Sears 20047006 Owner’s Manual

SEA/RS

OWNER'S

MANUAL

Model No.

47006

CAUTION:

Read and Follow All Safety Rules and Operating Instructions

Before Every Use of this Product.

Sears Canada Inc., 222 Jarvis St., Toronto, Ontario, Canada M5B 2B8

40/2 AMP

MANUAL BATTERY

CHARGER

200 AMP

ENGINE STARTER

Table Of Contents

Warranty .................................................................. 1

Important Safety Instructions .................................. 2

Parts ......................................................................... 3

Before Using Your BaRery Charger ........................ 4

Assembling your charger ....................................... 4

Plugging it in .......................................................... 5

Using an extension cord ........................................ 6

Preparing your battery to be charged .................... 6

The Sears model 47006, Manual Battery Charger/Engine Starter, offers a wide range of features to accommodate the needs for home or commercial use. This manual will show you how to use your charger

r Please read this Owner's Manual before using your Battery Charger

safely and effectively. Please read and follow these instructions and precautions carefully.

Using Your Battery Charger .................................... 7

Setting the controls ................................................ 7

Charging your battery ............................................ 8

Calculating charge time ....................................... 10

Using the engine start feature .............................. 11

Maintenance and care ......................................... 11

Troubleshooting ..................................................... 12

Warranty

FULL THREE-YEAR WARRANTY

if, within three years from the date of purchase this battery charger fails due to a defect in materials or work- manship, simply RETURN IT TO THE NEAREST SEARS STORE IN CANADA, and Sears will replace it, free

of charge. This warranty gives you specific legal rights, and you may also have other rights which vary from province to

province. Sears Canada, Inc.

Toronto, Ontario, M5B 2B8

Important Safety Instructions

- SAVE THESE INSTRUCTIONS -

• Read all instructions and cautions printed on the

battery charger, battery, and vehicle or equipment using battery.

• Use charger only on lead-acid type rechargeable batteries, such as those used in cars, trucks, trac-

tors, airplanes, vans, RV's, trolling motors, etc. This charger is not intended to supply power to

a low voltage electrical system other than in an

automotive application.

•Use only attachments recommended or sold by manufacturer. The use of attachments not recom-

mended by the manufacturer may result in fire,

electric shock, or injury.

Help us help you

Remember:

• Place charger as far away from battery being charged as the charger cables will permit.

• Do not expose charger to rain or snow.

• Never charge a frozen battery. If battery fluid (electro-

lyte) becomes frozen, bring battery into a warm area

to thaw before you begin charging.

• Never allow battery acid to drip on charger when reading specific gravity or filling battery.

• Never set a battery on top of the charger.

• Never place charger directly above battery being charged. The gases from the battery will corrode

and damage the charger.

• Never use charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and cause personal injury.

•Do not disassemble charger. Take it to a qualified service professional if service or repair is required.

Incorrect assembly may result in fire or electrical shock.

• To reduce risk of electrical shock, unplug the charger from the outlet before attempting any

maintenance or cleaning.

• Al__ys charge battery in a well ventilated area.

• Never touch the battery clamps together when the charger is energized.

• Never operate charger if it has received a hard blow, been dropped, or otherwise damaged. Take it to a

qualified professional for inspection and repair.

• Be sure to position the charger power cord to prevent itfrom being stepped on, tripped over, or

damaged.

• Never pull out the plug by the cord when unplug-

ging the charger. Pulling on the cord may cause damage to the cord or the plug.

• Do not operate the charger if it has a damaged

power cord or plug. Have the cord replaced.

Personal Safety Precautions For your own personal safety, please follow the follow-

ing precautions:

•Wear complete eye and clothing protection when

working with lead-acid batteries

• Be sure that someone iswithin range of your voice to come to your aid if needed while you work with or

are near a lead-acid battery

• Have plenty of fresh water and soap nearby for use in case battery acid contacts your eyes, skin, or cloth- ing. If this happens, wash immediately with soap and water. Then get medical attention.

• Avoid touching your eyes while working with a battery. Acid particles (corrosion) may get into your

eyes. Ifthis occurs, flush eyes immediately with running cold water for at least 10 minutes. Then immediately get medical attention

• Remove all personal metal items from your body, such as rings, bracelets, necklaces, and watches

while working with a lead-acid battery A battery can

produce a short circuit current high enough to weld

a ring (or the like) to metal, causing a severe burn.

•Take care not to drop any metal tool or metal object onto the battery. This may spark or short circuit the

battery or another electrical device that may cause

an explosion.

•Always operate your battery charger in an open, well ventilated area

• Never smoke or allow a spark or flame inthe vicinity of the battery or engine Batteries generate explosive gases.

• Neutralize any acid spills thoroughly with baking soda before attempting to clean up.

Parts

This section shows an illustration of your battery charger. Use it to become familiar with where all the parts are

located, and what they look like.

Replacement Parts Ust Sears 47006

Item Description Part Number

1 Handle 3599000286

2 Negative (BLK} cable w/clamps 3899000396 3 Positive (RED) cable w/clamps 3899000410

4 Power Cord 90026096 5 Circuit Breaker Asm 3999000057

6 Rectifier Assembly 2299000614 7 Transformer 93026365

8 Owner's Manual (not shown) 0000000552 9 Wheel 0099000080

10 Hub Cap 5200000008 11 Axle 0099000060

12 Axle mtg. bracket 1199004366 13 Mountin_ Foot 1199003352

14 Rocker Switch 3 pos. 0499000052 15 Ammeter 5399100097 16 Rocker Switch 2 pos. 0499000050

Wiring diagram

Before Using Your Battery Charger

It is important to prepare your charger for use. This section will tell you how to assemble the charger, ground

and connect the power cord, and prepare to charge a battery.

Assembling your charger

it is important to fully assemble your charger before use. Follow these instructions for easy assembly.

PARTS: Two 10-32 thread cutting

screws

Two 1/4-20 thread cutting

screws (for wheels)

Two wheels Hammer

One axle Phillips screwdriver

Two axle caps Two axle brackets

One handle

One mounting foot

To attach the axle assembly:

1. Remove charger from packing materials and place upside down on a flat surface. Attach mounting foot

and secure with the two 1/4-20 thread cutting screws.

TOOLS NEEDED: 3/8" wrench

(for mounting foot)

5/16" wrench

2. Hold axle upright on floor or work surface. Then, using a hammer, tap one of the plastic hubs onto

the top end of the axle. Be sure to tap the hub on

straight. Slide both wheels onto the axle with the hubs facing inward.

I m

continued on next page

+ 9 hidden pages