Sears 29033,07-1582-S Assembly Instructions Manual
CUSTOMER S E RVICE INFORMATIO N
Victory Land Group, Inc
1350 Munger Rd
Bartlett, IL 60103
WEB: http://www.victorylandgroup.com
PHONE: 1-800-933-0527
FAX: 1-630-540-7099
8:30 am to 5:00 pm CST, Mon. thru Fri.
EMAIL: help@victorylandgroup.com
ASSEMBLY INSTRUCTIONS
24IN Padded Saddle Stool
Sears Stock # 29033 VL Stock #07-1582-S
Please do not return to the store. Contact VLG using the below information
should you need to order any missing or replacement hardware.
1. Use the long end of the allen wrench to fasten allen bolts loosely and quickly.
2. Use the short end of the allen wrench for final tightening.
The wood glue is used to secure the wood dowels to various
wood parts during assembly. Please use caution, and follow the
instructions below, when attaching the dowels into the holes:
a. Fill hole with wood glue approx 1/4 full.
b. Slowly push dowel into the hole.
c. Wipe away any excess wood glue.
1
2
1
2
3
Please make sure you have all parts before beginning assembly. Please wait until all steps
are completed before tightening bolts.
GENER AL I N F OR M AT I ON &TIPS
MAXIMUM R EC O MM E ND E D W E IGH T CAPAC I TY
A Phillips head screwdriver is necessary for assembly. It’s not
included in hardware list.
1. Maximum weight capacity per stool is 250 pounds.
1. Please read the assembly instructions prior to assembling the chair.
2. To avoid damage, assemble the chair on a non-abrasive surface such as carpet.
3. Make sure all bolts are tightly fastened before the chair is used.
4. This chair is not for commercial use.
! WARNING: After a few days of initial assembly and chairs have acclimated
to new environment, retighten all hardware. Periodically check
and retighten the screws every few months.
1 | Pa g e
Loading...