby
3mA@4.2VDC
Battery life
Active
3 Hours
Standby
500 Hours (20 days)
Operating frequency
2.4GHz
Wireless range
492’ (150m)*
Dimensions
5”x33/8”x7/8” (127x85x22 mm)
Weight
3.9-oz (110g)
Operating temperature
32°~104° F (0°~40° C)
1 Camera, 3 Monitors
Pair up to three monitors with one camera
Unlocks Doors
Allows access remotely via the monitor
Wireless Operation
Range: Up to 492ft (150m)*
*Line-of-sight range. Actual range may vary depending on the installation and operating environment.
Wireless Video Door Phone
SECO-LARM
®
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2014 © SECO-LARM U.S.A, Inc. All rights reserved. The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: sales@seco-larm.com
Pi_DP-236Q_1403.docx
DP-236-MQ
Additional Monitor
DP-236-BQ
Replacement battery
Optional Accessories:
Sample Connector Wiring:
Positive (+) (red wire)
Negative (-) (black wire)
COM
PUSH
TO
EXIT
1 2 3 4 5 6
N.C.
N.O.
Request-to-exit plate
Fail-secure electric strike
Electric strike power supply
Egress input (N.O., -)
To the included AC adapter or the doorbell’s transformer
(-)
(+)
Camera
Camera
Overview:
Monitor
Status LED
Up
Down/Gallery
Charging indicator light
View
Photo/ Settings
Microphone
33/8” (86mm)
Talk
33/8” (85mm)
Front
Volume buttons
5”
(127mm)
7
/8” (22mm)
Left
PIR Sensor
Speaker
Microphone Doorbell
Status LED
IR LEDs Camera
31/8” (80mm)
511/16”
(144mm)
Front
Side
23/8”
(60mm)
ON/OFF Button:
Turn monitor
ON/OFF
Standby mode Unlock door
USB Connector (Mini-B)
Right
rReset
Wiring connections
Reset button
Battery cover
Back
Loading...