Sears 274.4372859 User Manual

_A/,_
OWNER'S MANUAL
MODEL NO.
274.43728590 SERIES
Record the Model No. and the Serial No. of your television in
Model No.
O oo'oOo
J
SEARS
27" TABLETOP
COLOR TELEVISION
Serial No.
Keep this information for
future use.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
WITH REMOTE CONTROL
Safety Information
Use
Warranty and Service
Important Information
WARNING
To reduce the risk of fire or
shock hazard, do not expose this TV to rain or moisture.
Cautions
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
RISK L)F ELECIHIG SHOCK
DO NOT OPEN
_k This symbol indicates _ This symbol indicates
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour 6viter les chocs 61ectriques, introduire la lame la plus large de la
fiche dans la borne correspondante de la prise et pousser jusqfi au fond.
Operate TV only on 120 volts, 60 Hz AC power (normal house power). FCC Regulations state that unauthorized changes or modifications to this
equipment may void the user's authority to operate it.
"dangerous voltage" inside _ important instructions
the product that presents a accompanying the risk of electric shock or product.
personal injury.
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
Note To Cable TV Installer
This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code,
Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
Table of Contents
Important Information Warning, Important Information .... i
Quick Guide to Your TV
Using Your TV and Remote
Adjusting Your TV
Startup 2-3
Hook up your TV, Plug in the TV, Put Batteries in the Remote, Turn on the TV, Place Channels into Memory, Set the Time
Basic Tour of the Remote 4
Button Layout and Functions
Menu Basics 5
Colors, Menu Buttons, Moving through the Menus
With Remote Buttons With VCRs With a Satellite Receiver With a Cable Box
With a Laserdisc Player With Audio Equipment
Overall Picture 16
Picture Settings 17
Color, Tint, Brightness, Sharpness, Autocolor, Picture Reset
Sound Settings 18
Stereo, Tone
6-7
8-10
12-13
14 15
11
Using Advanced Features
Placing Channels in Memory/AutoProgram Naming the Channels Setting the Sleep Timer
Setting the Alarm Clock Watching Closed Captioning
Setting Your TV for Antenna or Cable
References Front Panel Buttons
Displays on the Screen Trouble Checks
Index Limited Warranty
19 20 21 22 23 24
25 26
27-28
29
Back Cover
Quick Guide to Your TV
Startup
The steps below will get your TV connected and ready for watching.
For more details, see the page numbers listed.
1. Hook up your TV
Details are in the Connections Guide.
Hook up any antennas, cables or other equipment to your TV before you follow the steps below.
CONNECTIONS
GUIDE
2. Plug in the TV
3. Put Batteries in the Remote
Plug the cord into the outlet, matching the wide and the small end of the plug with the outlet.
A. Pull off the cover of the battery
compartment.
B. Place the four AAA batteries as
shown, matching the 4- and - end of each battery in the
compartment.
C. Replace the cover.
Quick Guide to Your TV
Startup
4. Turn on the TV
'O 20 30
'0 _0 '0 'O "0 '0
_ °O %"
g, g
/x
q.°-b
Press TV on the remote.
OR
Press POWER on the TV.
5. Place all available channels in memory
(Autoprogram)
Details for adding and deleting channels are on page 19.
6. Set the Time
12:21 AM 13
A.
Press MENU,PROG until the Setup menu is selected. This
menu is white.
B.
Press MOVE to highlight
Autoprogram.
C.
Press MOVE to start placing
channels in the TV's memory.
D,
Wait until TV has cycled through all the channels and returns to original channel.
A. Press MENU,PROG until the
Alarm menu is selected. This
menu is green.
B. The Clock is automatically
highlighted the first time you set it. If it is not, press MOVE to highlight it.
C. Press MOVE to set the hour. D. Press MOVE to set the
minutes.
Quick Guide to Your TV
Basic Tour of the Remote
Basic information about your remote is shown below. This will give you a general idea of how your remote works. For more details, see pages 6-15.
TV Power Button
Volume and Channel Controls
Details are on page 7.
rlUl'IIStile 1 V on. Sets the remote to control thu IV.
Operates TV when remote is set to control the TV.
Operates the TV and advanced features.
Component Buttons
Details are on pages 8-15.
Menu Buttons
Details are on page 5.
Controls components such as a VCR, laserdisc player, audio equipment, satellite receiver and a
cable box.
Changes the menus and features on the screen.
