Sears 175.867029 User Manual

SEARS

OWNERS

MANUAL

HOME

CLEANING

SYSTEM

MODEL NO.

175.8670290

CAUTION:

Read Instructions

and Rules for

Kenmore

Safe Operation

Carefully

HOME CLEANING. SYSTEM

For Household

Use Only

Save this

Manual for

Future Reference

SEARS, ROEBUCK AND CO., Dept. D/731 CR-W, Sears Tower, Chicago, IL 60684

661654-146 (06SO) Rev. 10Ooo) _]NTED IN U.S.A,

, INTRODUCTION

• ASSEMBLY

• OPERATION

• MAINTENANCE

• REPAIR PARTS

IMPORTANT SAFETY INSTRUCTIONS --Readallinstructions before usingthiscleaner.

When using any electri_l appliance, basic precautions should always be followed, including the following:

WARNING -To reduce the risk of fire, electric shock, or injury:

1. Do not leave cleaner when plugged into electrical outlet. Unplug from outlet when notin use and before servicing.

2. WARNING" TO AVOID ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN -- STORE INDOORS.

3. WARNING: DO NOT REMOVE GROUNDING PRONG FROM POWER CORD PLUG. Connect to a properfy grounded outlet ONLY. See Grounding Instructions.

GROUNDING iNSTRUCTIONS:

Thisvacuumcleanermustbegrounded.Ifit shouldrnal[uncf_0nor breakdown,groundingprovidesa pathof lea,stresistancefor

electxicalcurrentton_:lucetheriskofelectricshock.Thisvacuum cleanerisequipl:_lwithacordhavingan equipment-grounding

conductorandgroundingi_ug.The plugmustbepluggedintoan

appropdareoutletthatispmberlyinstalledandgroundedinaccor- dancewi_ alllocalocdesandordinances.

WARNING:improperconnectionoftheequiprrent<jmuntlingcon- ductorcanresultina riskofelecl_icshock.Checkwitha quaJified

electddanorservicepersonif youareindoubtas to whaler the 0utietispmperlygrounded.DONOTmodifytheplugprovidedwith

thevacuumcleaner-- ifitwillnotlittheoutlet,haveaproperou_et installedbya qualifiedalectridan+

ThisVACUUmcleanerisforu_=ona nominal120-v01tcircuit,And hasagroundedplug(seeIigureA).Atemporaryadapter(seetigure

B)maybeusedtoconnecthis plugto a 2-polereceptacle(see figure13)ifaprobedygroundedoutletisnotavailable,Thetempo-

raryadaptershouldbeusedonlyuntilaproperlygroundedoutlet(sse figureA) can be installedbya qualifiedelectrician.The tab for

gmundlngscrew(seefigureB)extendingfromthe adaptermustbe connectedtoapermanentgroundsuchasapmperiygroundedoutlet boxcover.Whenevertheadap_risinuse,itmustbeheldinplace

bya metalscrew(seeRgurea),

ADAPTER

I sca

GROUNDED GROUNOED

PLUG OUTLET

Fiqure A

TABFOR

GROUNDING 2-POLE

SCREW RECEPTACLE

Figure B

4. D_S_NNE_T P_WER C_RD FR_M ELECTR_AL _UTLET bef_re the recov_ryt_nk isemptied_the s_uti_n tank is refilled, or the cleaner is serviced inany way,

DO NOT store this cleaner inan area which may reach freezing temperatures. Should this occur, DO NOT operate

this cleaner until ithas been at room temperature for at least two (2) hours.

6. DO NOT use any cleaning solution or chemicals otherthan those discussed inthis manual.

7. For maximum efficiency, empty container frequently and keep inside of hose, wands, nozzle and container clean.

8. DO NOT overwet carpet or upholstery. If three or more cleaning strokes are required, let the carpet or upholstery

material dry and then repeat cleaning process.

9. D_n_ta___wchi_drent__peretec_eaner_n_rsh_uidtheyp_aywithc_eaneresat_y_C__seattenti_nisneceasarywhen

used around or near children.

10, Use this cleaner ONLY for its intended use as described in this manual. Use only the attachments recommended in

this manual.

11. Always turn cleaner OFF when connecting or disconnectingthe Spraymate motorized nozzle.

12. Do not use with damaged cord or plug. If cleaner is not workingproperly, has been dropped, damaged, left outdoors, or dropped into water, return itto a Sears Service Center.

13. Do not pull or carry by cord, nor use cord as a handle, norclose a door on cord, nor pull cord around sharp edges or comers. Do not run cleaner over cord. Keep away from heated surfaces.

14. Do not unplug from electrical outlet by pulling on the cord.To unplug, grasp the plug, not the cord. and pull.

15. Do not handle plug or cleaner with wet hands.

16. Do not put any objects inventilation openings. Do not use with any opening blocked; keep openings free of dust, lint,

hair, and anything that may reduce air flow.

17. Keep hair, loose clothing, fingers, and all parts ofthe body away from openings and moving parts.

18. NEVER vacuum materials such as hot coals, cigareffe butts, matches, etc.

!9. When "dry" vacuuming do not us_ without filter in p_aca.