4
Quick Guide to Your TV
Menu Basics
General information about using the on-screen menu system is shown
below. Details on using the remote buttons are on pages 6-7. Many menu items
are explained in detail in Using the Advanced Features starting on page 19.
Colors
Menu Buttons
The menu buttons are used to
adjust the features in the TV's menus. Both the menu buttons on
the remote or the front of the TV will move through the menus. See
"Moving through the Menus" below.
Yellow Green Light White
1 IBie!
Controls Alarm
._w _v n
R_c sr_ P,us,
r--_ r--_ r_l
o /_._x .....
'O 20 30 "O _O 60
'O 80 90
'_' °O "5"
Press MENU.PROG repeatedly to see each of the four menu colors.
Each menu has a different color background as shown at the left.
Moving through the Menus
A
"V
_Controls Alarm Ad
1. Press MENU'PROG on the remote or MENU on the front
panel to move from menu to
menu.
2. Press MOVE and on the
remote or CHANNEL up or down on the front panel to
move up and down through the features in the menu.
3. Press MOVE and I_ on the
remote or VOLUME + or - on the front panel to move left and
right on the menu lines.
5
Using Your TV and Remote
With Remote Buttons
O_Nf-R VCR1 SAT'CABtE TV
VCR2*LD AUDIO
O0
REW PLAY FF
<21 E>
REC STOP PAUSE
DISPLAY SKIP
MUTE CHA_ PREV CH
4 0 50 6 0
INPUTQ 0 O ANTENNAo
CLEAR ._ ,o_ RESET
POWER
Turns off the TV. Turns off compatible VCRs.
Turns on a component after a component button is pressed.
AUDIO, VCR1, VCR2.LD,
SAT.CABLE, TV
Sets the remote to control the
component. VCR2. LD can only be programmed for one component:
either a VCR or a Laserdisc Player.
See Using the Remote with a VCR, Satellite Receiver, Cable Box, Laserdisc
Player and Audio equipment on pages 8-15.
TV
Turns on the TV. Shows the displays on the screen.
Sets the remote to control the TV.
See Using the Remote with a VCR, Satellite Receiver, Cable Box, Laserdisc
Player and Audio equipment on
pages 8-15.
REC (Record)
Starts recording onto tape.
STOP
Stops tape or laserdisc.
PAUSE
Pauses tape or laserdisc.
DISPLAY
Shows displays on the screen. Clears menus from the screen.
SKIP (Commercial Skip)
Allows you to scan other
channels during commercials. Each press adds 30 seconds. TV
switches back to original channel
when time runs out. Press
CLEAR to cancel SKIP.
CHAN/_ and v (Channel up and down)
Scans up and down through
channels in the TV's memory. Moves through channels
in VCR's memory.
REW (Rewind) Rewinds a tape or laserdisc.
Searches backward while tape or laserdisc is playing.
PLAY
Plays tape or laserdisc.
FF (Fast Forward)
Fast forwards a tape or laserdisc. Searches forward while tape or
laserdisc is playing.
VOL > and < (Volume up and down)
Raises and lowers sound.
MUTE
Switches the TV sound on or off.
PREV CH (Previous Channel)
Changes back and forth between two channels.
Select a channel and then select another. Press PREV CH to
switch between the two channels.
Using Your TV and Remote
With Remote Buttons
10 2 0 30
4 0 5 0 60
INPUTo 0 0 ANTENNAo
Number Buttons (0-g)
Selects any channel number.
Two numbers must be pressed for each channel. Press 0 and 6 for
channel 6. For three digit channels, press and hold I until 1-- appears on the screen. Then press
the other two numbers.
INPUT
Switches between the TV channels
and Video 00.
ANTENNA Used as TV/VCR button when
remote is set to control the VCR.
CLEAR
Clears menus and displays from the screen.
Clears items from VCR timer programs and VCR's clock.
MENUoPROG (Program)
Shows menus on the screen and moves from menu to menu.
Sets VCR clock and programs timer on VCR.
RESET Returns the picture adjustments to
the original settings.
MOVE and I_ (left and right)
Moves left and right on a menu line. See Menu Basics on page 5.
Changes a feature setting.
MOVE and (up and down)
Moves up and down menus. See
Menu Basics on page 5.
_IbCLEAR O_OQ RESE_II_
Using Your TV and Remote
With VCRs: Programming the Remote
Refer to the Connection Book or the VCR's owners manual to hook up your VCRs.
The remote may need to be programmed for your VCR, but may not
operate all models of the brands listed below. Use the codes below or on the sheet packed in with your remote.
1. Test the remote
_tl vcR1SAtoCae_Erv
vRo A p
</1 I>. _
A. Press VCR1 or VGR2oLD to turn
the VCR on.
B. Press the VCR buttons shown at
the left. If your VCR does not work, program VGR1 or
VCR2oLD with a VCR code from the list below.
2. Program the remote for your VCRs
VCR Codes
Aiwa ................................................. 15
Akai ......................... 03,17,22,23,63,66
Audio Dynamics ........................ 14,16
Broksonic ......................................... 10
Candle .....................07,0%13,44,45,52
Canon .......................................... 08,53
Capehart ........................................... 01
Citizen ................ 07,09,13,44,45,46,52
Colortyme ........................................14
Craig ............................................ 07,12
Curtis Mathes ............. 00,07,08,14,15,
....................................... 44,45,53,64,67
Daewoo ............................. 13,45,52,76
dbx ............................................... 14,16
Dynatech .......................................... 15
Electrohome ..................................... 27
Emerson ............ 08,09,10,13,15,20,23,
....................................... 27,34,41,42,47
Fisher .................. 02,12,18,19,43,48,58
Funai ................................................. 15
GE ................................. 00,07,08,32,37
Goldstar ............................. 09,14,46,60
Harman Kardon .............................. 14
Hitachi ............................... 05,15,35,36
Instant Replay ................................. 08
JCL .................................................... 08
JCPenney ................ 02,05,07,08,14,16,
............................................ 30,35,51,53
JVC........................... 02,14,16,30,46,74
MU_E r_A_ _eVC.
'O 20 30 40 _O 60
70 80 90
'_' 00 %"
4_
Kenwood ................. 02,14,16,30,46,47
KLH .................................................. 73
Lloyd's .............................................. 15
Logik ................................................. 31
Magnavox ......................... 08,29,53,56
Marantz ....02,08,14,16,29,30,44,46,61
Marta ................................................ 09
MEI ................................................... 08
Memorex ........................... 08,09,12,15
MGA ............................................ 04,27
Midland ............................................ 32
Minolta ........................................ 05,35
Mitsubishi .................... 04,05,27,35,40
Montgomery Ward ......................... 06
MTC ............................................. 07,15
Multitech ........................... 07,15,31,32
NEC .......... 02,14,16,30,44,46,59,61,64
Panasonic ............................... 08,53,75
Pentax ..................................... 05,35,44
Pentax Resear .................................. 46
Philco ................................. 08,29,35,56
Philips .......................................... 08,29
Pioneer ................................... 05,16,33
Portland .................................. 44,45,52
ProScan ............................................. 00
Quartz ............................................... 02
Quasar ......................................... 08,53
RCA .......... 00,05,07,08,28,35,37,54,69
Radio Shack ....... 02,06,08,09,12,15,19
A. Point the remote at the VCR
and hold VGR1 or VCR2oLD.
B. Enter the code for your brand
from the code list below.
C. Release VCR1 or VCR2°LD. D. Press POWER. If nothing
happens, try pressing VCR1 and then POWER.
E. Repeat A-D with another code
if the first one does not work or
if a second VCR is connected.
................................................. 27,43,53
Samsung .................. 07,13,22,32,42,48
Sansui .......................................... 16,71
Sanyo ........................................... 02,12
Scott .............................. 04,13,41,49,68
Sears ............... 02,05,09,12,18,19,35,43
Sharp ............................. 06,24,27,39,45
Shintom ............................. 17,26,31,55
Sony ........................................ 17,26,38
Sylvania ........................ 08,15,29,53,56
Symphonic ....................................... 15
Tandy .......................................... 02,15
Tashiko ............................................. 09
Tatung .............................................. 30
Teac .............................................. 15,30
Technics ............................................ 08
Teknika .............................. 08,09,15,21
Toshiba ......................... 05,13,19,48,49
Totevision ................................... 07,09
TMK .................................................. 67
Unitech ............................................. 07
Vector Research .................... 14,16,44
Victor ................................................ 16
Video Concepts ..................... 14,16,44
Videosonic ....................................... 07
Wards ............ 05,06,07,08,0912,13,15,
................................................. 25,31,35
Yamaha ....................... 02,14,16,30,46
Zenith ............................... 11,17,26,72
Loading...
+ 22 hidden pages