20. Turn off all controls before unphl_.;ing.

21. Use extra care when using on stairs.

22. Do not use to pick up flammable or combustible liquidssuch as gasoline or use in areas where such liquids may be

present_

-- SAV E.THESE iNSTRUCTIONS --

TABLE OF CONTENTS

Safety Instructions ..................................................... page 2

Warranty .................................................................... page 3

introduction ................................................................ page 3

Assembly ...................................................................page 4

Operation................................................................page 5-8

Additional Uses I Optional Accea,.,_ories.................. page 8-g

Trouble Shooting Chart ........................................... page 10

,_xploded Views and Parts Lists ........................ page 11-15

Ordering Parts ......................................................... page 16

FULL ONE YEAR_WA IRANTY

When used for private household purposes, if withinone year from the date of purchase, this vacuum cleaner failsdue to a

' defect in matehaJ or workmanship, RETURN IT TO THE NEAREST SEARS SERVICE CENTER/DEPARTMENT IN THE

UNITED STATES, and Sears wig repair it, free of charge. Ifthis vacuum cleaner is used for commercial or rental purposes, the above warranty coverage applies for only 90 days from

the date of purchase.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

• _ :: i H

SEARS, ROEBUCK AND CO., D/731CR-W, SEARS TOWER, CHICAGO, IL 60684

INTRODUCTION

Yournew Kenmore Home Cleaning System isa deluxe highperformance cleaner, designed fortoday's cleaning rsq uirements. With proper care and maintenance, itshould provide you with years of service. It is important that you read this rl_nual to

fully under6-1andthe cleaner's capabilities as well as providing you with the essentials regarding maintenance and safety. A

complete listof operating parts and features is shown in figure 1 below,

RECOVERY TANK

POWER HEAD

RECOVERYTANK

SOLUTION TANK

ANGLED WAND

POWER SWITCH

WANDS

VACUUM HOSE

FLOOR NO._-_LE

SOLUTION TUBING

_[g,I

ASSEMBLY

ASSEMBLY OF RECOVERY TANK

AND SOLUTION TANK

See Figure 2

1. Place Recovery Tank into Solution Tank (align the

word "VACUUM" on Recovery Tank with =VACUUM" on Solution Tank) and secure with Metal Latch.

2, Insert the plugonthe Short Cord from the Solution Tank

intothe Recovery Tank Power Head.

ASSEMBLY OF HOSE, WANDS,

NOZZLE AND SOLUTION TUBING

See Figure I

1. Assemble the two Straight Wands.

2. Assemblethe upper Straight Wand tothe AngledWand of the Hose.

3. Assemble the Floor Nozzle to the lower Straight Wand,

NOTE: Be sure locking button engages properly when

assembling straight wands, angled wand, and floor

nozzle.

4, Push the Solution Tube Quick-Disconne= Nut onto

Tdgger Valve. Twist clockwise to lock. See DETAIL ",4"

-Fig. 3.

5. Snap Solution Tubing into Retaining Clips on the Angled Wand and Straight Wands. Connect other end

of Tubing to Carpet Tool,

6. Attach the Vacuum Hose to Recovery Tank inlet

(Vacuum Inlet).

7. Insert the Plastic Insert of the Solution Tubing intothe Coupling of the Solution Tank. See DETAIL "B"o Fig. 3.

NOTE: To remove the Plastic Insert depress the Tab

and gently pull on the Plastic Insert. Be careful to pull onthe Plastic Insertand not theTubing as damage may

occur.

PLUG

SHORT

CORDIN

HERE

SHORT

CORD

POWER

EAD

RECOVERY

TANK

METAL LATCH

TANK

Fig. 2

RETAINING

CLIP

PLASTIC INSERT

COUPLING

INLET

VACUUM

HOSE

TAB

DETAIL "B" Fig, 3

OPERATION

CARPET PREPARATION

For best results prepare carpet for cleaning as follows:

1. Vacuum carpet 11oremove loose dirt before using Cleaner.

2. To remove stains and ground in dirt present in heavy traffic areas of the carpet, spray or rub Sears Heavy Traffic Pro-

Treatment (82833) into carpet before u_ing Cleaner. Follow directions on the bottle.

FILLING CLEANER WITH WATER AND CLEANING SOLUTION

See Figure 4

1, Open I'_1ofthe Filler Opening,

2. Add Seam AH In One Carpet Cleaner (82813) solution or

Sears Upholstery Cleaner (82843) solution to SolutionTank

(depending on type of cleaning to be performed). Follow

directions on label of bottle.

3. Pour clean, hot water (from tap) into Filler Opening in the

Solution Tank -- use two (2) gallons of water.

4. Close Filler Opening.

FILLER

OPENING

SOLUTION

TANK

Fig. 4

NOTE: This unit may become damaged if boilingwater is used.

POWER CORO AND SWITCH

SeeFigure5

1. Plug Power Cord into electrical outlet.

2. Turn Power Switch to "ON* position.

SWITCH

POWER CORD

Continued-

Fig. 5

+ 11 hidden pages